[U-Boot] [PATCH 9/9] cmd_sf: use cmd_usage() in more places

[Mike Frysinger]

Requires a little reworking of the code flow with sub-functions, but
not a big deal.

Signed-off-by: Mike Frysinger <vapier at gentoo.org>
---
 common/cmd_sf.c |   59 +++++++++++++++++++++++++++----------------------------
 1 files changed, 29 insertions(+), 30 deletions(-)

diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 3abc4ff..11a491d 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -70,30 +70,30 @@ static int do_spi_flash_probe(int argc, char * const argv[])
 	struct spi_flash *new;
 
 	if (argc < 2)
-		goto usage;
+		return -1;
 
 	cs = simple_strtoul(argv[1], &endp, 0);
 	if (*argv[1] == 0 || (*endp != 0 && *endp != ':'))
-		goto usage;
+		return -1;
 	if (*endp == ':') {
 		if (endp[1] == 0)
-			goto usage;
+			return -1;
 
 		bus = cs;
 		cs = simple_strtoul(endp + 1, &endp, 0);
 		if (*endp != 0)
-			goto usage;
+			return -1;
 	}
 
 	if (argc >= 3) {
 		speed = simple_strtoul(argv[2], &endp, 0);
 		if (*argv[2] == 0 || *endp != 0)
-			goto usage;
+			return -1;
 	}
 	if (argc >= 4) {
 		mode = simple_strtoul(argv[3], &endp, 16);
 		if (*argv[3] == 0 || *endp != 0)
-			goto usage;
+			return -1;
 	}
 
 	new = spi_flash_probe(bus, cs, speed, mode);
@@ -107,10 +107,6 @@ static int do_spi_flash_probe(int argc, char * const argv[])
 	flash = new;
 
 	return 0;
-
-usage:
-	puts("Usage: sf probe [bus:]cs [hz] [mode]\n");
-	return 1;
 }
 
 static int do_spi_flash_read_write(int argc, char * const argv[])
@@ -123,17 +119,17 @@ static int do_spi_flash_read_write(int argc, char * const argv[])
 	int ret;
 
 	if (argc < 4)
-		goto usage;
+		return -1;
 
 	addr = simple_strtoul(argv[1], &endp, 16);
 	if (*argv[1] == 0 || *endp != 0)
-		goto usage;
+		return -1;
 	offset = simple_strtoul(argv[2], &endp, 16);
 	if (*argv[2] == 0 || *endp != 0)
-		goto usage;
+		return -1;
 	len = simple_strtoul(argv[3], &endp, 16);
 	if (*argv[3] == 0 || *endp != 0)
-		goto usage;
+		return -1;
 
 	buf = map_physmem(addr, len, MAP_WRBACK);
 	if (!buf) {
@@ -154,10 +150,6 @@ static int do_spi_flash_read_write(int argc, char * const argv[])
 	}
 
 	return 0;
-
-usage:
-	printf("Usage: sf %s addr offset len\n", argv[0]);
-	return 1;
 }
 
 static int do_spi_flash_erase(int argc, char * const argv[])
@@ -168,15 +160,15 @@ static int do_spi_flash_erase(int argc, char * const argv[])
 	int ret;
 
 	if (argc < 3)
-		goto usage;
+		return -1;
 
 	offset = simple_strtoul(argv[1], &endp, 16);
 	if (*argv[1] == 0 || *endp != 0)
-		goto usage;
+		return -1;
 
 	ret = sf_parse_len_arg(argv[2], &len);
 	if (ret != 1)
-		goto usage;
+		return -1;
 
 	ret = spi_flash_erase(flash, offset, len);
 	if (ret) {
@@ -185,24 +177,25 @@ static int do_spi_flash_erase(int argc, char * const argv[])
 	}
 
 	return 0;
-
-usage:
-	puts("Usage: sf erase offset [+]len\n");
-	return 1;
 }
 
 static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	const char *cmd;
+	int ret;
 
 	/* need at least two arguments */
 	if (argc < 2)
 		goto usage;
 
 	cmd = argv[1];
+	--argc;
+	++argv;
 
-	if (strcmp(cmd, "probe") == 0)
-		return do_spi_flash_probe(argc - 1, argv + 1);
+	if (strcmp(cmd, "probe") == 0) {
+		ret = do_spi_flash_probe(argc, argv);
+		goto done;
+	}
 
 	/* The remaining commands require a selected device */
 	if (!flash) {
@@ -211,9 +204,15 @@ static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
 	}
 
 	if (strcmp(cmd, "read") == 0 || strcmp(cmd, "write") == 0)
-		return do_spi_flash_read_write(argc - 1, argv + 1);
-	if (strcmp(cmd, "erase") == 0)
-		return do_spi_flash_erase(argc - 1, argv + 1);
+		ret = do_spi_flash_read_write(argc, argv);
+	else if (strcmp(cmd, "erase") == 0)
+		ret = do_spi_flash_erase(argc, argv);
+	else
+		ret = -1;
+
+done:
+	if (ret != -1)
+		return ret;
 
 usage:
 	return cmd_usage(cmdtp);
-- 
1.7.5.rc1