[U-Boot] [PATCH v2] Phy/Marvell: Rewrite the MV88E1111 phy config function based on kernel code

[Wolfgang Denk]

Dear Roy Zang,

In message <1319777529-28654-1-git-send-email-tie-fei.zang at freescale.com> you wrote:
> The original m88e1111s_config() does not do the SGMII mode
> initialization and is buggy. Rewrite the function according to
> 3.0.6 kernel function m88e1111_config_init() in drivers/net/phy/marvell.c
> 
> Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
> Acked-by: Andy Fleming <afleming at freescale.com>
> Cc: Kumar Gala <galak at kernel.crashing.org>
> ---
> v2: Use timeout instead of infinite loop
> 
>  drivers/net/phy/marvell.c |  113 ++++++++++++++++++++++++++++++++++++++++++--
>  1 files changed, 107 insertions(+), 6 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Never ascribe to malice that which can  adequately  be  explained  by
stupidity.