December 2011 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Thu Dec 1 00:50:50 CET 2011
Ending: Sat Dec 31 15:31:34 CET 2011
Messages: 2666

• [U-Boot] (no subject)   larrybizz at aol.com
• [U-Boot] (no subject)   larrybizz at aol.com
• [U-Boot] [ARM] Pending patches for december release?   Albert ARIBAUD
• [U-Boot] [ARM] Pending patches for december release?   Tom Rini
• [U-Boot] [ARM] Pending patches for december release?   Simon Schwarz
• [U-Boot] [ARM] Pending patches for december release?   Holger Brunck
• [U-Boot] [ARM] Pending patches for december release?   Sughosh Ganu
• [U-Boot] [ARM] Pending patches for december release?   Anatolij Gustschin
• [U-Boot] [ARM] Pending patches for december release?   Tom Rini
• [U-Boot] [ARM] Pending patches for december release?   Simon Schwarz
• [U-Boot] [ARM] Pending patches for december release?   Prafulla Wadaskar
• [U-Boot] [ARM] Pending patches for december release?   Tom Rini
• [U-Boot] [ARM] Pending patches for december release?   Wolfgang Denk
• [U-Boot] [ARM] Pending patches for december release?   Simon Glass
• [U-Boot] [ARM] Pending patches for december release?   Stephen Warren
• [U-Boot] [ARM] Pending patches for december release?   Simon Glass
• [U-Boot] [ARM] Pending patches for december release?   Wolfgang Denk
• [U-Boot] [ARM] Pending patches for december release?   Simon Glass
• [U-Boot] [ARM] Pending patches for december release?   Albert ARIBAUD
• [U-Boot] [ARM] Pending patches for december release?   Albert ARIBAUD
• [U-Boot] [ARM] Pending patches for december release?   Albert ARIBAUD
• [U-Boot] [ARM] Pending patches for december release?   Albert ARIBAUD
• [U-Boot] [ARM] Pending patches for december release?   Tom Rini
• [U-Boot] [ARM]: File type for u-boot elf file   rojan
• [U-Boot] [ARM]: File type for u-boot elf file   Tom Rini
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Stefano Babic
• [U-Boot] [GIT PULL] Pull request: u-boot-imx   Albert ARIBAUD
• [U-Boot] [GIT PULL] Please pull powerpc/mpc83xx: set TXEQA/TXEQE value for mpc837XE sata   Wolfgang Denk
• [U-Boot] [GIT PULL] Please pull powerpc/mpc83xx: set TXEQA/TXEQE value for mpc837XE sata   Kim Phillips
• [U-Boot] [GIT PULL] please pull u-boot-mpc83xx fixes   Kim Phillips
• [U-Boot] [GIT PULL] please pull u-boot-mpc83xx fixes   Wolfgang Denk
• [U-Boot] [GIT PULL] please pull u-boot-mpc85xx   Kumar Gala
• [U-Boot] [GIT PULL] please pull u-boot-mpc85xx   Wolfgang Denk
• [U-Boot] [GIT PULL] Pull request u-boot-85xx.git   Wolfgang Denk
• [U-Boot] [GIT PULL] Pull request u-boot-85xx.git   Kumar Gala
• [U-Boot] [GIT PULL] Pull request u-boot-85xx.git   Wolfgang Denk
• [U-Boot] [GIT PULL] Pull request u-boot-staging   Stefano Babic
• [U-Boot] [GIT PULL] Pull request u-boot-staging   Wolfgang Denk
• [U-Boot] [PATCH 0/10] Unified command execution in one place   Simon Glass
• [U-Boot] [PATCH 0/14] tegra: warmboot (suspend / resume) support   Simon Glass
• [U-Boot] [PATCH 0/1]: USB: Fix ARM CONFIG_USB_TTY boards   Tom Rini
• [U-Boot] [PATCH 0/2] *** Add ext4 filesystem support in uboot ***   Wolfgang Denk
• [U-Boot] [PATCH 0/2] *** Add ext4 filesystem support in uboot ***   uma.shankar at samsung.com
• [U-Boot] [PATCH 0/2] Add support for the 32 bit boot protocol to the x86 zboot command.   Graeme Russ
• [U-Boot] [PATCH 0/2] Add support for the 32 bit boot protocol to the x86 zboot command.   Gabe Black
• [U-Boot] [PATCH 0/2] Add support for the 32 bit boot protocol to the x86 zboot command.   Graeme Russ
• [U-Boot] [PATCH 0/2] da850_am18xxevm: Add an SPL to boot from SPI flash   Christian Riesch
• [U-Boot] [PATCH 0/2] Exynos Related fixes   Chander Kashyap
• [U-Boot] [PATCH 0/2] Network support for Calxeda highbank   Rob Herring
• [U-Boot] [PATCH 0/2] Use lldiv from div64.h for 64-bit divisions   Christian Riesch
• [U-Boot] [PATCH 0/3] Add i2c TPM driver   Che-Liang Chiou
• [U-Boot] [PATCH 0/3] Added SPL support   Chandan Nath
• [U-Boot] [PATCH 0/3] Added SPL support   Tom Rini
• [U-Boot] [PATCH 0/3] i.mx6q: Add the ethernet function support   Jason Liu
• [U-Boot] [PATCH 0/3] i.mx6q: Add the ethernet function support   Dirk Behme
• [U-Boot] [PATCH 0/3] Some GCC 4.6 build warning fixes for MIPS boards   Wolfgang Denk
• [U-Boot] [PATCH 0/4] Cleanups and updates for ULPI   Igor Grinberg
• [U-Boot] [PATCH 0/4] use CFI driver for all MPL boards   David Müller
• [U-Boot] [PATCH 0/6] Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH 0/6] OMAP4: USB: Add omap-ehci support and enable same for panda   Govindraj.R
• [U-Boot] [PATCH 0/6] OMAP4: USB: Add omap-ehci support and enable same for panda   Govindraj.R
• [U-Boot] [PATCH 0/6] tegra: Enable keyboard with matrix keyboard driver   Simon Glass
• [U-Boot] [PATCH 0/7] CHECKPATCH: Cleanup LCD logo files   Marek Vasut
• [U-Boot] [PATCH 0/7] CHECKPATCH: Cleanup LCD logo files   Mike Frysinger
• [U-Boot] [PATCH 0/7] CHECKPATCH: Cleanup LCD logo files   Marek Vasut
• [U-Boot] [PATCH 0/7] tegra: Add I2C driver and associated parts   Simon Glass
• [U-Boot] [PATCH 0/8] AM3517 EVM / Crane enhancements   Tom Rini
• [U-Boot] [PATCH 0/9] mkenvimage: v10/v11 diff split into several patches   David Wagner
• [U-Boot] [PATCH 0/9] mkenvimage: v10/v11 diff split into several patches   Stefano Babic
• [U-Boot] [PATCH 0/9] More GCC 4.6 cleanup patches   Wolfgang Denk
• [U-Boot] [PATCH 0/9] MX5x USB support   Marek Vasut
• [U-Boot] [PATCH 0/9] MX5x USB support   Marek Vasut
• [U-Boot] [PATCH 0/9] MX5x USB support   Wolfgang Grandegger
• [U-Boot] [PATCH 0/9] MX5x USB support   Remy Bohmer
• [U-Boot] [PATCH 0/9] MX5x USB support   Remy Bohmer
• [U-Boot] [PATCH 0/9] MX5x USB support   Marek Vasut
• [U-Boot] [PATCH 0/9] MX5x USB support   Marek Vasut
• [U-Boot] [PATCH 00/13] ARM: more cleanups   Wolfgang Denk
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Stefan Roese
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Anatolij Gustschin
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Stefan Roese
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Wolfgang Denk
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Matthias Fuchs
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Matthias Fuchs
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Stefan Roese
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Anatolij Gustschin
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Mike Frysinger
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Mike Frysinger
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Mike Frysinger
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Wolfgang Denk
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Wolfgang Denk
• [U-Boot] [PATCH 00/18 V2] CHECKPATCH: fpgadata.c cleanup   Wolfgang Denk
• [U-Boot] [PATCH 00/18] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18] CHECKPATCH: fpgadata.c cleanup   Graeme Russ
• [U-Boot] [PATCH 00/18] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 00/18] CHECKPATCH: fpgadata.c cleanup   Graeme Russ
• [U-Boot] [PATCH 00/18] CHECKPATCH: fpgadata.c cleanup   Marek Vasut
• [U-Boot] [PATCH 01/10] Remove CMD_PXE's static on run_command()   Simon Glass
• [U-Boot] [PATCH 01/11] MIPS: board.c: make checkpatch.pl clean   Wolfgang Denk
• [U-Boot] [PATCH 01/13] davinci_emac: move arch-independent defines to separate header   Ilya Yanok
• [U-Boot] [PATCH 01/13] davinci_emac: move arch-independent defines to separate header   Igor Grinberg
• [U-Boot] [PATCH 01/13] davinci_emac: move arch-independent defines to separate header   Tom Rini
• [U-Boot] [PATCH 01/13] davinci_emac: move arch-independent defines to separate header   Igor Grinberg
• [U-Boot] [PATCH 01/13] drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 01/14] Add AES crypto library   Simon Glass
• [U-Boot] [PATCH 01/14] alpr board: Fix GCC 4.6 build warnings   Stefan Roese
• [U-Boot] [PATCH 01/14] alpr board: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 01/14] fdt: Tidy up a few fdtdec problems   Simon Glass
• [U-Boot] [PATCH 01/15] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params   Pali Rohár
• [U-Boot] [PATCH 01/16] arch/arm/cpu/armv7/omap3/lowlevel_init.S: save_boot_params   Pali Rohár
• [U-Boot] [PATCH 01/18 V2] CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 01/18 V2] CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 01/18 V2] CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 01/18] CHECKPATCH: ./board/esd/hh405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 02/10] Rename run_command() to builtin_run_command()   Simon Glass
• [U-Boot] [PATCH 02/11] MIPS: board.c: fix warning if CONFIG_CMD_NET is not defined   Wolfgang Denk
• [U-Boot] [PATCH 02/11] MIPS: board.c: fix warning if CONFIG_CMD_NET is not defined   Daniel Schwierzeck
• [U-Boot] [PATCH 02/13] drivers/net/at91_emac.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 02/13] drivers/net/at91_emac.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 02/14] board/amirix/ap1000/flash.c: Fix GCC 4.6 build warning   Marek Vasut
• [U-Boot] [PATCH 02/14] board/amirix/ap1000/flash.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Jerry Van Baren
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Stephen Warren
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Jerry Van Baren
• [U-Boot] [PATCH 02/14] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [U-Boot] [PATCH 02/14] tegra: Move ap20.h header into arch location   Simon Glass
• [U-Boot] [PATCH 02/15] arch/arm/lib/bootm.c: Optionally use existing atags   Pali Rohár
• [U-Boot] [PATCH 02/16] arch/arm/lib/bootm.c: Optionally use existing atags   Pali Rohár
• [U-Boot] [PATCH 02/16] arch/arm/lib/bootm.c: Optionally use existing atags   Mike Frysinger
• [U-Boot] [PATCH 02/16] arch/arm/lib/bootm.c: Optionally use existing atags   Pali Rohár
• [U-Boot] [PATCH 02/18 V2] CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 02/18 V2] CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 02/18 V2] CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 02/18] CHECKPATCH: ./board/esd/pci405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 02/19] usbdev.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 02/19] usbdev.c: Fix GCC 4.6 build warnings   Stefan Roese
• [U-Boot] [PATCH 02/19] usbdev.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 03/10] Rename run_command2() to run_command()   Simon Glass
• [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)   William Juul (wiljuul)
• [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)   Wolfgang Denk
• [U-Boot] [PATCH 03/13] fs/yaffs2/yaffs_guts.c: Fix GCC 4.6 compile warning (and bug)   Wolfgang Denk
• [U-Boot] [PATCH 03/14] drivers/block/sata_dwc.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 03/14] tegra: Add crypto library for warmboot code   Simon Glass
• [U-Boot] [PATCH 03/15] include/twl4030.h: Add power bus message definitions   Pali Rohár
• [U-Boot] [PATCH 03/16] include/twl4030.h: Add power bus message definitions   Pali Rohár
• [U-Boot] [PATCH 03/18 V2] CHECKPATCH: ./board/esd/du405/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 03/18 V2] CHECKPATCH: ./board/esd/du405/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 03/18 V2] CHECKPATCH: ./board/esd/du405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 03/18] CHECKPATCH: ./board/esd/tasreg/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 04/10] Stop using builtin_run_command()   Simon Glass
