[U-Boot] [PATCH 3/6] Blackfin: bf537-stamp: drop uart/flash post tests

[Mike Frysinger]

The flash code has been generalized for everyone, and the uart stub
is simply useless.

Signed-off-by: Mike Frysinger <vapier at gentoo.org>
---
 board/bf537-stamp/post.c |   54 ----------------------------------------------
 1 files changed, 0 insertions(+), 54 deletions(-)

diff --git a/board/bf537-stamp/post.c b/board/bf537-stamp/post.c
index 5007fcb..f35cc8e 100644
--- a/board/bf537-stamp/post.c
+++ b/board/bf537-stamp/post.c
@@ -14,60 +14,6 @@
 #include <asm/blackfin.h>
 #include <asm/gpio.h>
 
-int uart_post_test(int flags)
-{
-	return 0;
-}
-
-#define BLOCK_SIZE 0x10000
-#define VERIFY_ADDR 0x2000000
-extern int erase_block_flash(int);
-extern int write_data(long lStart, long lCount, uchar * pnData);
-int flash_post_test(int flags)
-{
-	unsigned short *pbuf, *temp;
-	int offset, n, i;
-	int value = 0;
-	int result = 0;
-	printf("\n");
-	pbuf = (unsigned short *)VERIFY_ADDR;
-	temp = pbuf;
-	for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
-		offset = (n - 7) * BLOCK_SIZE;
-		printf("--------Erase   block:%2d..", n);
-		erase_block_flash(n);
-		printf("OK\r");
-		printf("--------Program block:%2d...", n);
-		write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
-		printf("OK\r");
-		printf("--------Verify  block:%2d...", n);
-		for (i = 0; i < BLOCK_SIZE; i += 2) {
-			if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
-			    *temp++) {
-				value = 1;
-				result = 1;
-			}
-		}
-		if (value)
-			printf("failed\n");
-		else
-			printf("OK		%3d%%\r",
-			       (int)(
-				     (n + 1 -
-				      FLASH_START_POST_BLOCK) *
-				     100 / (FLASH_END_POST_BLOCK -
-					    FLASH_START_POST_BLOCK)));
-
-		temp = pbuf;
-		value = 0;
-	}
-	printf("\n");
-	if (result)
-		return -1;
-	else
-		return 0;
-}
-
 /****************************************************
  * LED1 ---- PF6	LED2 ---- PF7		    *
  * LED3 ---- PF8	LED4 ---- PF9		    *
-- 
1.7.6