[U-Boot] [PATCH 8/9] DM9000: change some printf to use debug instead

[Eric Jarrige]

Signed-off-by: Eric Jarrige <eric.jarrige at armadeus.org>
Cc: Ben Warren <biggerbadderben at gmail.com>
---
 drivers/net/dm9000x.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index b5c5573..9cd0195 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -232,7 +232,7 @@ dm9000_probe(void)
 	id_val |= DM9000_ior(DM9000_PIDL) << 16;
 	id_val |= DM9000_ior(DM9000_PIDH) << 24;
 	if (id_val == DM9000_ID) {
-		printf("dm9000 i/o: 0x%x, id: 0x%x \n", CONFIG_DM9000_BASE,
+		DM9000_DBG("dm9000 i/o: 0x%x, id: 0x%x \n", CONFIG_DM9000_BASE,
 		       id_val);
 		return 0;
 	} else {
@@ -298,19 +298,19 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
 
 	switch (io_mode) {
 	case 0x0:  /* 16-bit mode */
-		printf("DM9000: running in 16 bit mode\n");
+		DM9000_DBG("DM9000: running in 16 bit mode\n");
 		db->outblk    = dm9000_outblk_16bit;
 		db->inblk     = dm9000_inblk_16bit;
 		db->rx_status = dm9000_rx_status_16bit;
 		break;
 	case 0x01:  /* 32-bit mode */
-		printf("DM9000: running in 32 bit mode\n");
+		DM9000_DBG("DM9000: running in 32 bit mode\n");
 		db->outblk    = dm9000_outblk_32bit;
 		db->inblk     = dm9000_inblk_32bit;
 		db->rx_status = dm9000_rx_status_32bit;
 		break;
 	case 0x02: /* 8 bit mode */
-		printf("DM9000: running in 8 bit mode\n");
+		DM9000_DBG("DM9000: running in 8 bit mode\n");
 		db->outblk    = dm9000_outblk_8bit;
 		db->inblk     = dm9000_inblk_8bit;
 		db->rx_status = dm9000_rx_status_8bit;