[U-Boot] [PATCH v3 4/4] ftsmc020: move ftsmc020 static mem controller to driver/mtd

Po-Yu Chuang ratbert.chuang at gmail.com
Thu Apr 28 09:47:06 CEST 2011


Hi Macpaul,

On Thu, Apr 28, 2011 at 3:33 PM, Macpaul Lin <macpaul at gmail.com> wrote:
> Hi Po-Yu,
>
> 2011/4/28 Po-Yu Chuang <ratbert.chuang at gmail.com>:
>> Hi Macpaul,
>>
>>> -#include <asm/arch/ftsmc020.h>
>>> +#define CONFIG_FTSMC020

This is for drivers/mtd/Makefile.

>>> +#include <faraday/ftsmc020.h>
>>>
>>>  #define FTSMC020_BANK0_CONFIG  (FTSMC020_BANK_ENABLE             |     \
>>>                                 FTSMC020_BANK_BASE(PHYS_FLASH_1) |     \
>>> @@ -196,6 +197,7 @@
>>>        { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, },      \
>>>        { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, },      \
>>>  }
>>> +#endif /* CONFIG_FTSMC020 */
>>
>> Looks like this #endif is unnecessary?
>
> At the time the patch has been generated, I could bulid a320evb.
> I'm not in the office in these 2 days.
> Could I check it and reply to you later?
>
> According to your reply, I guess I was meant to support
> #define CONFIG_FTSMC020 in board's config file.
>
> I'll check it later after 10:00 in Taiwan time. Sorry.

After removed the #endif line, it builds again.
I will submit a simple patch. Please check it later.

Thanks, :-)
Po-Yu Chuang


More information about the U-Boot mailing list