[U-Boot] [PATCH V2 03/15] atngw100: fix "#define XXXX 1"

Andreas Bießmann biessmann at corscience.de
Mon Apr 18 16:12:35 CEST 2011


Signed-off-by: Andreas Bießmann <biessmann at corscience.de>
---
No changes since V1

 include/configs/atngw100.h |   54 ++++++++++++++++++++++----------------------
 1 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index a93ba8b..70f1e8a 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -26,10 +26,10 @@
 
 #include <asm/arch/hardware.h>
 
-#define CONFIG_AVR32			1
-#define CONFIG_AT32AP			1
-#define CONFIG_AT32AP7000		1
-#define CONFIG_ATNGW100			1
+#define CONFIG_AVR32
+#define CONFIG_AT32AP
+#define CONFIG_AT32AP7000
+#define CONFIG_ATNGW100
 
 #define CONFIG_SYS_HZ				1000
 
@@ -38,8 +38,8 @@
  * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
  * and the PBA bus to run at 1/4 the PLL frequency.
  */
-#define CONFIG_PLL			1
-#define CONFIG_SYS_POWER_MANAGER		1
+#define CONFIG_PLL
+#define CONFIG_SYS_POWER_MANAGER
 #define CONFIG_SYS_OSC0_HZ			20000000
 #define CONFIG_SYS_PLL0_DIV			1
 #define CONFIG_SYS_PLL0_MUL			7
@@ -64,11 +64,11 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_USART1
 #define CONFIG_USART_ID			1
 /* User serviceable stuff */
-#define CONFIG_DOS_PARTITION		1
+#define CONFIG_DOS_PARTITION
 
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
 
 #define CONFIG_STACKSIZE		(2048)
 
@@ -83,8 +83,8 @@
  * data on the serial line may interrupt the boot sequence.
  */
 #define CONFIG_BOOTDELAY		1
-#define CONFIG_AUTOBOOT			1
-#define CONFIG_AUTOBOOT_KEYED		1
+#define CONFIG_AUTOBOOT
+#define CONFIG_AUTOBOOT_KEYED
 #define CONFIG_AUTOBOOT_PROMPT		\
 	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
 #define CONFIG_AUTOBOOT_DELAY_STR	"d"
@@ -95,8 +95,8 @@
  * should be generated and assigned to the environment variables
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
-#define CONFIG_OVERWRITE_ETHADDR_ONCE	1
-#define CONFIG_NET_MULTI		1
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_NET_MULTI
 
 /*
  * BOOTP/DHCP options
@@ -123,25 +123,25 @@
 #undef CONFIG_CMD_SOURCE
 #undef CONFIG_CMD_XIMG
 
-#define CONFIG_ATMEL_USART		1
-#define CONFIG_MACB			1
-#define CONFIG_PORTMUX_PIO		1
+#define CONFIG_ATMEL_USART
+#define CONFIG_MACB
+#define CONFIG_PORTMUX_PIO
 #define CONFIG_SYS_NR_PIOS			5
-#define CONFIG_SYS_HSDRAMC			1
-#define CONFIG_MMC			1
-#define CONFIG_ATMEL_MCI		1
-#define CONFIG_ATMEL_SPI		1
+#define CONFIG_SYS_HSDRAMC
+#define CONFIG_MMC
+#define CONFIG_ATMEL_MCI
+#define CONFIG_ATMEL_SPI
 
-#define CONFIG_SPI_FLASH		1
-#define CONFIG_SPI_FLASH_ATMEL		1
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
 
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
 
 #define CONFIG_NR_DRAM_BANKS		1
 
-#define CONFIG_SYS_FLASH_CFI			1
-#define CONFIG_FLASH_CFI_DRIVER		1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
 
 #define CONFIG_SYS_FLASH_BASE			0x00000000
 #define CONFIG_SYS_FLASH_SIZE			0x800000
@@ -154,7 +154,7 @@
 #define CONFIG_SYS_INTRAM_SIZE			INTERNAL_SRAM_SIZE
 #define CONFIG_SYS_SDRAM_BASE			EBI_SDRAM_BASE
 
-#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SIZE			65536
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE)
 
@@ -172,7 +172,7 @@
 #define CONFIG_SYS_CBSIZE			256
 #define CONFIG_SYS_MAXARGS			16
 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP			1
+#define CONFIG_SYS_LONGHELP
 
 #define CONFIG_SYS_MEMTEST_START		EBI_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + 0x1f00000)
-- 
1.7.2.5



More information about the U-Boot mailing list