• [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning   Jason Hobbs
• [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning   Wolfgang Denk
• [U-Boot] [PATCH 04/13] common/cmd_pxe.c: Fix compile warning   Jason Hobbs
• [U-Boot] [PATCH 04/14] board/cray/L1/flash.c: Fix GCC 4.6 build warning   Marek Vasut
• [U-Boot] [PATCH 04/14] board/cray/L1/flash.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 04/14] tegra: Add flow, gp_padctl, fuse, sdram headers   Simon Glass
• [U-Boot] [PATCH 04/15] include/common.h: Add some ANSI escape codes definitions   Pali Rohár
• [U-Boot] [PATCH 04/16] include/common.h: Add some ANSI escape codes definitions   Pali Rohár
• [U-Boot] [PATCH 04/18 V2] CHECKPATCH: ./board/esd/canbt/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 04/18 V2] CHECKPATCH: ./board/esd/canbt/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 04/18 V2] CHECKPATCH: ./board/esd/canbt/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 04/18] CHECKPATCH: ./board/esd/apc405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 05/10] Don't include standard parser if hush is used   Simon Glass
• [U-Boot] [PATCH 05/13] boards.cfg: sort list   Wolfgang Denk
• [U-Boot] [PATCH 05/13] boards.cfg: sort list   Wolfgang Denk
• [U-Boot] [PATCH 05/13] boards.cfg: sort list   Mike Frysinger
• [U-Boot] [PATCH 05/13] boards.cfg: sort list   Wolfgang Denk
• [U-Boot] [PATCH 05/14] DB64360: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 05/14] tegra: Add tegra_get_chip_type() to detect SKU   Simon Glass
• [U-Boot] [PATCH 05/14] tegra: fdt: Add Tegra2x device tree file   Simon Glass
• [U-Boot] [PATCH 05/14] tegra: fdt: Add Tegra2x device tree file   Stephen Warren
• [U-Boot] [PATCH 05/14] tegra: fdt: Add Tegra2x device tree file   Simon Glass
• [U-Boot] [PATCH 05/15] common/main.c: Fix function readline   Pali Rohár
• [U-Boot] [PATCH 05/16] common/main.c: Fix function readline   Pali Rohár
• [U-Boot] [PATCH 05/16] common/main.c: Fix function readline   Mike Frysinger
• [U-Boot] [PATCH 05/16] common/main.c: Fix function readline   Pali Rohár
• [U-Boot] [PATCH 05/18 V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c   Marek Vasut
• [U-Boot] [PATCH 05/18 V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c   Wolfgang Denk
• [U-Boot] [PATCH 05/18 V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c   Anatolij Gustschin
• [U-Boot] [PATCH 05/18] CHECKPATCH: ./board/esd/voh405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 06/10] Create a single cmd_call() function to handle command execution   Simon Glass
• [U-Boot] [PATCH 06/13] board/apollon/apollon.c: Fix GCc 4.6 build warnings.   Wolfgang Denk
• [U-Boot] [PATCH 06/13] board/apollon/apollon.c: Fix GCc 4.6 build warnings.   Wolfgang Denk
• [U-Boot] [PATCH 06/14] DB64460: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 06/14] tegra: Add EMC support for optimal memory timings   Simon Glass
• [U-Boot] [PATCH 06/15] drivers/video/cfb_console.c: Fix function console_scrollup   Pali Rohár
• [U-Boot] [PATCH 06/16] drivers/video/cfb_console.c: Fix function console_scrollup   Pali Rohár
• [U-Boot] [PATCH 06/18 V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c   Marek Vasut
• [U-Boot] [PATCH 06/18 V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c   Wolfgang Denk
• [U-Boot] [PATCH 06/18 V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c   Anatolij Gustschin
• [U-Boot] [PATCH 06/18] CHECKPATCH: ./board/esd/ash405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 07/10] Remove interleave of non-U-Boot code in hush   Simon Glass
• [U-Boot] [PATCH 07/13] board/apollon/sys_info.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 07/13] board/apollon/sys_info.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 07/14] board/sandburst/common/flash.c: Fix GCC 4.6 build warning   Marek Vasut
• [U-Boot] [PATCH 07/14] board/sandburst/common/flash.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 07/14] tegra: Add PMU to manage power supplies   Simon Glass
• [U-Boot] [PATCH 07/15] drivers/video/cfb_console.c: Add function console_clear and console_clear_line   Pali Rohár
• [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors   Mike Frysinger
• [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors   Pali Rohár
• [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors   Mike Frysinger
• [U-Boot] [PATCH 07/16] drivers/video/cfb_console.c: Add function console_swap_colors   Pali Rohár
• [U-Boot] [PATCH 07/18 V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c   Marek Vasut
• [U-Boot] [PATCH 07/18 V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c   Wolfgang Denk
• [U-Boot] [PATCH 07/18 V2] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c   Anatolij Gustschin
• [U-Boot] [PATCH 07/18] CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 08/10] Add cmd_process() to process commands in one place   Simon Glass
• [U-Boot] [PATCH 08/13] ARM: convert "apollon" board to use boards.cfg   Wolfgang Denk
• [U-Boot] [PATCH 08/13] ARM: convert "apollon" board to use boards.cfg   Wolfgang Denk
• [U-Boot] [PATCH 08/14] drivers/usb/host/sl811-hcd.c: Fix GCC 4.6 build warning   Marek Vasut
• [U-Boot] [PATCH 08/14] drivers/usb/host/sl811-hcd.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 08/14] drivers/usb/host/sl811-hcd.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 08/14] tegra: Set up PMU for Nvidia boards   Simon Glass
• [U-Boot] [PATCH 08/15] drivers/video/cfb_console.c: Add functions for moving with cursor   Pali Rohár
• [U-Boot] [PATCH 08/16] drivers/video/cfb_console.c: Add function console_clear and console_clear_line   Mike Frysinger
• [U-Boot] [PATCH 08/16] drivers/video/cfb_console.c: Add function console_clear and console_clear_line   Pali Rohár
• [U-Boot] [PATCH 08/18 V2] CHECKPATCH: ./board/esd/wuh405/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 08/18 V2] CHECKPATCH: ./board/esd/wuh405/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 08/18 V2] CHECKPATCH: ./board/esd/wuh405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 08/18] CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c   Marek Vasut
• [U-Boot] [PATCH 09/10] Correctly handle input files beginning with several newlines   David Wagner
• [U-Boot] [PATCH 09/10] Use CMD_RET_usage in i2c   Simon Glass
• [U-Boot] [PATCH 09/10] Use CMD_RET_usage in i2c   Heiko Schocher
• [U-Boot] [PATCH 09/10] Use CMD_RET_usage in i2c   Simon Glass
• [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning   Wolfgang Denk
• [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning   Wolfgang Denk
• [U-Boot] [PATCH 09/13] board/LaCie/edminiv2/edminiv2.c: Fix build warning   Simon Guinot
• [U-Boot] [PATCH 09/14] post/board/lwmon5/gdc.c: Fix GCC 4.6 build warning   Stefan Roese
• [U-Boot] [PATCH 09/14] post/board/lwmon5/gdc.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 09/14] tegra: Add warmboot implementation   Simon Glass
• [U-Boot] [PATCH 09/14] tegra: usb: Add support for data alignment and txfifo threshold   Simon Glass
• [U-Boot] [PATCH 09/15] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes   Pali Rohár
• [U-Boot] [PATCH 09/16] drivers/video/cfb_console.c: Add functions for moving with cursor   Mike Frysinger
• [U-Boot] [PATCH 09/16] drivers/video/cfb_console.c: Add functions for moving with cursor   Pali Rohár
• [U-Boot] [PATCH 09/18 V2] CHECKPATCH: ./board/esd/plu405/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 09/18 V2] CHECKPATCH: ./board/esd/plu405/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 09/18 V2] CHECKPATCH: ./board/esd/plu405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 09/18] CHECKPATCH: ./board/esd/ar405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 1/1] ARMV7: Add support For Logic OMAP35x/DM37x modules   Peter Barada
• [U-Boot] [PATCH 1/1] ARMV7: Add support For Logic OMAP35x/DM37x modules   Tom Rini
• [U-Boot] [PATCH 1/1] ARMV7: Add support For Logic OMAP35x/DM37x modules   Peter Barada
• [U-Boot] [PATCH 1/1] ARMV7: Add support For Logic OMAP35x/DM37x modules   Igor Grinberg
• [U-Boot] [PATCH 1/2] Add a "tidy" build option   Wolfgang Denk
• [U-Boot] [PATCH 1/2] arm, arm926ejs: always do cpu critical inits   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] arm, arm926ejs: always do cpu critical inits   Heiko Schocher
• [U-Boot] [PATCH 1/2] arm, davinci: Use lldiv for the 64-bit divisions in timer.c   Christian Riesch
• [U-Boot] [PATCH 1/2] arm, davinci: Use lldiv for the 64-bit divisions in timer.c   Wolfgang Denk
• [U-Boot] [PATCH 1/2] arm/km: speed up i2c access for keymile boards   Heiko Schocher
• [U-Boot] [PATCH 1/2] arm/km: speed up i2c access for keymile boards   Holger Brunck
• [U-Boot] [PATCH 1/2] da850_am18xxevm: Call board_early_init_f() for booting without UBL   Christian Riesch
• [U-Boot] [PATCH 1/2] eXMeritus HWW-1U-1A: Add support for the AT24C128N I2C EEPROM   Kyle Moffett
• [U-Boot] [PATCH 1/2] ext4fs ls load support   uma.shankar at samsung.com
• [U-Boot] [PATCH 1/2] ext4fs ls load support   Graeme Russ
• [U-Boot] [PATCH 1/2] ext4fs ls load support   Mike Frysinger
• [U-Boot] [PATCH 1/2] Exynos: PWM: Add TCMPB3 field in pwm structure   Chander Kashyap
• [U-Boot] [PATCH 1/2] Fix warnings in arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c   Simon Glass
• [U-Boot] [PATCH 1/2] Fix warnings in arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c   Stefano Babic
• [U-Boot] [PATCH 1/2] Fix warnings in arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c   Simon Glass
• [U-Boot] [PATCH 1/2] Fix warnings in arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c   Wolfgang Denk
• [U-Boot] [PATCH 1/2] image: Implement IH_TYPE_KERNEL_NOLOAD   Stefan Roese
• [U-Boot] [PATCH 1/2] Include common.h in qsort.c to fix build warning   Simon Glass
• [U-Boot] [PATCH 1/2] Include common.h in qsort.c to fix build warning   Kumar Gala
• [U-Boot] [PATCH 1/2] Include common.h in qsort.c to fix build warning   Simon Glass
• [U-Boot] [PATCH 1/2] Include common.h in qsort.c to fix build warning   Wolfgang Denk
• [U-Boot] [PATCH 1/2] Include common.h in qsort.c to fix build warning   Heiko Schocher
• [U-Boot] [PATCH 1/2] mtd/nand:Fix wrong address read in is_blank()   Marek Vasut
• [U-Boot] [PATCH 1/2] mtd/nand:Fix wrong address read in is_blank()   Marek Vasut
• [U-Boot] [PATCH 1/2] mtd/nand:Fix wrong address read in is_blank()   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/2] mtd/nand:Fix wrong address read in is_blank()   Kushwaha Prabhakar-B32579
• [U-Boot] [PATCH 1/2] mx28evk: Remove 'all' target from Makefile   Fabio Estevam
• [U-Boot] [PATCH 1/2] mx28evk: Remove 'all' target from Makefile   Marek Vasut
• [U-Boot] [PATCH 1/2] nds32: add linkage support   Macpaul Lin
• [U-Boot] [PATCH 1/2] nds32: add linkage support   Mike Frysinger
• [U-Boot] [PATCH 1/2] nds32: add linkage support   Macpaul Lin
• [U-Boot] [PATCH 1/2] net/fm: check the old and new Fman microcode locations in NOR flash   Kumar Gala
