[U-Boot] [PATCH] NAND: Allow per-buffer allocation

[Marek Vasut]

Don't allocate NAND buffers as one block, but allocate them separately. This
allows systems where DMA to buffers happen to allocate these buffers properly
aligned.

Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
---
 drivers/mtd/nand/nand_base.c |   27 +++++++++++++++++++++------
 include/linux/mtd/nand.h     |    7 ++++---
 2 files changed, 25 insertions(+), 9 deletions(-)

NOTE: This less intrusive approach should avoid breaking older drivers (this is
the reason for malloc()ing chip->buffers).

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1a95a91..be8469c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2749,12 +2749,25 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
  */
 int nand_scan_tail(struct mtd_info *mtd)
 {
-	int i;
+	int i, bufsize;
+	uint8_t *buf;
 	struct nand_chip *chip = mtd->priv;
 
-	if (!(chip->options & NAND_OWN_BUFFERS))
-		chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
-	if (!chip->buffers)
+	if (!(chip->options & NAND_OWN_BUFFERS)) {
+		chip->buffers = malloc(sizeof(struct nand_buffers));
+		if (!chip->buffers)
+			return -ENOMEM;
+
+		bufsize = NAND_MAX_PAGESIZE + (3 * NAND_MAX_OOBSIZE);
+		buf = malloc(bufsize);
+
+		chip->buffers->buffer = (struct nand_buffers *)buf;
+		chip->buffers->ecccalc = buf;
+		chip->buffers->ecccode = buf + NAND_MAX_OOBSIZE;
+		chip->buffers->databuf = buf + (2 * NAND_MAX_OOBSIZE);
+	}
+
+	if (!chip->buffers->buffer)
 		return -ENOMEM;
 
 	/* Set the internal oob buffer location, just after the page data */
@@ -2996,6 +3009,8 @@ void nand_release(struct mtd_info *mtd)
 
 	/* Free bad block table memory */
 	kfree(chip->bbt);
-	if (!(chip->options & NAND_OWN_BUFFERS))
-		kfree(chip->buffers);
+	if (!(chip->options & NAND_OWN_BUFFERS)) {
+		free(chip->buffers->buffer);
+		free(chip->buffers);
+	}
 }
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 987a2ec..c3449a9 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -370,9 +370,10 @@ struct nand_ecc_ctrl {
  * consecutive order.
  */
 struct nand_buffers {
-	uint8_t	ecccalc[NAND_MAX_OOBSIZE];
-	uint8_t	ecccode[NAND_MAX_OOBSIZE];
-	uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE];
+	uint8_t *buffer;
+	uint8_t	*ecccalc;
+	uint8_t	*ecccode;
+	uint8_t *databuf;
 };
 
 /**
-- 
1.7.5.4