[U-Boot] [PATCH V8 0/6] add i2c support to pantheon and aramada100

Prafulla Wadaskar prafulla at marvell.com
Wed Apr 13 16:01:36 CEST 2011



> -----Original Message-----
> From: Lei Wen [mailto:leiwen at marvell.com]
> Sent: Tuesday, April 05, 2011 1:31 PM
> To: Heiko Schocher; Prafulla Wadaskar; Wolfgang Denk; u-
> boot at lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan Sarnaik; Yu
> Tang; adrian.wenl at gmail.com
> Subject: [PATCH V8 0/6] add i2c support to pantheon and aramada100
> 
> V2:
> rename the previous pxa_i2c to mvi2c, since this driver would be shared
> by many other Marvell platforms.
> 
> V3:
> Clean the code sytle issue
> 
> V4:
> add and* and or* to make set bit operation generic
> Also make i2c definition included in the ifdef
> 
> V5:
> Fix code style issue of the first patch
> 
> V6:
> Seperate the and* and or* patch out of the patch set
> Move CONFIG_CMD_I2C define place
> 
> V7:
> Fix comments style
> Make global change from PXA to MV
> Move i2c config setting to <arch/config>
> 
> V8:
> Seperate timeout fix patch out
> 
> Lei Wen (6):
>   pxa: move i2c driver to the common place
>   mv_i2c: fix timeout value to be consistent with comments
>   mv_i2c: use structure to replace the direclty define
>   I2C: add i2c support for Pantheon platform
>   I2C: mv_i2c: add multi bus support
>   I2C: add i2c support for Armada100 platform
> 
>  arch/arm/cpu/arm926ejs/armada100/cpu.c       |   16 +
>  arch/arm/cpu/arm926ejs/pantheon/cpu.c        |   12 +
>  arch/arm/cpu/pxa/Makefile                    |    1 -
>  arch/arm/cpu/pxa/cpu.c                       |   10 +
>  arch/arm/cpu/pxa/i2c.c                       |  469 -------------------
> ------
>  arch/arm/include/asm/arch-armada100/config.h |   12 +
>  arch/arm/include/asm/arch-armada100/mfp.h    |   40 ++-
>  arch/arm/include/asm/arch-pantheon/config.h  |   10 +
>  arch/arm/include/asm/arch-pantheon/cpu.h     |    4 +-
>  arch/arm/include/asm/arch-pantheon/mfp.h     |    6 +-
>  arch/arm/include/asm/arch-pxa/pxa-regs.h     |   56 ---
>  board/Marvell/aspenite/aspenite.c            |    5 +
>  board/Marvell/dkb/dkb.c                      |    4 +
>  board/innokom/innokom.c                      |    9 +-
>  drivers/i2c/Makefile                         |    1 +
>  drivers/i2c/mv_i2c.c                         |  481
> ++++++++++++++++++++++++++
>  drivers/i2c/mv_i2c.h                         |   83 +++++
>  include/configs/aspenite.h                   |    1 +
>  include/configs/dkb.h                        |    2 +
>  include/configs/innokom.h                    |    2 +
>  include/configs/xm250.h                      |    2 +
>  21 files changed, 671 insertions(+), 555 deletions(-)
>  delete mode 100644 arch/arm/cpu/pxa/i2c.c
>  create mode 100644 drivers/i2c/mv_i2c.c
>  create mode 100644 drivers/i2c/mv_i2c.h

Dear Lei
I have trying to apply this patch series to u-boot-marvell.git master branch.
Since I have rebased this branch to latest u-boot-arm.git master.

This patch series cannot be cleanly applied.

Can you pls provide new one in sync with latest pull from u-boot-marvell.git master branch?

Regards..
Prafulla . .



More information about the U-Boot mailing list