• [U-Boot] [PATCH 1/2] net/fm: check the old and new Fman microcode locations in NOR flash   Kumar Gala
• [U-Boot] [PATCH 1/2] net/fm: check the old and new Fman microcode locations in NOR flash   Timur Tabi
• [U-Boot] [PATCH 1/2] net/fm: check the old and new Fman microcode locations in NOR flash   Timur Tabi
• [U-Boot] [PATCH 1/2] net: add Calxeda xgmac driver   Rob Herring
• [U-Boot] [PATCH 1/2] net: add Calxeda xgmac driver   Mike Frysinger
• [U-Boot] [PATCH 1/2] net: add Calxeda xgmac driver   Rob Herring
• [U-Boot] [PATCH 1/2] net: add Calxeda xgmac driver   Mike Frysinger
• [U-Boot] [PATCH 1/2] net: add Calxeda xgmac driver   Rob Herring
• [U-Boot] [PATCH 1/2] net: add Calxeda xgmac driver   Mike Frysinger
• [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Marek Vasut
• [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Mike Frysinger
• [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Marek Vasut
• [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Mike Frysinger
• [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Marek Vasut
• [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Mike Frysinger
• [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Marek Vasut
• [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Mike Frysinger
• [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors   Marek Vasut
• [U-Boot] [PATCH 1/3 RESEND] M28: Document that units has to be set to sectors on SD bootcard   Marek Vasut
• [U-Boot] [PATCH 1/3 RESEND] M28: Document that units has to be set to sectors on SD bootcard   Marek Vasut
• [U-Boot] [PATCH 1/3 RESEND] M28: Document that units has to be set to sectors on SD bootcard   Stefano Babic
• [U-Boot] [PATCH 1/3] arch/mips/lib/board.c: make (mostly) checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 1/3] arch/mips/lib/board.c: make (mostly) checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 1/3] ARM:AM33XX: Fix ddr and timer register offset   Tom Rini
• [U-Boot] [PATCH 1/3] ARM:AM33XX: Fix ddr and timer register offset   Chandan Nath
• [U-Boot] [PATCH 1/3] board/amcc/common/flash.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 1/3] board/amcc/common/flash.c: Fix GCC 4.6 build warning   Stefan Roese
• [U-Boot] [PATCH 1/3] board/amcc/common/flash.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 1/3] fs/fat: Fix FAT detection to support non-DOS partition tables   Mike Frysinger
• [U-Boot] [PATCH 1/3] fs/fat: Fix FAT detection to support non-DOS partition tables   Kyle Moffett
• [U-Boot] [PATCH 1/3] fs/fat: Fix FAT detection to support non-DOS partition tables   Moffett, Kyle D
• [U-Boot] [PATCH 1/3] i.mx: i.mx6q: Add the enet clock function   Jason Liu
• [U-Boot] [PATCH 1/3] i.mx: i.mx6q: Add the enet clock function   Stefano Babic
• [U-Boot] [PATCH 1/3] microblaze: Enable several ethernet driver compilation   Stephan Linz
• [U-Boot] [PATCH 1/3] post/lib_powerpc/multi.c: make checkpatch clean   Anatolij Gustschin
• [U-Boot] [PATCH 1/3] post/lib_powerpc/multi.c: make checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 1/3] post/lib_powerpc/multi.c: make checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 1/3] post/lib_powerpc/multi.c: make checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 1/3] ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementation   Stefan Roese
• [U-Boot] [PATCH 1/3] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Che-Liang Chiou
• [U-Boot] [PATCH 1/3] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Mike Frysinger
• [U-Boot] [PATCH 1/3] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Peter.Huewe at infineon.com
• [U-Boot] [PATCH 1/3] USB: Squash checkpatch warnings in usb_kbd.c   Wolfgang Denk
• [U-Boot] [PATCH 1/4] board/mpl/common: remove the old legacy flash   David Müller
• [U-Boot] [PATCH 1/4] fpga: add definition for Xilinx Spartan-6 XC6SLX4   Stefano Babic
• [U-Boot] [PATCH 1/4] mkenvimage: Fix some typos   Horst Kronstorfer
• [U-Boot] [PATCH 1/4] mkenvimage: Fix some typos   Wolfgang Denk
• [U-Boot] [PATCH 1/4] mmc: Change board_mmc_getcd() signature.   Thierry Reding
• [U-Boot] [PATCH 1/4] mmc: Change board_mmc_getcd() signature.   Marek Vasut
• [U-Boot] [PATCH 1/4] mmc: Change board_mmc_getcd() signature.   Thierry Reding
• [U-Boot] [PATCH 1/4] mmc: Change board_mmc_getcd() signature.   Stefano Babic
• [U-Boot] [PATCH 1/4] mmc: Change board_mmc_getcd() signature.   Stefano Babic
• [U-Boot] [PATCH 1/4] mmc: Change board_mmc_getcd() signature.   Marek Vasut
• [U-Boot] [PATCH 1/4] mmc: Change board_mmc_getcd() signature.   Thierry Reding
• [U-Boot] [PATCH 1/4] mtd/nand : Add function board_nand_init_tail() for some special NAND controllers   Shengzhou Liu
• [U-Boot] [PATCH 1/4] mtd/nand : Add function board_nand_init_tail() for some special NAND controllers   Igor Grinberg
• [U-Boot] [PATCH 1/4] powerpc/83xx/km: update SDRAM parameters for km8321 boards   Heiko Schocher
• [U-Boot] [PATCH 1/4] powerpc/83xx/km: update SDRAM parameters for km8321 boards   Holger Brunck
• [U-Boot] [PATCH 1/4] USB: ULPI: switch argument type from u8 to unsigned   Igor Grinberg
• [U-Boot] [PATCH 1/4] USB: ULPI: switch argument type from u8 to unsigned   Simon Glass
• [U-Boot] [PATCH 1/4] x86: Import code from coreboot's libpayload to parse the coreboot table   Graeme Russ
• [U-Boot] [PATCH 1/5 v2] mtd/nand: Add function board_nand_init_tail() for some special NAND controllers   Shengzhou Liu
• [U-Boot] [PATCH 1/5] mtd/nand: Add function board_nand_init_tail() for some special NAND controllers   Marek Vasut
• [U-Boot] [PATCH 1/5] mtd/nand: Add function board_nand_init_tail() for some special NAND controllers   Shengzhou Liu
• [U-Boot] [PATCH 1/6] Exynos: Add CONFIG_EXYNOS4 Macro to EXYNOS4 based boards   Chander Kashyap
• [U-Boot] [PATCH 1/6] Exynos: Add CONFIG_EXYNOS4 Macro to EXYNOS4 based boards   Minkyu Kang
• [U-Boot] [PATCH 1/6] Exynos: Add CONFIG_EXYNOS4 Macro to EXYNOS4 based boards   Chander Kashyap
• [U-Boot] [PATCH 1/6] omap4: usb: Add omap-ehci support   Govindraj.R
• [U-Boot] [PATCH 1/6] omap4: usb: Add omap-ehci support   Govindraj.R
• [U-Boot] [PATCH 1/6] omap4: usb: Add omap-ehci support   Chris Lalancette
• [U-Boot] [PATCH 1/6] omap4: usb: Add omap-ehci support   Govindraj
• [U-Boot] [PATCH 1/6] omap4: usb: Add omap-ehci support   Tom Rini
• [U-Boot] [PATCH 1/6] omap4: usb: Add omap-ehci support   Govindraj
• [U-Boot] [PATCH 1/6] tegra: fdt: Add keyboard controller definition   Simon Glass
• [U-Boot] [PATCH 1/7] CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.c   Marek Vasut
• [U-Boot] [PATCH 1/7] CHECKPATCH: ./board/esd/voh405/logo_640_480_24bpp.c   Wolfgang Denk
• [U-Boot] [PATCH 1/7] tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE   Marek Vasut
• [U-Boot] [PATCH 1/7] tegra: Rename NV_PA_PMC_BASE to TEGRA2_PMC_BASE   Simon Glass
• [U-Boot] [PATCH 1/8] OMAP3: Correct SYSBOOT_MASK   Tom Rini
• [U-Boot] [PATCH 1/9] common/menu.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH 1/9] common/menu.c: Fix build warning   Heiko Schocher
• [U-Boot] [PATCH 1/9] common/menu.c: Fix build warning   Marek Vasut
• [U-Boot] [PATCH 1/9] common/menu.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH 1/9] common/menu.c: Fix build warning   Wolfgang Denk
• [U-Boot] [PATCH 1/9] MPC7xx: remove obsolete "BAB7xx" board   Wolfgang Denk
• [U-Boot] [PATCH 1/9] MPC7xx: remove obsolete "BAB7xx" board   Wolfgang Denk
• [U-Boot] [PATCH 1/9] USB: MX5: add helper functions to enable USB clocks   Marek Vasut
• [U-Boot] [PATCH 10/10] Convert cmd_usage() calls in common to use a return value   Simon Glass
• [U-Boot] [PATCH 10/10] Convert cmd_usage() calls in common to use a return value   Igor Grinberg
• [U-Boot] [PATCH 10/10] Convert cmd_usage() calls in common to use a return value   Simon Glass
• [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 10/13] board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings   Tom Rini
• [U-Boot] [PATCH 10/14] board/mpl/common/flash.c: Fix GCC 4.6 build warning   Marek Vasut
• [U-Boot] [PATCH 10/14] board/mpl/common/flash.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 10/14] board/mpl/common/flash.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 10/14] tegra: Setup PMC scratch info from ap20 setup   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Stephen Warren
• [U-Boot] [PATCH 10/14] tegra: usb: Add support for USB peripheral   Simon Glass
• [U-Boot] [PATCH 10/15] New command clear: Clear the ANSI terminal   Pali Rohár
• [U-Boot] [PATCH 10/16] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes   Mike Frysinger
• [U-Boot] [PATCH 10/16] drivers/video/cfb_console.c: Add support for some ANSI terminal escape codes   Pali Rohár
• [U-Boot] [PATCH 10/18 V2] CHECKPATCH: ./board/esd/ar405/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 10/18 V2] CHECKPATCH: ./board/esd/ar405/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 10/18 V2] CHECKPATCH: ./board/esd/ar405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 10/18] CHECKPATCH: ./board/esd/plu405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 11/11] MIPS: MAKEALL: fix lists for MIPSel and MIPS boards   Wolfgang Denk
• [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg   Tom Rini
• [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg   Wolfgang Denk
• [U-Boot] [PATCH 11/13] ARM: convert "omap16xx" boards to boards.cfg   Wolfgang Denk
• [U-Boot] [PATCH 11/13] nand_spl_simple: store temp data at CONFIG_SPL_NAND_WORKSPACE   Stefano Babic
• [U-Boot] [PATCH 11/13] nand_spl_simple: store temp data at CONFIG_SPL_NAND_WORKSPACE   Ilya Yanok
• [U-Boot] [PATCH 11/13] nand_spl_simple: store temp data at CONFIG_SPL_NAND_WORKSPACE   Scott Wood
• [U-Boot] [PATCH 11/13] nand_spl_simple: store temp data at CONFIG_SPL_NAND_WORKSPACE   Wolfgang Denk
• [U-Boot] [PATCH 11/13] nand_spl_simple: store temp data at CONFIG_SPL_NAND_WORKSPACE   Ilya Yanok
• [U-Boot] [PATCH 11/13] nand_spl_simple: store temp data at CONFIG_SPL_NAND_WORKSPACE   Stefano Babic
• [U-Boot] [PATCH 11/14] board/freescale/mpc8610hpcd/mpc8610hpcd.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 11/14] tegra: Set up warmboot code on Nvidia boards   Simon Glass
• [U-Boot] [PATCH 11/15] New config variable CONFIG_MENUCMD   Pali Rohár
• [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal   Pali Rohár
• [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal   Mike Frysinger
• [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal   Pali Rohár
• [U-Boot] [PATCH 11/16] New command clr: Clear the ANSI terminal   Mike Frysinger
• [U-Boot] [PATCH 11/18 V2] CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c   Marek Vasut
• [U-Boot] [PATCH 11/18 V2] CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c   Anatolij Gustschin
• [U-Boot] [PATCH 11/18 V2] CHECKPATCH: ./board/esd/ar405/fpgadata_xl30.c   Wolfgang Denk
• [U-Boot] [PATCH 11/18] CHECKPATCH: ./board/esd/wuh405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 12/13] board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings   Tom Rini
• [U-Boot] [PATCH 12/14] arch/powerpc/cpu/mpc86xx/cpu.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 12/14] tegra: Set vdd_core and vdd_cpu to high   Simon Glass
• [U-Boot] [PATCH 12/15] New config variable CONFIG_PREMONITOR   Pali Rohár
