[U-Boot] [GIT PULL] Pull request: u-boot-imx

Albert ARIBAUD albert.aribaud at free.fr
Tue Apr 5 19:13:59 CEST 2011


Hi Stefano,

Le 05/04/2011 15:29, Stefano Babic a écrit :
> Hi Albert,
>
> The following changes since commit 67a490d60d70f2b01d55976440ba30154af96965:
>
>    atmel_nand: don't require CONFIG_SYS_NAND_ENABLE_PIN (2011-04-01
> 14:49:08 -0500)
>
> are available in the git repository at:
>    git://www.denx.de/git/u-boot-imx.git master
>
> Fabio Estevam (1):
>        mx25: Make the UART port number explicit in its setup function
>
> Jason Liu (2):
>        mx53loco: set mmc env to MMC slot1
>        MX5: Enable flat-device-tree support on mx53 loco board
>
> Liu Hui-R64343 (3):
>        MX53: drop config.mk from mx53evk
>        MX53: support for freescale MX53LOCO board
>        MX5: Enable flat-device-tree support on mx51/53 evk board
>
> Stefano Babic (5):
>        Makefile: change rule to build IMX image
>        MX51: drop config.mk from mx51evk
>        MX31: add support for MX31 watchdog
>        MX31: qong: add watchdog
>        IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers
>
>   MAINTAINERS                                        |    1 +
>   Makefile                                           |    2 +-
>   arch/arm/cpu/arm1136/mx31/devices.c                |    4 +-
>   arch/arm/cpu/arm1136/mx31/generic.c                |    2 +-
>   arch/arm/cpu/arm1136/mx31/timer.c                  |   40 +++-
>   arch/arm/cpu/arm926ejs/mx25/generic.c              |    2 +-
>   arch/arm/include/asm/arch-mx31/{mx31.h =>  clock.h} |    6 +-
>   .../asm/arch-mx31/{mx31-regs.h =>  imx-regs.h}      |   10 +
>   board/davedenx/qong/fpga.c                         |    4 +-
>   board/davedenx/qong/lowlevel_init.S                |    2 +-
>   board/davedenx/qong/qong.c                         |   16 +-
>   board/freescale/mx31ads/lowlevel_init.S            |    2 +-
>   board/freescale/mx31ads/mx31ads.c                  |    4 +-
>   board/freescale/mx31pdk/lowlevel_init.S            |    2 +-
>   board/freescale/mx31pdk/mx31pdk.c                  |    4 +-
>   board/freescale/mx53evk/config.mk                  |   24 --
>   .../{mx51evk/config.mk =>  mx53loco/Makefile}       |   36 ++-
>   board/freescale/mx53loco/imximage.cfg              |   96 ++++++
>   board/freescale/mx53loco/mx53loco.c                |  316
> ++++++++++++++++++++
>   board/imx31_phycore/imx31_phycore.c                |    4 +-
>   board/imx31_phycore/lowlevel_init.S                |    2 +-
>   board/karo/tx25/tx25.c                             |    4 +-
>   board/logicpd/imx31_litekit/imx31_litekit.c        |    4 +-
>   board/logicpd/imx31_litekit/lowlevel_init.S        |    2 +-
>   boards.cfg                                         |    5 +-
>   drivers/gpio/mxc_gpio.c                            |    5 -
>   drivers/i2c/mxc_i2c.c                              |    7 +-
>   drivers/serial/serial_mxc.c                        |    4 -
>   drivers/spi/mxc_spi.c                              |    9 +-
>   drivers/usb/host/ehci-mxc.c                        |    2 +-
>   drivers/video/mx3fb.c                              |    6 +-
>   include/configs/imx31_litekit.h                    |    2 +-
>   include/configs/mx31ads.h                          |    2 +-
>   include/configs/mx31pdk.h                          |    2 +-
>   include/configs/mx51evk.h                          |    5 +
>   include/configs/mx53evk.h                          |    3 +
>   include/configs/mx53loco.h                         |  199 ++++++++++++
>   include/configs/qong.h                             |    3 +-
>   nand_spl/nand_boot_fsl_nfc.c                       |    4 -
>   39 files changed, 751 insertions(+), 96 deletions(-)
>   rename arch/arm/include/asm/arch-mx31/{mx31.h =>  clock.h} (92%)
>   rename arch/arm/include/asm/arch-mx31/{mx31-regs.h =>  imx-regs.h} (99%)
>   delete mode 100644 board/freescale/mx53evk/config.mk
>   rename board/freescale/{mx51evk/config.mk =>  mx53loco/Makefile} (51%)
>   create mode 100755 board/freescale/mx53loco/imximage.cfg
>   create mode 100755 board/freescale/mx53loco/mx53loco.c
>   create mode 100644 include/configs/mx53loco.h
>
> Best regards,
> Stefano

Applied, thanks.

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list