[U-Boot] [PATCH 3/3] omap3_beagle: enable EHCI and USB storage.

[Paulraj, Sandeep]

> 
> The reset sequence/configuration for ehci is highly board specific,
> so this will be done in the source for the board, instead of
> introducing several CONFIG_* which would be needed to make those
> few lines in beagle.c usable across different OMAP boards.
> 
> Signed-off-by: Alexander Holler <holler at ahsoftware.de>
> ---

Thanks

Pushed to u-boot-ti.

In one patch I changed the patch subject line as it was too long.

--Sandeep