• [U-Boot] [PATCH 12/16] New config variable CONFIG_MENUCMD   Pali Rohár
• [U-Boot] [PATCH 12/18 V2] CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 12/18 V2] CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 12/18 V2] CHECKPATCH: ./board/esd/dasa_sim/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 12/18] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405.c   Marek Vasut
• [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg   Tom Rini
• [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg   Wolfgang Denk
• [U-Boot] [PATCH 13/13] ARM: convert "omap730p2" boards to boards.cfg   Wolfgang Denk
• [U-Boot] [PATCH 13/13] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH 13/13] mcx: support for HTKW mcx board   Tom Rini
• [U-Boot] [PATCH 13/13] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH 13/13] mcx: support for HTKW mcx board   Tom Rini
• [U-Boot] [PATCH 13/14] board/sbc405/strataflash.c: Fix GCC 4.6 build warning   Marek Vasut
• [U-Boot] [PATCH 13/14] board/sbc405/strataflash.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 13/14] tegra: Add EMC settings for Seaboard, Harmony   Simon Glass
• [U-Boot] [PATCH 13/15] New board support: Nokia RX-51 aka N900   Pali Rohár
• [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR   Pali Rohár
• [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR   Mike Frysinger
• [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR   Pali Rohár
• [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR   Mike Frysinger
• [U-Boot] [PATCH 13/16] New config variable CONFIG_PREMONITOR   Pali Rohár
• [U-Boot] [PATCH 13/18 V2] CHECKPATCH: ./board/esd/ash405/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 13/18 V2] CHECKPATCH: ./board/esd/ash405/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 13/18 V2] CHECKPATCH: ./board/esd/ash405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 13/18] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci405ab.c   Marek Vasut
• [U-Boot] [PATCH 14/14] board/emk/top860/top860.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 14/14] tegra: Enable LP0 on Seaboard   Simon Glass
• [U-Boot] [PATCH 14/15] New command bootmenu: ANSI terminal Boot Menu support   Pali Rohár
• [U-Boot] [PATCH 14/16] New board support: Nokia RX-51 aka N900   Pali Rohár
• [U-Boot] [PATCH 14/16] New board support: Nokia RX-51 aka N900   Mike Frysinger
• [U-Boot] [PATCH 14/18 V2] CHECKPATCH: ./board/esd/voh405/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 14/18 V2] CHECKPATCH: ./board/esd/voh405/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 14/18 V2] CHECKPATCH: ./board/esd/voh405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 14/18] CHECKPATCH: ./board/esd/cpci405/fpgadata_cpci4052.c   Marek Vasut
• [U-Boot] [PATCH 15/15] RX-51: Add support for bootmenu   Pali Rohár
• [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support   Pali Rohár
• [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support   Mike Frysinger
• [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support   Pali Rohár
• [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support   Mike Frysinger
• [U-Boot] [PATCH 15/16] New command bootmenu: ANSI terminal Boot Menu support   Pali Rohár
• [U-Boot] [PATCH 15/18 V2] CHECKPATCH: ./board/esd/apc405/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 15/18 V2] CHECKPATCH: ./board/esd/apc405/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 15/18 V2] CHECKPATCH: ./board/esd/apc405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 15/18] CHECKPATCH: ./board/esd/canbt/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 16/16] RX-51: Add support for bootmenu   Pali Rohár
• [U-Boot] [PATCH 16/18 V2] CHECKPATCH: ./board/esd/tasreg/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 16/18 V2] CHECKPATCH: ./board/esd/tasreg/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 16/18 V2] CHECKPATCH: ./board/esd/tasreg/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 16/18] CHECKPATCH: ./board/esd/du405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 17/18 V2] CHECKPATCH: ./board/esd/pci405/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 17/18 V2] CHECKPATCH: ./board/esd/pci405/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 17/18 V2] CHECKPATCH: ./board/esd/pci405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 17/18] CHECKPATCH: ./board/esd/cpciiser4/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 18/18 V2] CHECKPATCH: ./board/esd/hh405/fpgadata.c   Anatolij Gustschin
• [U-Boot] [PATCH 18/18 V2] CHECKPATCH: ./board/esd/hh405/fpgadata.c   Wolfgang Denk
• [U-Boot] [PATCH 18/18 V2] CHECKPATCH: ./board/esd/hh405/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 18/18] CHECKPATCH: ./board/dave/PPChameleonEVB/fpgadata.c   Marek Vasut
• [U-Boot] [PATCH 2/2 v2] Allow for parallel builds and saved output   Kumar Gala
• [U-Boot] [PATCH 2/2] arm/km: checkpatch cleanup   Holger Brunck
• [U-Boot] [PATCH 2/2] arm/km: checkpatch cleanup   Heiko Schocher
• [U-Boot] [PATCH 2/2] ARM: highbank: enable networking and pxe   Rob Herring
• [U-Boot] [PATCH 2/2] ARM: highbank: enable networking and pxe   Mike Frysinger
• [U-Boot] [PATCH 2/2] ARM: highbank: enable networking and pxe   Rob Herring
• [U-Boot] [PATCH 2/2] ARM: highbank: enable networking and pxe   Mike Frysinger
• [U-Boot] [PATCH 2/2] da850_am18xxevm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH 2/2] eXMeritus HWW-1U-1A: Minor environment variable tweaks   Kyle Moffett
• [PATCH 2/2] ext4fs write support   Uma Shankar
• [U-Boot] [PATCH 2/2] ext4fs write support   uma.shankar at samsung.com
• [U-Boot] [PATCH 2/2] ext4fs write support   Kim Phillips
• [U-Boot] [PATCH 2/2] ext4fs write support   Mike Frysinger
• [U-Boot] [PATCH 2/2] Exynos: Fix ARM Clock frequency calculation   Chander Kashyap
• [U-Boot] [PATCH 2/2] Exynos: Fix ARM Clock frequency calculation   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Exynos: Fix ARM Clock frequency calculation   Chander Kashyap
• [U-Boot] [PATCH 2/2] Exynos: Fix ARM Clock frequency calculation   Minkyu Kang
• [U-Boot] [PATCH 2/2] Exynos: Fix ARM Clock frequency calculation   Chander Kashyap
• [U-Boot] [PATCH 2/2] Exynos: Fix ARM Clock frequency calculation   Chander Kashyap
• [U-Boot] [PATCH 2/2] Exynos: Fix ARM Clock frequency calculation   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Exynos: Fix ARM Clock frequency calculation   Chander Kashyap
• [U-Boot] [PATCH 2/2] Fix unused function in cmd_bdinfo.c   Simon Glass
• [U-Boot] [PATCH 2/2] Fix unused function in cmd_bdinfo.c   Wolfgang Denk
• [U-Boot] [PATCH 2/2] image: Don't detect XIP images as overlapping.   Stefan Roese
• [U-Boot] [PATCH 2/2] m28evk: Remove 'all' target from Makefile   Fabio Estevam
• [U-Boot] [PATCH 2/2] m28evk: Remove 'all' target from Makefile   Marek Vasut
• [U-Boot] [PATCH 2/2] mtd/nand: Fix IFC driver to support 2K NAND page   Marek Vasut
• [U-Boot] [PATCH 2/2] mtd/nand: Fix IFC driver to support 2K NAND page   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/2] mtd/nand: Fix IFC driver to support 2K NAND page   Kushwaha Prabhakar-B32579
• [U-Boot] [PATCH 2/2] NET: NE2000: Hide dp83902a_priv_data_t into ne2k_private_data   Marek Vasut
• [U-Boot] [PATCH 2/2] post/post.c: Use lldiv for 64-bit divisions   Christian Riesch
• [U-Boot] [PATCH 2/2] post/post.c: Use lldiv for 64-bit divisions   Wolfgang Denk
• [U-Boot] [PATCH 2/2] powerpc/85xx: move the Fman microcode from ef000000 to eff40000   Timur Tabi
• [U-Boot] [PATCH 2/3] arch/mips/lib/board.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 2/3] arch/mips/lib/board.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 2/3] ARM:AM33XX: Add mmc/sd support   Chandan Nath
• [U-Boot] [PATCH 2/3] ARM:AM33XX: Add mmc/sd support   Tom Rini
• [U-Boot] [PATCH 2/3] board/amcc/yucca/flash.c: Fix GCC 4.6 build warnings   Stefan Roese
• [U-Boot] [PATCH 2/3] board/amcc/yucca/flash.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 2/3] fec: add the i.mx6q enet driver support   Jason Liu
• [U-Boot] [PATCH 2/3] fec: add the i.mx6q enet driver support   Stefano Babic
• [U-Boot] [PATCH 2/3] fs/fat: Improve error handling   Kyle Moffett
• [U-Boot] [PATCH 2/3] M28: Fix typo   Marek Vasut
• [U-Boot] [PATCH 2/3] M28: Fix typo   Stefano Babic
• [U-Boot] [PATCH 2/3] microblaze: Enable phylib and mii support   Stephan Linz
• [U-Boot] [PATCH 2/3] post/lib_powerpc/multi.c: code cleanup   Wolfgang Denk
• [U-Boot] [PATCH 2/3] post/lib_powerpc/multi.c: code cleanup   Anatolij Gustschin
• [U-Boot] [PATCH 2/3] post/lib_powerpc/multi.c: code cleanup   Wolfgang Denk
• [U-Boot] [PATCH 2/3] ppc4xx: remove invalid access to PCI_BRDGOPT2 register   Stefan Roese
• [U-Boot] [PATCH 2/3] tpm: Add i2c TPM driver   Che-Liang Chiou
• [U-Boot] [PATCH 2/3] tpm: Add i2c TPM driver   Mike Frysinger
• [U-Boot] [PATCH 2/3] tpm: Add i2c TPM driver   Peter.Huewe at infineon.com
• [U-Boot] [PATCH 2/4] board/mpl/pip405: use the CFI driver for the PIP405 board   David Müller
• [U-Boot] [PATCH 2/4] FPGA: use debug() instead of module debug printf   Stefano Babic
• [U-Boot] [PATCH 2/4] mkenvimage: Fix getopt() error handling   Horst Kronstorfer
• [U-Boot] [PATCH 2/4] mkenvimage: Fix getopt() error handling   Wolfgang Denk
• [U-Boot] [PATCH 2/4] mmc: Implement card detection.   Thierry Reding
• [U-Boot] [PATCH 2/4] mtd/nand: Fixup for support ONFI detect   Shengzhou Liu
• [U-Boot] [PATCH 2/4] mtd/nand: Fixup for support ONFI detect   Scott Wood
• [U-Boot] [PATCH 2/4] mtd/nand: Fixup for support ONFI detect   Scott Wood
• [U-Boot] [PATCH 2/4] net: tweak eth_device layout to simplify enetaddr use   Wolfgang Denk
• [U-Boot] [PATCH 2/4] powerpc/83xx/km: remove obsolete defines for tuda1   Heiko Schocher
• [U-Boot] [PATCH 2/4] powerpc/83xx/km: remove obsolete defines for tuda1   Holger Brunck
• [U-Boot] [PATCH 2/4] USB: ULPI: clean a mixup of return types   Igor Grinberg
• [U-Boot] [PATCH 2/4] USB: ULPI: clean a mixup of return types   Simon Glass
• [U-Boot] [PATCH 2/4] USB: ULPI: clean a mixup of return types   Remy Bohmer
• [U-Boot] [PATCH 2/5 v2] mtd/nand: Fixup for support ONFI detect   Shengzhou Liu
• [U-Boot] [PATCH 2/5] mtd/nand: Fixup for support ONFI detect   Shengzhou Liu
• [PATCH 2/6] ehci-omap: Clean up added ehci-omap.c   Govindraj.R
• [U-Boot] [PATCH 2/6] Exynos: Clock.c: Use CONFIG_SYS_CLK_FREQ macro   Chander Kashyap
• [U-Boot] [PATCH 2/6] OMAP4: clock-common: Move the usb dppl configuration to new func.   Govindraj.R
• [U-Boot] [PATCH 2/6] OMAP4: clock-common: Move the usb dppl configuration to new func.   Govindraj.R
• [U-Boot] [PATCH 2/6] tegra: fdt: Add keyboard definitions for Seaboard   Simon Glass
• [U-Boot] [PATCH 2/6] tegra: fdt: Add keyboard definitions for Seaboard   Stephen Warren
• [U-Boot] [PATCH 2/7] CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.c   Marek Vasut
• [U-Boot] [PATCH 2/7] CHECKPATCH: ./board/esd/voh405/logo_320_240_4bpp.c   Wolfgang Denk
• [U-Boot] [PATCH 2/7] tegra: fdt: Add extra I2C definitions for U-Boot   Simon Glass
• [U-Boot] [PATCH 2/7] tegra: fdt: Add extra I2C definitions for U-Boot   Marek Vasut
• [U-Boot] [PATCH 2/7] tegra: fdt: Add extra I2C definitions for U-Boot   Stephen Warren
