[U-Boot] [PATCH] S5PC2XX: GPIO Macro Values Corrected.

Chander Kashyap chander.kashyap at linaro.org
Thu Apr 14 11:17:29 CEST 2011


Macro values for Pull Up and Driver Strength were wrong.

Signed-off-by: Chander Kashyap <chander.kashyap at linaro.org>
---
 arch/arm/include/asm/arch-s5pc2xx/gpio.h |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-s5pc2xx/gpio.h
index 05e5b3e..7bfa8e8 100644
--- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h
+++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h
@@ -99,12 +99,12 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
 /* Pull mode */
 #define GPIO_PULL_NONE	0x0
 #define GPIO_PULL_DOWN	0x1
-#define GPIO_PULL_UP	0x2
+#define GPIO_PULL_UP	0x3
 
 /* Drive Strength level */
 #define GPIO_DRV_1X	0x0
-#define GPIO_DRV_2X	0x1
-#define GPIO_DRV_3X	0x2
+#define GPIO_DRV_2X	0x2
+#define GPIO_DRV_3X	0x1
 #define GPIO_DRV_4X	0x3
 #define GPIO_DRV_FAST	0x0
 #define GPIO_DRV_SLOW	0x1
-- 
1.7.1



More information about the U-Boot mailing list