[U-Boot] [PATCH 3/3] cpuat91: fix board support
Eric Bénard
eric at eukrea.com
Sun Apr 3 18:35:55 CEST 2011
- fix board support following relocation changes
- switch to boards.cfg
- disable i2c to keep size under 128kiB (1 sector)
Signed-off-by: Eric Bénard <eric at eukrea.com>
---
Makefile | 10 ---
board/eukrea/cpuat91/Makefile | 4 +-
board/eukrea/cpuat91/config.mk | 1 -
board/eukrea/cpuat91/cpuat91.c | 11 ++--
boards.cfg | 2 +
include/configs/cpuat91.h | 141 ++++++++++++++++++++++------------------
6 files changed, 87 insertions(+), 82 deletions(-)
delete mode 100644 board/eukrea/cpuat91/config.mk
diff --git a/Makefile b/Makefile
index 10a856a..aeb6e7c 100644
--- a/Makefile
+++ b/Makefile
@@ -749,16 +749,6 @@ M5485HFE_config : unconfig
#========================================================================
#########################################################################
-## Atmel AT91RM9200 Systems
-#########################################################################
-
-CPUAT91_RAM_config \
-CPUAT91_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91
-
-#########################################################################
## ARM926EJ-S Systems
#########################################################################
diff --git a/board/eukrea/cpuat91/Makefile b/board/eukrea/cpuat91/Makefile
index 15da3d8..1d62b13 100644
--- a/board/eukrea/cpuat91/Makefile
+++ b/board/eukrea/cpuat91/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := cpuat91.o
+COBJS := $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
@@ -38,7 +38,7 @@ clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
- rm -f $(LIB) core *.bak .depend
+ rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
diff --git a/board/eukrea/cpuat91/config.mk b/board/eukrea/cpuat91/config.mk
deleted file mode 100644
index 463f46b..0000000
--- a/board/eukrea/cpuat91/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21F00000
diff --git a/board/eukrea/cpuat91/cpuat91.c b/board/eukrea/cpuat91/cpuat91.c
index cd4d42c..4c4dad6 100644
--- a/board/eukrea/cpuat91/cpuat91.c
+++ b/board/eukrea/cpuat91/cpuat91.c
@@ -47,24 +47,23 @@ int board_init(void)
/* arch number of CPUAT91-Board */
gd->bd->bi_arch_number = MACH_TYPE_CPUAT91;
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((volatile long *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
return 0;
}
#ifdef CONFIG_DRIVER_AT91EMAC
int board_eth_init(bd_t *bis)
{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
+ return at91emac_register(bis, (u32) AT91_EMAC_BASE);
}
#endif
diff --git a/boards.cfg b/boards.cfg
index 2f0d1df..64b5f95 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -52,6 +52,8 @@ a320evb arm arm920t - faraday
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
eb_cpux9k2 arm arm920t - BuS at91
+cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
+cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
cmc_pu2 arm arm920t - - at91rm9200
csb637 arm arm920t - - at91rm9200
kb9202 arm arm920t - - at91rm9200
diff --git a/include/configs/cpuat91.h b/include/configs/cpuat91.h
index f31081d..cfaef15 100644
--- a/include/configs/cpuat91.h
+++ b/include/configs/cpuat91.h
@@ -26,30 +26,36 @@
#ifndef _CONFIG_CPUAT91_H
#define _CONFIG_CPUAT91_H
-#ifdef CONFIG_CPUAT91_RAM
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
+#include <asm/sizes.h>
+
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x21F00000
#else
#define CONFIG_BOOTDELAY 1
+#define CONFIG_SYS_TEXT_BASE 0
#endif
-#define AT91C_MAIN_CLOCK 179712000
-#define AT91C_MASTER_CLOCK 59904000
-
-#define AT91_SLOW_CLOCK 32768
+#define AT91C_XTAL_CLOCK 18432000
+#define AT91C_MAIN_CLOCK ((AT91C_XTAL_CLOCK / 4) * 39)
+#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
+#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
+#define CONFIG_SYS_HZ 1000
-#define CONFIG_ARM920T 1
-#define CONFIG_AT91RM9200 1
-#define CONFIG_CPUAT91 1
+#define CONFIG_ARM920T