• [U-Boot] [PATCH 2/7] tegra: fdt: Add extra I2C definitions for U-Boot   Simon Glass
• [U-Boot] [PATCH 2/7] tegra: fdt: Add extra I2C definitions for U-Boot   Stephen Warren
• [U-Boot] [PATCH 2/7] tegra: fdt: Add extra I2C definitions for U-Boot   Simon Glass
• [U-Boot] [PATCH 2/8] OMAP3: Drop extra delay in gpmc_init   Tom Rini
• [U-Boot] [PATCH 2/9] drivers/mtd/nand/nand_spl_simple.c: Fix GCC 4.6 warnings   Marek Vasut
• [U-Boot] [PATCH 2/9] drivers/mtd/nand/nand_spl_simple.c: Fix GCC 4.6 warnings   Anatolij Gustschin
• [U-Boot] [PATCH 2/9] drivers/mtd/nand/nand_spl_simple.c: Fix GCC 4.6 warnings   Heiko Schocher
• [U-Boot] [PATCH 2/9] drivers/mtd/nand/nand_spl_simple.c: Fix GCC 4.6 warnings   Scott Wood
• [U-Boot] [PATCH 2/9] MPC8240: remove obsolete "OXC" board   Wolfgang Denk
• [U-Boot] [PATCH 2/9] MPC8240: remove obsolete "OXC" board   Wolfgang Denk
• [U-Boot] [PATCH 2/9] USB: MX5: add generic USB EHCI support for mx51 and mx53   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Chandan Nath
• [U-Boot] [PATCH 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Tom Rini
• [U-Boot] [PATCH 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Aneesh V
• [U-Boot] [PATCH 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Tom Rini
• [U-Boot] [PATCH 3/3] board/amcc/taihu/flash.c: Fix GCC 4.6 build warnings   Stefan Roese
• [U-Boot] [PATCH 3/3] board/amcc/taihu/flash.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH 3/3] drivers/net/inca-ip_sw.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 3/3] drivers/net/inca-ip_sw.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 3/3] i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28   Stefano Babic
• [U-Boot] [PATCH 3/3] i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28   Fabio Estevam
• [U-Boot] [PATCH 3/3] i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28   Marek Vasut
• [U-Boot] [PATCH 3/3] i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28   Marek Vasut
• [U-Boot] [PATCH 3/3] i.mx6q: arm2: Add the enet function support   Jason Liu
• [U-Boot] [PATCH 3/3] i.mx6q: arm2: Add the enet function support   Stefano Babic
• [U-Boot] [PATCH 3/3] i.mx6q: arm2: Add the enet function support   Liu Hui-R64343
• [U-Boot] [PATCH 3/3] microblaze: Wire up LL_TEMAC driver initialization   Stephan Linz
• [U-Boot] [PATCH 3/3] post/lib_powerpc/multi.c: fix stack overflow error   Anatolij Gustschin
• [U-Boot] [PATCH 3/3] post/lib_powerpc/multi.c: fix stack overflow error   Wolfgang Denk
• [U-Boot] [PATCH 3/3] post/lib_powerpc/multi.c: fix stack overflow error   Wolfgang Denk
• [U-Boot] [PATCH 3/3] post/lib_powerpc/multi.c: fix stack overflow error   Wolfgang Denk
• [U-Boot] [PATCH 3/3] tpm: Update README   Che-Liang Chiou
• [U-Boot] [PATCH 3/3] tpm: Update README   Mike Frysinger
• [U-Boot] [PATCH 3/3] tpm: Update README   Peter.Huewe at infineon.com
• [U-Boot] [PATCH 3/3] usb_storage: Fix EHCI "out of buffer pointers" with CD-ROM   Mike Frysinger
• [U-Boot] [PATCH 3/3] usb_storage: Fix EHCI "out of buffer pointers" with CD-ROM   Mike Frysinger
• [U-Boot] [PATCH 3/3] usb_storage: Fix EHCI "out of buffer pointers" with CD-ROM   Kyle Moffett
• [U-Boot] [PATCH 3/3] usb_storage: Fix EHCI "out of buffer pointers" with CD-ROM   Moffett, Kyle D
• [U-Boot] [PATCH 3/4] board/mpl/mip405: use the CFI driver for the MIP405/MIP405T board   David Müller
• [U-Boot] [PATCH 3/4] fpga: Spartan-3: let print the progress if configured   Stefano Babic
• [U-Boot] [PATCH 3/4] mkenvimage: Print program basename instead of whole path in usage()   Wolfgang Denk
• [U-Boot] [PATCH 3/4] mkenvimage: Print program basename instead of whole path in usage()   Wolfgang Denk
• [U-Boot] [PATCH 3/4] mkenvimage: Print program basename instead of whole path in usage()   Horst Kronstorfer
• [U-Boot] [PATCH 3/4] mmc: fsl_esdhc: Implement card-detect hook.   Thierry Reding
• [U-Boot] [PATCH 3/4] mmc: fsl_esdhc: Implement card-detect hook.   Stefano Babic
• [U-Boot] [PATCH 3/4] mmc: fsl_esdhc: Implement card-detect hook.   Thierry Reding
• [U-Boot] [PATCH 3/4] mtd/nand: remove CONFIG_SYS_NAND_ONFI_DETECTION to enable ONFI detection   Shengzhou Liu
• [U-Boot] [PATCH 3/4] powerpc/83xx/km: merge tuxa and tuda1 boards to tuxx1   Heiko Schocher
• [U-Boot] [PATCH 3/4] powerpc/83xx/km: merge tuxa and tuda1 boards to tuxx1   Holger Brunck
• [U-Boot] [PATCH 3/4] USB: ULPI: increase error case verbosity   Igor Grinberg
• [U-Boot] [PATCH 3/4] USB: ULPI: increase error case verbosity   Simon Glass
• [U-Boot] [PATCH 3/4] USB: ULPI: increase error case verbosity   Remy Bohmer
• [U-Boot] [PATCH 3/4] x86: Force the lib_sysinfo structure to be in the .data section   Graeme Russ
• [U-Boot] [PATCH 3/4] x86: Force the lib_sysinfo structure to be in the .data section   Gabe Black
• [U-Boot] [PATCH 3/4] x86: Force the lib_sysinfo structure to be in the .data section   Graeme Russ
• [U-Boot] [PATCH 3/4] x86: Force the lib_sysinfo structure to be in the .data section   Gabe Black
• [U-Boot] [PATCH 3/4] x86: Refactor the zboot innards so they can be reused with a vboot image   Graeme Russ
• [U-Boot] [PATCH 3/4] x86: Refactor the zboot innards so they can be reused with a vboot image   Gabe Black
• [U-Boot] [PATCH 3/5 v2] mtd/nand: remove CONFIG_SYS_NAND_ONFI_DETECTION to enable ONFI detection   Shengzhou Liu
• [U-Boot] [PATCH 3/5 v2] mtd/nand: remove CONFIG_SYS_NAND_ONFI_DETECTION to enable ONFI detection   Scott Wood
• [U-Boot] [PATCH 3/5 v2] mtd/nand: remove CONFIG_SYS_NAND_ONFI_DETECTION to enable ONFI detection   Scott Wood
• [U-Boot] [PATCH 3/5] mtd/nand: remove CONFIG_SYS_NAND_ONFI_DETECTION to enable ONFI detection   Shengzhou Liu
• [U-Boot] [PATCH 3/6] Exynos: Clock.c: Replace exynos4 prefix with exynos   Chander Kashyap
• [U-Boot] [PATCH 3/6] fdt: Add fdtdec functions to read byte array   Stephen Warren
• [U-Boot] [PATCH 3/6] fdt: Add fdtdec functions to read byte array   Simon Glass
• [U-Boot] [PATCH 3/6] fdt: Add fdtdec functions to read byte array   Simon Glass
• [U-Boot] [PATCH 3/6] OMAP4: Panda_mux: configure usb port1 for ulpi phy mode   Govindraj.R
• [U-Boot] [PATCH 3/6] OMAP4: Panda_mux: configure usb port1 for ulpi phy mode   Govindraj.R
• [U-Boot] [PATCH 3/7] CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.c   Marek Vasut
• [U-Boot] [PATCH 3/7] CHECKPATCH: ./board/esd/apc405/logo_640_480_24bpp.c   Wolfgang Denk
• [U-Boot] [PATCH 3/7] tegra: Add I2C support to funcmux   Simon Glass
• [U-Boot] [PATCH 3/8] AM3517: Add NOR Flash boot mode Support   Tom Rini
• [U-Boot] [PATCH 3/8] AM3517: Add NOR Flash boot mode Support   Igor Grinberg
• [U-Boot] [PATCH 3/8] AM3517: Add NOR Flash boot mode Support   Tom Rini
• [U-Boot] [PATCH 3/8] AM3517: Add NOR Flash boot mode Support   Hiremath, Vaibhav
• [U-Boot] [PATCH 3/8] AM3517: Add NOR Flash boot mode Support   Igor Grinberg
• [U-Boot] [PATCH 3/8] AM3517: Add NOR Flash boot mode Support   Igor Grinberg
• [U-Boot] [PATCH 3/8] AM3517: Add NOR Flash boot mode Support   Tom Rini
• [U-Boot] [PATCH 3/8] AM3517: Add NOR Flash boot mode Support   Igor Grinberg
• [U-Boot] [PATCH 3/8] AM3517: Add NOR Flash boot mode Support   Hiremath, Vaibhav
• [U-Boot] [PATCH 3/9] drivers/mtd/nand/nand_spl_load.c: Fix GCC 4.6 warning   Heiko Schocher
• [U-Boot] [PATCH 3/9] drivers/mtd/nand/nand_spl_load.c: Fix GCC 4.6 warning   Marek Vasut
• [U-Boot] [PATCH 3/9] drivers/mtd/nand/nand_spl_load.c: Fix GCC 4.6 warning   Scott Wood
• [U-Boot] [PATCH 3/9] drivers/mtd/nand/nand_spl_load.c: Fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH 3/9] MPC850: remove obsolete "rmu" Board   Wolfgang Denk
• [U-Boot] [PATCH 3/9] MPC850: remove obsolete "rmu" Board   Wolfgang Denk
• [U-Boot] [PATCH 3/9] USB: MX5: Abstract out mx51 USB pixmux configuration   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux   Stefano Babic
• [U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux   Igor Grinberg
• [U-Boot] [PATCH 4/4] ARM: omap3: Added Teejet mt_ventoux   Stefano Babic
• [U-Boot] [PATCH 4/4] board/mpl/pati: use the CFI driver for the PATI board   David Müller
• [U-Boot] [PATCH 4/4] mkenvimage: Add version info switch (-V)   Horst Kronstorfer
• [U-Boot] [PATCH 4/4] mkenvimage: Add version info switch (-V)   Wolfgang Denk
• [U-Boot] [PATCH 4/4] mmc: tegra2: Implement card-detect hook.   Thierry Reding
• [U-Boot] [PATCH 4/4] mtd/nand: Add ONFI support for FSL NAND controller   Shengzhou Liu
• [U-Boot] [PATCH 4/4] mtd/nand: Add ONFI support for FSL NAND controller   Scott Wood
• [U-Boot] [PATCH 4/4] mtd/nand: Add ONFI support for FSL NAND controller   Scott Wood
• [U-Boot] [PATCH 4/4] powerpc/83xx/km: add support for 8321 based tuge1 board   Heiko Schocher
• [U-Boot] [PATCH 4/4] powerpc/83xx/km: add support for 8321 based tuge1 board   Holger Brunck
• [U-Boot] [PATCH 4/4] README: add documentation for CONFIG_USB_ULPI*   Simon Glass
• [U-Boot] [PATCH 4/4] README: add documentation for CONFIG_USB_ULPI*   Igor Grinberg
• [U-Boot] [PATCH 4/4] README: add documentation for CONFIG_USB_ULPI*   Simon Glass
• [U-Boot] [PATCH 4/4] README: add documentation for CONFIG_USB_ULPI*   Igor Grinberg
• [U-Boot] [PATCH 4/4] README: add documentation for CONFIG_USB_ULPI*   Remy Bohmer
• [U-Boot] [PATCH 4/4] README: add documentation for CONFIG_USB_ULPI*   Simon Glass
• [U-Boot] [PATCH 4/4] README: add documentation for CONFIG_USB_ULPI*   Remy Bohmer
• [U-Boot] [PATCH 4/4] README: add documentation for CONFIG_USB_ULPI*   Igor Grinberg
• [U-Boot] [PATCH 4/4] x86: Add infrastructure to extract an e820 table from the coreboot tables   Graeme Russ
• [U-Boot] [PATCH 4/4] x86: Add infrastructure to extract an e820 table from the coreboot tables   Gabe Black
• [U-Boot] [PATCH 4/4] x86: Add infrastructure to extract an e820 table from the coreboot tables   Graeme Russ
• [U-Boot] [PATCH 4/4] x86: Add support for specifying an initrd with the zboot command   Graeme Russ
• [U-Boot] [PATCH 4/5 v2] mtd/nand: Add ONFI support for FSL NAND controller   Shengzhou Liu
• [U-Boot] [PATCH 4/5] mtd/nand: Add ONFI support for FSL NAND controller   Shengzhou Liu
• [U-Boot] [PATCH 4/5] mtd/nand: Add ONFI support for FSL NAND controller   Scott Wood
• [U-Boot] [PATCH 4/5] usbtty: init endpoints prior to startup events   Stefan Herbrechtsmeier
• [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Minkyu Kang
• [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Chander Kashyap
• [U-Boot] [PATCH 4/6] OMAP4: clocks: enable usb host clocks by default.   Govindraj.R
• [U-Boot] [PATCH 4/6] OMAP4: clocks: enable usb host clocks by default.   Govindraj.R
• [U-Boot] [PATCH 4/6] tegra: Add tegra keyboard support   Simon Glass
• [U-Boot] [PATCH 4/6] tegra: Add tegra keyboard support   Stephen Warren
• [U-Boot] [PATCH 4/6] tegra: Add tegra keyboard support   Simon Glass
• [U-Boot] [PATCH 4/6] tegra: Add tegra keyboard support   Stephen Warren
• [U-Boot] [PATCH 4/6] tegra: Add tegra keyboard support   Simon Glass
• [U-Boot] [PATCH 4/6] tegra: Add tegra keyboard support   Stephen Warren
• [U-Boot] [PATCH 4/6] tegra: Add tegra keyboard support   Simon Glass
• [U-Boot] [PATCH 4/7] CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.c   Marek Vasut
• [U-Boot] [PATCH 4/7] CHECKPATCH: ./board/esd/hh405/logo_640_480_24bpp.c   Wolfgang Denk
