[U-Boot] [PATCH v5] MX31: Introduce get_reset_cause()

[Fabio Estevam]

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v4:
- Make get_reset_cause CPU specific code and no need to
add any board specific call.

 arch/arm/cpu/arm1136/mx31/generic.c |   29 ++++++++++++++++++++++++++++-
 1 files changed, 28 insertions(+), 1 deletions(-)

diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index 9b7a7a2..a92731e 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -132,11 +132,38 @@ char *get_cpu_rev(void)
 		return "unknown";
 }
 
+char *get_reset_cause(void)
+{
+	/* read RCSR register from CCM module */
+	struct clock_control_regs *ccm =
+		(struct clock_control_regs *)CCM_BASE;
+
+	u32 cause = readl(&ccm->rcsr) & 0x07;
+
+	switch (cause) {
+	case 0x0000:
+		return "POR";
+		break;
+	case 0x0001:
+		return "RST";
+		break;
+	case 0x0002:
+		return "WDOG";
+		break;
+	case 0x0006:
+		return "JTAG";
+		break;
+	default:
+		return "unknown reset";
+	}
+}
+
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo (void)
 {
-	printf("CPU:   Freescale i.MX31 rev %s at %d MHz\n",
+	printf("CPU:   Freescale i.MX31 rev %s at %d MHz.",
 			get_cpu_rev(), mx31_get_mcu_main_clk() / 1000000);
+	printf("Reset cause: %s\n", get_reset_cause());
 	return 0;
 }
 #endif
-- 
1.6.0.4