+#define CONFIG_AT91RM9200
+#define CONFIG_CPUAT91
+#define CONFIG_AT91FAMILY
#undef CONFIG_USE_IRQ
-#define USE_920T_MMU 1
+#define USE_920T_MMU
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
+#define CONFIG_SYS_USE_MAIN_OSCILLATOR
/* flash */
#define CONFIG_SYS_MC_PUIA_VAL 0x00000000
#define CONFIG_SYS_MC_PUP_VAL 0x00000000
@@ -81,17 +87,15 @@
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART 1
-#define CONFIG_DBGU 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
+#define CONFIG_AT91RM9200_USART
+#define CONFIG_DBGU
#undef CONFIG_HARD_I2C
-#define CONFIG_SOFT_I2C 1
+#undef CONFIG_SOFT_I2C
#define AT91_PIN_SDA (1<<25)
#define AT91_PIN_SCL (1<<26)
-#define CONFIG_SYS_I2C_INIT_BOARD 1
+#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_SYS_I2C_SPEED 50000
#define CONFIG_SYS_I2C_SLAVE 0
@@ -117,70 +121,77 @@
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_MII 1
-#define CONFIG_CMD_CACHE 1
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_CACHE
#undef CONFIG_CMD_USB
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM 1
-#define CONFIG_CMD_I2C 1
+#ifdef CONFIG_SOFT_I2C
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#endif
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x02000000
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE (32 * 1024 * 1024)
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END \
- (CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512 * 1024)
+ (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024)
-#define CONFIG_NET_MULTI 1
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#define CONFIG_RMII 1
-#define CONFIG_MII 1
+#define CONFIG_NET_MULTI
+#define CONFIG_DRIVER_AT91EMAC
+#define CONFIG_SYS_RX_ETH_BUFFER 16
+#define CONFIG_RMII
+#define CONFIG_MII
#define CONFIG_DRIVER_AT91EMAC_PHYADDR 1
#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_KS8721_PHY 1
+#define CONFIG_KS8721_PHY
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_SYS_FLASH_EMPTY_INFO 1
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_PROTECTION 1
+#define CONFIG_SYS_FLASH_PROTECTION
#define PHYS_FLASH_1 0x10000000
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_MAX_FLASH_SECT 128
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
+#define PHYS_FLASH_SIZE (16 * 1024 * 1024)
+#define CONFIG_SYS_FLASH_BANKS_LIST \
+ { PHYS_FLASH_1 }
#if defined(CONFIG_CMD_USB)
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_AT91C_PQFP_UHPBU 1
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_AT91C_PQFP_UHPBU
#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
#endif
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000)
-#define CONFIG_ENV_SIZE 0x20000
-#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 128 * 1024)
+#define CONFIG_ENV_SIZE (128 * 1024)
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_SYS_LOAD_ADDR 0x21000000
@@ -192,29 +203,33 @@
#define CONFIG_SYS_MAXARGS 32
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_CMDLINE_EDITING 1
-#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
+#define CONFIG_SYS_MALLOC_LEN \
+ ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 4 * 1024)
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - \
+ GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
#define CONFIG_STACKSIZE (32 * 1024)
+#define CONFIG_STACKSIZE_IRQ (4 * 1024)
+#define CONFIG_STACKSIZE_FIQ (4 * 1024)
+
#if defined(CONFIG_USE_IRQ)
#error CONFIG_USE_IRQ not supported
#endif
-#define CONFIG_DEVICE_NULLDEV 1
-#define CONFIG_SILENT_CONSOLE 1
+#define CONFIG_DEVICE_NULLDEV
+#define CONFIG_SILENT_CONSOLE
-#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT \
"Press SPACE to abort autoboot\n"
#define CONFIG_AUTOBOOT_STOP_STR " "
#define CONFIG_AUTOBOOT_DELAY_STR "d"
-#define CONFIG_VERSION_VARIABLE 1
+#define CONFIG_VERSION_VARIABLE
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
#define MTDPARTS_DEFAULT \
--
1.7.4
More information about the U-Boot
mailing list