• [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Simon Glass
• [U-Boot] [PATCH 4/7] tegra: Add I2C driver   Marek Vasut
• [U-Boot] [PATCH 4/8] AM3517 EVM: Add uEnv.txt to the default bootcmd   Tom Rini
• [U-Boot] [PATCH 4/9] board/w7o/fpga.c: make (mostly) checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 4/9] board/w7o/fpga.c: make (mostly) checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 4/9] drivers/usb/musb/musb_udc.c: Fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH 4/9] drivers/usb/musb/musb_udc.c: Fix GCC 4.6 warning   Remy Bohmer
• [U-Boot] [PATCH 4/9] drivers/usb/musb/musb_udc.c: Fix GCC 4.6 warning   Marek Vasut
• [U-Boot] [PATCH 4/9] drivers/usb/musb/musb_udc.c: Fix GCC 4.6 warning   Wolfgang Denk
• [U-Boot] [PATCH 4/9] USB: MX5: Add MX5 usb post-init callback   Marek Vasut
• [U-Boot] [PATCH 5/5 v2] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   Shengzhou Liu
• [U-Boot] [PATCH 5/5 v2] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   Scott Wood
• [U-Boot] [PATCH 5/5 v2] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   Scott Wood
• [U-Boot] [PATCH 5/5 v2] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   Scott Wood
• [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   Shengzhou Liu
• [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   Marek Vasut
• [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   Marek Vasut
• [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   Marek Vasut
• [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   Marek Vasut
• [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   LiuShuo
• [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   LiuShuo
• [U-Boot] [PATCH 5/5] mtd/nand: workaround for Freescale FCM to support 4k pagesize Nand chip   LiuShuo
• [U-Boot] [PATCH 5/6] EXYNOS: SMDK5250: Add MMC SPL support   Chander Kashyap
• [U-Boot] [PATCH 5/6] OMAP4: Panda: Add hcd init and enable ehci support.   Govindraj.R
• [U-Boot] [PATCH 5/6] OMAP4: Panda: Add hcd init and enable ehci support.   Govindraj.R
• [U-Boot] [PATCH 5/6] tegra: Switch on console mux and use environment for console   Simon Glass
• [U-Boot] [PATCH 5/7] CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.c   Marek Vasut
• [U-Boot] [PATCH 5/7] CHECKPATCH: ./board/esd/hh405/logo_320_240_4bpp.c   Wolfgang Denk
• [U-Boot] [PATCH 5/7] tegra: Initialise I2C on Nvidia boards   Simon Glass
• [U-Boot] [PATCH 5/8] AM3517 EVM: Add am3517_evm_norflash and _norflash_boot targets   Tom Rini
• [U-Boot] [PATCH 5/9] ARM: sbc35_a9g20: re-add MACH_TYPE_SBC35_A9G20   Albert ARIBAUD
• [U-Boot] [PATCH 5/9] board/w7o/fpga.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 5/9] board/w7o/fpga.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH 5/9] drivers/usb/gadget/core.c: Fix GCC 4.6 warning   Remy Bohmer
• [U-Boot] [PATCH 5/9] drivers/usb/gadget/core.c: Fix GCC 4.6 warning   Marek Vasut
• [U-Boot] [PATCH 5/9] drivers/usb/gadget/core.c: Fix GCC 4.6 warning   Wolfgang Denk
• [U-Boot] [PATCH 5/9] drivers/usb/gadget/core.c: Fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH 5/9] USB: mx53loco: add end enable USB host support on port 1   Marek Vasut
• [U-Boot] [PATCH 6/6] OMAP4: config: Add usb support for panda config.   Govindraj.R
• [U-Boot] [PATCH 6/6] OMAP4: config: Add usb support for panda config.   Govindraj.R
• [U-Boot] [PATCH 6/6] OMAP4: config: Add usb support for panda config.   Tom Rini
• [U-Boot] [PATCH 6/6] OMAP4: config: Add usb support for panda config.   Tom Rini
• [U-Boot] [PATCH 6/6] OMAP4: config: Add usb support for panda config.   Govindraj
• [U-Boot] [PATCH 6/6] OMAP4: config: Add usb support for panda config.   Govindraj
• [U-Boot] [PATCH 6/6] OMAP4: config: Add usb support for panda config.   Govindraj
• [U-Boot] [PATCH 6/6] SMDK5250: enable device tree support   Chander Kashyap
• [U-Boot] [PATCH 6/6] SMDK5250: enable device tree support   Minkyu Kang
• [U-Boot] [PATCH 6/6] SMDK5250: enable device tree support   Chander Kashyap
• [U-Boot] [PATCH 6/6] tegra: Enable keyboard for Seaboard   Simon Glass
• [U-Boot] [PATCH 6/7] CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.c   Marek Vasut
• [U-Boot] [PATCH 6/7] CHECKPATCH: ./board/esd/hh405/logo_1024_768_8bpp.c   Wolfgang Denk
• [U-Boot] [PATCH 6/7] tegra: Select I2C ordering for Seaboard   Simon Glass
• [U-Boot] [PATCH 6/8] AM35xx: Read and set ethaddr for EMAC   Tom Rini
• [U-Boot] [PATCH 6/8] AM35xx: Read and set ethaddr for EMAC   Igor Grinberg
• [U-Boot] [PATCH 6/8] AM35xx: Read and set ethaddr for EMAC   Tom Rini
• [U-Boot] [PATCH 6/8] AM35xx: Read and set ethaddr for EMAC   Wolfgang Denk
• [U-Boot] [PATCH 6/9] ARM: tny_a9260: re-add MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260   Albert ARIBAUD
• [U-Boot] [PATCH 6/9] board/w7o/flash.c: make (mostly) checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 6/9] board/w7o/flash.c: make (mostly) checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 6/9] drivers/usb/gadget/ep0.c: Fix GCC 4.6 warning   Remy Bohmer
• [U-Boot] [PATCH 6/9] drivers/usb/gadget/ep0.c: Fix GCC 4.6 warning   Marek Vasut
• [U-Boot] [PATCH 6/9] drivers/usb/gadget/ep0.c: Fix GCC 4.6 warning   Wolfgang Denk
• [U-Boot] [PATCH 6/9] drivers/usb/gadget/ep0.c: Fix GCC 4.6 warning   Anatolij Gustschin
• [U-Boot] [PATCH 6/9] USB: mx51evk: add end enable USB host support on port 1   Marek Vasut
• [U-Boot] [PATCH 7/7] CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.c   Marek Vasut
• [U-Boot] [PATCH 7/7] CHECKPATCH: ./board/esd/hh405/logo_320_240_8bpp.c   Wolfgang Denk
• [U-Boot] [PATCH 7/7] tegra: Enable I2C on Seaboard   Simon Glass
• [U-Boot] [PATCH 7/8] AM3517 EVM: Enable ethernet   Tom Rini
• [U-Boot] [PATCH 7/9] arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings   Marek Vasut
• [U-Boot] [PATCH 7/9] arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings   Anatolij Gustschin
• [U-Boot] [PATCH 7/9] arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings   Tom Rini
• [U-Boot] [PATCH 7/9] board/w7o/flash.c: Fix GCC 4.6 compile warning   Wolfgang Denk
• [U-Boot] [PATCH 7/9] board/w7o/flash.c: Fix GCC 4.6 compile warning   Wolfgang Denk
• [U-Boot] [PATCH 7/9] USB: EHCI: Allow EHCI post-powerup configuration in board files   Marek Vasut
• [U-Boot] [PATCH 8/8] AM3517 Crane: Enable ethernet   Tom Rini
• [U-Boot] [PATCH 8/9] arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings   Anatolij Gustschin
• [U-Boot] [PATCH 8/9] arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings   Marek Vasut
• [U-Boot] [PATCH 8/9] arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings   Tom Rini
• [U-Boot] [PATCH 8/9] arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings   Anatolij Gustschin
• [U-Boot] [PATCH 8/9] arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings   Tom Rini
• [U-Boot] [PATCH 8/9] board/w7o/vpd.c: make (mostly) checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 8/9] board/w7o/vpd.c: make (mostly) checkpatch clean   Wolfgang Denk
• [U-Boot] [PATCH 8/9] USB: Add generic ULPI layer and a viewport   Marek Vasut
• [U-Boot] [PATCH 85xx-next 0/8] Updates for Wind River sbc8548 board   Paul Gortmaker
• [U-Boot] [PATCH 85xx-next 1/8] Revert "SBC8548: fix address mask to allow 64M flash"   Paul Gortmaker
• [U-Boot] [PATCH 85xx-next 2/8] sbc8548: relocate 64MB user flash to sane boundary   Paul Gortmaker
• [U-Boot] [PATCH 85xx-next 3/8] sbc8548: enable ability to boot from alternate flash   Paul Gortmaker
• [U-Boot] [PATCH 85xx-next 4/8] sbc8548: Fix LBC SDRAM initialization settings   Paul Gortmaker
• [U-Boot] [PATCH 85xx-next 5/8] sbc8548: Make enabling SPD RAM configuration work   Paul Gortmaker
• [U-Boot] [PATCH 85xx-next 6/8] sbc8548: relocate fixed ddr init code to ddr.c file   Paul Gortmaker
• [U-Boot] [PATCH 85xx-next 7/8] sbc8548: enable support for hardware SPD errata workaround   Paul Gortmaker
• [U-Boot] [PATCH 85xx-next 8/8] sbc8548: Fix up local bus init to be frequency aware   Paul Gortmaker
• [U-Boot] [PATCH 9/9] arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings   Marek Vasut
• [U-Boot] [PATCH 9/9] arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings   Anatolij Gustschin
• [U-Boot] [PATCH 9/9] arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings   Anatolij Gustschin
• [U-Boot] [PATCH 9/9] arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings   Tom Rini
• [U-Boot] [PATCH 9/9] arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings   R, Sricharan
• [U-Boot] [PATCH 9/9] board/w7o/vpd.c: Fix GCC 4.6 compile warnings   Wolfgang Denk
• [U-Boot] [PATCH 9/9] board/w7o/vpd.c: Fix GCC 4.6 compile warnings   Wolfgang Denk
• [U-Boot] [PATCH 9/9] USB: efikamx: Enable USB on EfikaMX and EfikaSB   Marek Vasut
• [U-Boot] [PATCH I2C] fix: error ATMEL_FIO_BASE undeclared, if use I2C_Soft on AT91   esw at bus-elektronik.de
• [U-Boot] [PATCH RESEND v1 3/3] usb:gadget:s5p Enable the USB Gadget framework at Exynos4210 (C210 Universal)   Lukasz Majewski
• [U-Boot] [PATCH RESEND v2 3/3] usb:gadget:s5p Enable the USB Gadget framework at Exynos4210 (C210 Universal)   Lukasz Majewski
• [U-Boot] [PATCH RESEND v2 3/3] usb:gadget:s5p Enable the USB Gadget framework at Exynos4210 (C210 Universal)   Minkyu Kang
• [U-Boot] [PATCH RFC] sandbox: Add tap based networking   Matthias Weisser
• [U-Boot] [PATCH RFC] sandbox: Add tap based networking   Mike Frysinger
• [U-Boot] [PATCH v1 0/2] Add i2c TPM driver   Che-Liang Chiou
• [U-Boot] [PATCH v1 1/2] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Wolfgang Denk
• [U-Boot] [PATCH v1 1/2] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Che-liang Chiou
• [U-Boot] [PATCH v1 1/2] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Wolfgang Denk
• [U-Boot] [PATCH v1 1/2] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Che-liang Chiou
• [U-Boot] [PATCH v1 1/2] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Wolfgang Denk
• [U-Boot] [PATCH v1 1/2] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Che-liang Chiou
• [U-Boot] [PATCH v1 1/2] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Che-Liang Chiou
• [U-Boot] [PATCH v1 1/5] serial: cosmetic checkpatch compliance   Wolfgang Denk
• [U-Boot] [PATCH v1 2/2] tpm: Add i2c TPM driver   Che-Liang Chiou
• [U-Boot] [PATCH v1 2/2] tpm: Add i2c TPM driver   Mike Frysinger
• [U-Boot] [PATCH v1 2/2] tpm: Add i2c TPM driver   Wolfgang Denk
• [U-Boot] [PATCH v1 2/2] tpm: Add i2c TPM driver   Che-liang Chiou
• [U-Boot] [PATCH v1 2/2] tpm: Add i2c TPM driver   Che-liang Chiou
• [U-Boot] [PATCH v1 2/5] serial: constify serial_assign()   Wolfgang Denk
• [U-Boot] [PATCH v1 3/3] usb:gadget:s5p Enable the USB Gadget framework at C210 Universal   Remy Bohmer
• [U-Boot] [PATCH v1 3/5] env: unify logic to check and apply changes   Simon Glass
• [U-Boot] [PATCH V10 0/7] SPL Linux boot   Simon Schwarz
• [U-Boot] [PATCH V10 0/7] SPL Linux boot   Simon Schwarz
• [U-Boot] [PATCH V10 0/7] SPL Linux boot   Stefano Babic
• [U-Boot] [PATCH V10 0/7] SPL Linux boot   Simon Schwarz
• [U-Boot] [PATCH V10 1/7] Add cmd_spl command   Simon Schwarz
• [U-Boot] [PATCH V10 2/7] devki8000: add config for spl command   Simon Schwarz
