[U-Boot] [PATCH] powerpc/85xx: Don't set FT_FSL_PCI_SETUP if CONFIG_PCI is not set

[Matthew McClintock]

A lot of boards set FT_FSL_PCI_SETUP directly in their board code
and don't check to see if CONFIG_PCI is actually defined. This
will cause the board compilation to fail if CONFIG_PCI is not
defined. The p1022ds board is one such example.

Instead of fixing every board this patch wraps FT_FSL_PCI_SETUP
around CONFIG_PCI so we can remove CONFIG_PCI and boards will
still build properly.

cc: Kumar Gala <kumar.gala at freescale.com>
Signed-off-by: Matthew McClintock <msm at freescale.com>
---
 arch/powerpc/include/asm/fsl_pci.h |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h
index 82d75be..fc47a9f 100644
--- a/arch/powerpc/include/asm/fsl_pci.h
+++ b/arch/powerpc/include/asm/fsl_pci.h
@@ -230,7 +230,9 @@ int fsl_pcie_init_board(int busno);
 #define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 3)
 #define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 4)
 
-#if defined(CONFIG_FSL_CORENET)
+#if !defined(CONFIG_PCI)
+#define FT_FSL_PCI_SETUP
+#elif defined(CONFIG_FSL_CORENET)
 #define FSL_PCIE_COMPAT	"fsl,p4080-pcie"
 #define FT_FSL_PCI_SETUP \
 	FT_FSL_PCIE1_SETUP; \
-- 
1.7.3.4