[U-Boot] [PATCH V2 0/3] Fix hang when loading U-Boot from SPI or NAND

Albert ARIBAUD albert.u.boot at aribaud.net
Fri Apr 15 07:02:08 CEST 2011


Hi Tom,

Le 15/04/2011 00:09, Tom Warren a écrit :
> This series of patches fixes a hang seen when loading U-Boot from SPI
> or NAND on Seaboard and Harmony due to a missing PLLX init. It also
> corrects a UARTD bit error in clk_rst.h, and adds rudimentary GPIO
> support so that the UART on Seaboard can be used by U-Boot (UARTD&
> SPIFLASH are muxed, and the default POR setting is for SPI access, so
> GPIO_PI3 has to be driven low to enable serial console I/O over UARTD).
> Harmony has no SPIFLASH, so the issue doesn't exist there.
>
> With these changes, I can write U-Boot to SPI on Seaboard and boot with
> it to the U-Boot cmd prompt. This should also apply to loading from NAND
> on Seaboard and Harmony - testing to follow.
>
> Changes in V2:
> 	- Change 2nd patch's description to 'Add basic GPIO definitions'
> 	- Add more descriptive comment for CPCON use in init_pllx

Next time you post an updated patchset, please put patch 
history/changelog in the patches themselves.

I'll pull these in tomorrow morning unless someone requests changes in 
the meantime.

Amicalement,
-- 
Albert.


More information about the U-Boot mailing list