• [U-Boot] [PATCH V10 3/7] omap-common: Add NAND SPL linux booting   Simon Schwarz
• [U-Boot] [PATCH V10 4/7] devkit8000/spl: init GPMC for dm9000 in SPL   Simon Schwarz
• [U-Boot] [PATCH V10 5/7] omap-common/spl: Add linux boot to SPL   Simon Schwarz
• [U-Boot] [PATCH V10 5/7] omap-common/spl: Add linux boot to SPL   Stefano Babic
• [U-Boot] [PATCH V10 6/7] omap/spl: change output of spl_parse_image_header   Simon Schwarz
• [U-Boot] [PATCH V10 7/7] devkit8000: Implement and activate direct OS boot   Simon Schwarz
• [U-Boot] [PATCH V11 01/13] Add cmd_spl command   Stefano Babic
• [U-Boot] [PATCH V11 02/13] devki8000: add config for spl command   Stefano Babic
• [U-Boot] [PATCH V11 08/13] Add cache functions to SPL for armv7   Stefano Babic
• [U-Boot] [PATCH V11 03/13] omap-common: Add NAND SPL linux booting   Stefano Babic
• [U-Boot] [PATCH V11 04/13] devkit8000/spl: init GPMC for dm9000 in SPL   Stefano Babic
• [U-Boot] [PATCH V11 05/13] omap-common/spl: Add linux boot to SPL   Stefano Babic
• [U-Boot] [PATCH V11 06/13] omap/spl: change output of spl_parse_image_header   Stefano Babic
• [U-Boot] [PATCH V11 07/13] devkit8000: Implement and activate direct OS boot   Stefano Babic
• [U-Boot] [PATCH V11 08/13] Add cache functions to SPL for armv7   Tom Rini
• [U-Boot] [PATCH V11 09/13] OMAP3: SPL: do not call I2C init if no I2C is set.   Tom Rini
• [U-Boot] [PATCH V11 09/13] OMAP3: SPL: do not call I2C init if no I2C is set.   Stefano Babic
• [U-Boot] [PATCH V11 10/13] OMAP3: move SPL files to be used by other architectures.   Stefano Babic
• [U-Boot] [PATCH V11 10/13] OMAP3: move SPL files to be used by other architectures.   Tom Rini
• [U-Boot] [PATCH V11 10/13] OMAP3: move SPL files to be used by other architectures.   Stefano Babic
• [U-Boot] [PATCH V11 11/13] TI: SPL: make SPL available for other SOCs as TI   Tom Rini
• [U-Boot] [PATCH V11 11/13] TI: SPL: make SPL available for other SOCs as TI   Tom Rini
• [U-Boot] [PATCH V11 11/13] TI: SPL: make SPL available for other SOCs as TI   Stefano Babic
• [U-Boot] [PATCH V11 11/13] TI: SPL: make SPL available for other SOCs as TI   Stefano Babic
• [U-Boot] [PATCH V11 12/13] SPL: call cleanup_before_linux() before booting Linux   Stefano Babic
• [U-Boot] [PATCH V11 13/13] OMAP3: twister: add support to boot Linux from SPL   Stefano Babic
• [U-Boot] [PATCH V11 13/13] OMAP3: twister: add support to boot Linux from SPL   Tom Rini
• [U-Boot] [PATCH V11 13/13] OMAP3: twister: add support to boot Linux from SPL   Stefano Babic
• [U-Boot] [PATCH v2 0/17] tegra: Add fdt definitions and USB driver   Simon Glass
• [U-Boot] [PATCH v2 0/1]: USB: Fix ARM CONFIG_USB_TTY boards   Tom Rini
• [U-Boot] [PATCH v2 0/2] Add i2c TPM driver   Che-Liang Chiou
• [U-Boot] [PATCH v2 0/2] Add i2c TPM driver   Wolfgang Denk
• [U-Boot] [PATCH V2 0/2] Exynos Related fixes   Chander Kashyap
• [U-Boot] [PATCH v2 0/3] Added SPL support   Chandan Nath
• [U-Boot] [PATCH v2 0/3] Enable access to FAT filesystem in an ISO9660 El-Torito volume   Kyle Moffett
• [U-Boot] [PATCH v2 0/3] env: handle special variables and selective env default   Gerlando Falauto
• [U-Boot] [PATCH v2 0/3] fix several printf() length modifers   Andreas Bießmann
• [U-Boot] [PATCH v2 0/3] i.mx6q: Add the ethernet function support   Jason Liu
• [U-Boot] [PATCH v2 0/4] mmc: Implement central card-detection.   Thierry Reding
• [U-Boot] [PATCH v2 0/6] Add support for the 32 bit boot protocol and coreboot table parsing.   Gabe Black
• [U-Boot] [PATCH v2 0/6] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH v2 0/6] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH v2 0/6] reboard: Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH v2 0/6] reboard: Introduce generic relocation feature   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/6] reboard: Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH v2 0/6] reboard: Introduce generic relocation feature   Albert ARIBAUD
• [U-Boot] [PATCH v2 0/6] reboard: Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH v2 0/6] reboard: Introduce generic relocation feature   Graeme Russ
• [U-Boot] [PATCH v2 0/6] reboard: Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH v2 0/6] tegra: Enable keyboard with matrix keyboard driver   Simon Glass
• [U-Boot] [PATCH v2 0/7] Tidy up ARM link scripts   Simon Glass
• [U-Boot] [PATCH v2 0/9] Add support for the OpenRISC architecture   Stefan Kristiansson
• [U-Boot] [PATCH v2 0/9] Unified command execution in one place   Simon Glass
• [U-Boot] [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Simon Glass
• [U-Boot] [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Stephen Warren
• [U-Boot] [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Simon Glass
• [U-Boot] [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Stephen Warren
• [U-Boot] [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Simon Glass
• [U-Boot] [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Scott Wood
• [U-Boot] [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Stephen Warren
• [U-Boot] [PATCH v2 01/17] fdt: Tidy up a few fdtdec problems   Simon Glass
• [U-Boot] [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [U-Boot] [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Stephen Warren
• [U-Boot] [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [U-Boot] [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Stephen Warren
• [U-Boot] [PATCH v2 02/17] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [U-Boot] [PATCH v2 03/17] Add gpio_request() to asm-generic header   Simon Glass
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Stephen Warren
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Stephen Warren
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Stephen Warren
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Mike Frysinger
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [U-Boot] [PATCH v2 04/17] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [U-Boot] [PATCH v2 05/17] arm: fdt: Ensure that an embedded fdt is word-aligned   Simon Glass
• [U-Boot] [PATCH v2 06/17] arm: fdt: Add skeleton device tree file from kernel   Simon Glass
• [U-Boot] [PATCH v2 07/17] tegra: fdt: Add Tegra2x device tree file from kernel   Simon Glass
• [U-Boot] [PATCH v2 08/17] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel   Simon Glass
• [U-Boot] [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [U-Boot] [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [U-Boot] [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [U-Boot] [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Stephen Warren
• [U-Boot] [PATCH v2 09/17] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Jason Liu
• [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Fabio Estevam
• [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Fabio Estevam
• [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Fabio Estevam
• [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Shawn Guo
• [U-Boot] [PATCH v2 1/1] USB: Use (get|put)_unaligned for accessing wMaxPacketSize   Remy Bohmer
• [U-Boot] [PATCH v2 1/1] USB: Use (get|put)_unaligned for accessing wMaxPacketSize   Tom Rini
• [U-Boot] [PATCH V2 1/2] Exynos: PWM: Add TCMPB3 field in pwm structure   Chander Kashyap
• [U-Boot] [PATCH V2 1/2] Exynos: PWM: Add TCMPB3 field in pwm structure   Wolfgang Denk
• [U-Boot] [PATCH V2 1/2] Exynos: PWM: Add TCMPB3 field in pwm structure   Chander Kashyap
• [U-Boot] [PATCH v2 1/2] nds32: add linkage support   Macpaul Lin
• [U-Boot] [PATCH v2 1/2] net: add Calxeda xgmac driver   Rob Herring
• [U-Boot] [PATCH v2 1/2] net: add Calxeda xgmac driver   Mike Frysinger
• [U-Boot] [PATCH v2 1/2] tpm: Rename generic_lpc_tpm to tpm_tis_lpc   Che-Liang Chiou
• [U-Boot] [PATCH v2 1/3] ARM:AM33XX: Fix ddr and timer register offset   Chandan Nath
• [U-Boot] [PATCH v2 1/3] cmd_sf.c: fix printf() length modifier   Andreas Bießmann
• [U-Boot] [PATCH v2 1/3] cmd_sf.c: fix printf() length modifier   Mike Frysinger
• [U-Boot] [PATCH v2 1/3] cmd_sf.c: fix printf() length modifier   Wolfgang Denk
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Simon Glass
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Mike Frysinger
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Gerlando Falauto
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Wolfgang Denk
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Gerlando Falauto
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Wolfgang Denk
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Simon Glass
• [U-Boot] [PATCH v2 1/3] env: unify logic to check and apply changes   Gerlando Falauto
• [U-Boot] [PATCH v2 1/3] fs/fat: Fix FAT detection to support non-DOS partition tables   Kyle Moffett
• [U-Boot] [PATCH v2 1/3] i.mx: i.mx6q: Add the enet clock function   Stefano Babic
• [U-Boot] [PATCH v2 1/3] i.mx: i.mx6q: Add the enet clock function   Stefano Babic
• [U-Boot] [PATCH v2 1/3] i.mx: i.mx6q: Add the enet clock function   Jason Liu
• [U-Boot] [PATCH v2 1/3] image: add support for Android's boot image format   Aneesh V
• [U-Boot] [PATCH v2 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v2 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v2 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v2 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v2 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v2 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Stefano Babic
• [U-Boot] [PATCH v2 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Stefano Babic
• [U-Boot] [PATCH v2 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Stefano Babic
• [U-Boot] [PATCH v2 1/4] mmc: Change board_mmc_getcd() signature.   Thierry Reding
• [U-Boot] [PATCH v2 1/4] mmc: Change board_mmc_getcd() signature.   Marek Vasut
• [U-Boot] [PATCH v2 1/4] mmc: Change board_mmc_getcd() signature.   Thierry Reding
• [U-Boot] [PATCH v2 1/4] mmc: Change board_mmc_getcd() signature.   Marek Vasut
• [U-Boot] [PATCH v2 1/4] USB: ULPI: switch argument type from u8 to unsigned   Simon Glass
• [U-Boot] [PATCH v2 1/4] USB: ULPI: switch argument type from u8 to unsigned   Remy Bohmer
• [U-Boot] [PATCH v2 1/4] USB: ULPI: switch argument type from u8 to unsigned   Igor Grinberg
• [U-Boot] [PATCH v2 1/6] drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts   Andreas Müller
• [U-Boot] [PATCH v2 1/6] reboard: Create reloc.h and include it where needed   Simon Glass
• [U-Boot] [PATCH v2 1/6] reboard: Create reloc.h and include it where needed   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/6] reboard: Create reloc.h and include it where needed   Simon Glass
• [U-Boot] [PATCH v2 1/6] reboard: Create reloc.h and include it where needed   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/6] reboard: Create reloc.h and include it where needed   Graeme Russ
• [U-Boot] [PATCH v2 1/6] reboard: Create reloc.h and include it where needed   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/6] reboard: Create reloc.h and include it where needed   Simon Glass
• [U-Boot] [PATCH v2 1/6] reboard: Create reloc.h and include it where needed   Albert ARIBAUD
• [U-Boot] [PATCH v2 1/6] tegra: fdt: Add keyboard controller definition   Simon Glass
• [U-Boot] [PATCH v2 1/6] x86: Import code from coreboot's libpayload to parse the coreboot table   Gabe Black
• [U-Boot] [PATCH v2 1/9] Remove CMD_PXE's static on run_command()   Simon Glass
• [U-Boot] [PATCH v2 10/17] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v2 10/17] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Stephen Warren
• [U-Boot] [PATCH v2 11/17] usb: Add support for data alignment   Simon Glass
• [U-Boot] [PATCH v2 11/17] usb: Add support for data alignment   Remy Bohmer
• [U-Boot] [PATCH v2 11/17] usb: Add support for data alignment   Simon Glass
• [U-Boot] [PATCH v2 11/17] usb: Add support for data alignment   Remy Bohmer
• [U-Boot] [PATCH v2 11/17] usb: Add support for data alignment   Simon Glass
• [U-Boot] [PATCH v2 12/17] usb: Add support for txfifo threshold   Simon Glass
• [U-Boot] [PATCH v2 12/17] usb: Add support for txfifo threshold   Stephen Warren
• [U-Boot] [PATCH v2 12/17] usb: Add support for txfifo threshold   Simon Glass
• [U-Boot] [PATCH v2 12/17] usb: Add support for txfifo threshold   Stephen Warren
• [U-Boot] [PATCH v2 12/17] usb: Add support for txfifo threshold   Simon Glass
• [U-Boot] [PATCH v2 13/17] tegra: usb: Add support for Tegra USB peripheral   Simon Glass
• [U-Boot] [PATCH v2 13/17] tegra: usb: Add support for Tegra USB peripheral   Remy Bohmer
• [U-Boot] [PATCH v2 14/17] tegra: usb: Add USB support to nvidia boards   Simon Glass
• [U-Boot] [PATCH v2 15/17] tegra: usb: Add common USB defines for tegra2 boards   Simon Glass
• [U-Boot] [PATCH v2 16/17] tegra: usb: Enable USB on Seaboard   Simon Glass
• [U-Boot] [PATCH v2 17/17] tegra: fdt: Enable FDT support for Seaboard   Simon Glass
• [U-Boot] [PATCH v2 2/2] ARM: highbank: enable networking and pxe   Rob Herring
• [U-Boot] [PATCH v2 2/2] ARM: highbank: enable networking and pxe   Mike Frysinger
• [U-Boot] [PATCH V2 2/2] ARM: omap3: add support to Technexion twister board   Wolfgang Denk
• [U-Boot] [PATCH V2 2/2] ARM: omap3: add support to Technexion twister board   Tapani Utriainen
• [U-Boot] [PATCH V2 2/2] Exynos: Fix ARM Clock frequency calculation   Chander Kashyap
• [U-Boot] [PATCH v2 2/2] nds32/ag101/watchdog.S: add linkage support   Macpaul Lin
• [U-Boot] [PATCH v2 2/2] tpm: Add i2c TPM driver   Che-Liang Chiou
• [U-Boot] [PATCH v2 2/3] ARM:AM33XX: Add mmc/sd support   Chandan Nath
• [U-Boot] [PATCH v2 2/3] env: check and apply changes on delete/destroy   Gerlando Falauto
• [U-Boot] [PATCH v2 2/3] env: check and apply changes on delete/destroy   Simon Glass
• [U-Boot] [PATCH v2 2/3] env: check and apply changes on delete/destroy   Gerlando Falauto
• [U-Boot] [PATCH v2 2/3] env: check and apply changes on delete/destroy   Wolfgang Denk
• [U-Boot] [PATCH v2 2/3] env: check and apply changes on delete/destroy   Gerlando Falauto
• [U-Boot] [PATCH v2 2/3] env: check and apply changes on delete/destroy   Wolfgang Denk
• [U-Boot] [PATCH v2 2/3] fat.c: fix printf() length modifier   Andreas Bießmann
• [U-Boot] [PATCH v2 2/3] fat.c: fix printf() length modifier   Mike Frysinger
• [U-Boot] [PATCH v2 2/3] fat.c: fix printf() length modifier   Wolfgang Denk
• [U-Boot] [PATCH v2 2/3] fec: add the i.mx6q enet driver support   Jason Liu
• [U-Boot] [PATCH v2 2/3] fec: add the i.mx6q enet driver support   Stefano Babic
• [U-Boot] [PATCH v2 2/3] fs/fat: Improve error handling   Kyle Moffett
• [U-Boot] [PATCH v2 2/3] mx28: Let dram_init be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v2 2/3] mx28: Let dram_init be common for mx28   Marek Vasut
• [U-Boot] [PATCH v2 2/4] macb: support higher rate GEM MDIO clock divisors   Wolfgang Denk
• [U-Boot] [PATCH v2 2/4] macb: support higher rate GEM MDIO clock divisors   Wolfgang Denk
• [U-Boot] [PATCH v2 2/4] mmc: Implement card detection.   Thierry Reding
• [U-Boot] [PATCH v2 2/6] board/overo/overo.c: replace printf with one argument by puts   Andreas Müller
• [U-Boot] [PATCH v2 2/6] reboard: define CONFIG_SYS_SKIP_RELOC for all archs   Simon Glass
• [U-Boot] [PATCH v2 2/6] reboard: define CONFIG_SYS_SKIP_RELOC for all archs   Simon Glass
• [U-Boot] [PATCH v2 2/6] reboard: define CONFIG_SYS_SKIP_RELOC for all archs   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/6] tegra: fdt: Add keyboard definitions for Seaboard   Simon Glass
• [U-Boot] [PATCH v2 2/6] x86: Clean up the x86 zimage code in preparation to extend it   Gabe Black
• [U-Boot] [PATCH v2 2/9] Rename run_command() to builtin_run_command()   Simon Glass
• [U-Boot] [PATCH v2 3/3] ARM:AM33XX: Add SPL support for AM335X EVM   Chandan Nath
• [U-Boot] [PATCH v2 3/3] avr32:mmu.c: fix printf() length modifier   Mike Frysinger
• [U-Boot] [PATCH v2 3/3] avr32:mmu.c: fix printf() length modifier   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] avr32:mmu.c: fix printf() length modifier   Andreas Bießmann
• [U-Boot] [PATCH v2 3/3] env: make "env default" selective, check and apply   Gerlando Falauto
• [U-Boot] [PATCH v2 3/3] env: make "env default" selective, check and apply   Gerlando Falauto
• [U-Boot] [PATCH v2 3/3] env: make "env default" selective, check and apply   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] env: make "env default" selective, check and apply   Simon Glass
• [U-Boot] [PATCH v2 3/3] i.mx6q: arm2: Add the enet function support   Marek Vasut
• [U-Boot] [PATCH v2 3/3] i.mx6q: arm2: Add the enet function support   Stefano Babic
• [U-Boot] [PATCH v2 3/3] i.mx6q: arm2: Add the enet function support   Jason Liu
• [U-Boot] [PATCH v2 3/3] image: Allow images to indicate they're loadable at any address   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] image: Allow images to indicate they're loadable at any address   Linus Walleij
• [U-Boot] [PATCH v2 3/3] image: Allow images to indicate they're loadable at any address   Linus Walleij
• [U-Boot] [PATCH v2 3/3] image: Allow images to indicate they're loadable at any address   Stephen Warren
• [U-Boot] [PATCH v2 3/3] mx28evk: Add initial support for MX28EVK board   Stefano Babic
• [U-Boot] [PATCH v2 3/3] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v2 3/3] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v2 3/3] usb_storage: Fix EHCI "out of buffer pointers" with CD-ROM   Kyle Moffett
• [U-Boot] [PATCH v2 3/4] mmc: fsl_esdhc: Implement card-detect hook.   Thierry Reding
• [U-Boot] [PATCH v2 3/6] fdt: Add fdtdec functions to read byte array   Simon Glass
• [U-Boot] [PATCH v2 3/6] include/configs/omap3_overo.h: several cleanups   Andreas Müller
• [U-Boot] [PATCH v2 3/6] reboard: Add generic relocation feature   Simon Glass
• [U-Boot] [PATCH v2 3/6] x86: Add support for booting Linux using the 32 bit boot protocol   Gabe Black
• [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files   Michal Simek
• [U-Boot] [PATCH v2 3/9] openrisc: Add cpu files   Stefan Kristiansson
• [U-Boot] [PATCH v2 3/9] Rename run_command2() to run_command()   Simon Glass
• [U-Boot] [PATCH v2 4/4] mmc: tegra2: Implement card-detect hook.   Thierry Reding
• [U-Boot] [PATCH v2 4/6] drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM   Andreas Müller
• [U-Boot] [PATCH v2 4/6] reboard: arm: Add processor function library   Albert ARIBAUD
• [U-Boot] [PATCH v2 4/6] reboard: arm: Add processor function library   Simon Glass
• [U-Boot] [PATCH v2 4/6] reboard: arm: Add processor function library   Simon Glass
• [U-Boot] [PATCH v2 4/6] reboard: arm: Add processor function library   Simon Glass
• [U-Boot] [PATCH v2 4/6] tegra: Add tegra keyboard support   Simon Glass
• [U-Boot] [PATCH v2 4/6] x86: Add infrastructure to extract an e820 table from the coreboot tables   Gabe Black
• [U-Boot] [PATCH v2 4/6] x86: Add infrastructure to extract an e820 table from the coreboot tables   Graeme Russ
• [U-Boot] [PATCH v2 4/6] x86: Add infrastructure to extract an e820 table from the coreboot tables   Gabe Black
• [U-Boot] [PATCH v2 4/6] x86: Add infrastructure to extract an e820 table from the coreboot tables   Graeme Russ
• [U-Boot] [PATCH v2 4/9] Stop using builtin_run_command()   Simon Glass
• [U-Boot] [PATCH v2 5/6] OMAP SPL: call timer_init in s_init to make udelay work earlier   Andreas Müller
• [U-Boot] [PATCH v2 5/6] reboard: arm: Move over to generic relocation   Simon Glass
• [U-Boot] [PATCH v2 5/6] tegra: Switch on console mux and use environment for console   Simon Glass
• [U-Boot] [PATCH v2 5/6] x86: Refactor the zboot innards so they can be reused with a vboot image   Gabe Black
• [U-Boot] [PATCH v2 5/9] Don't include standard parser if hush is used   Simon Glass
• [U-Boot] [PATCH v2 6/6] overo: add SPL support / CONFIG_SYS_TEXT_BASE changed to 0x80100000   Andreas Müller
• [U-Boot] [PATCH v2 6/6] reboard: arm: Remove unused code in start.S   Albert ARIBAUD
• [U-Boot] [PATCH v2 6/6] reboard: arm: Remove unused code in start.S   Simon Glass
• [U-Boot] [PATCH v2 6/6] reboard: arm: Remove unused code in start.S   Simon Glass
• [U-Boot] [PATCH v2 6/6] tegra: Enable keyboard for Seaboard   Simon Glass
• [U-Boot] [PATCH v2 6/6] x86: Add support for specifying an initrd with the zboot command   Gabe Black
• [U-Boot] [Patch v2 6/7] powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver   Wolfgang Denk
• [U-Boot] [Patch v2 6/7] powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver   Wolfgang Denk
• [U-Boot] [Patch v2 6/7] powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver   York Sun
• [U-Boot] [PATCH v2 6/9] Create a single cmd_call() function to handle command execution   Simon Glass
• [U-Boot] [PATCH v2 7/9] Remove interleave of non-U-Boot code in hush   Simon Glass
• [U-Boot] [PATCH v2 8/9] Add cmd_process() to process commands in one place   Simon Glass
• [U-Boot] [PATCH v2 9/9] Convert cmd_usage() calls in common to use a return value   Simon Glass
• [U-Boot] [PATCH v2] Add a CBFS driver and commands to u-boot   Gabe Black
• [U-Boot] [PATCH v2] Add a CBFS driver and commands to u-boot   Wolfgang Denk
• [U-Boot] [PATCH v2] Add a CBFS driver and commands to u-boot   Gabe Black
• [U-Boot] [PATCH v2] Add a CBFS driver and commands to u-boot   Wolfgang Denk
• [U-Boot] [PATCH v2] add a git mailrc file for maintainers   Wolfgang Denk
• [U-Boot] [PATCH V2] ARM: fix s3c24x0 timer code   David Müller
• [U-Boot] [PATCH V2] ARM: fix s3c24x0 timer code   Andreas Bießmann
• [U-Boot] [PATCH V2] ARM: fix s3c24x0 timer code   Albert ARIBAUD
• [U-Boot] [PATCH V2] arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master   Wolfgang Denk
• [U-Boot] [PATCH V2] arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH V2] arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master   Stephen Warren
• [U-Boot] [PATCH v2] ARMV7: Add support For Logic OMAP35x/DM37x modules   Peter Barada
• [U-Boot] [PATCH v2] ARMV7: Add support For Logic OMAP35x/DM37x modules   Tom Rini
• [U-Boot] [PATCH v2] ARMV7: Add support For Logic OMAP35x/DM37x modules   Peter Barada
• [U-Boot] [PATCH v2] ARMV7: Add support For Logic OMAP35x/DM37x modules   Tom Rini
• [U-Boot] [PATCH v2] ARMV7: Add support For Logic OMAP35x/DM37x modules   Igor Grinberg
• [U-Boot] [PATCH v2] ARMV7: Add support For Logic OMAP35x/DM37x modules   Wolfgang Denk
• [U-Boot] [PATCH v2] cmd_bdinfo: simplify local static funcs a bit   Wolfgang Denk
• [U-Boot] [PATCH v2] cmd_bdinfo: simplify local static funcs a bit   Mike Frysinger
• [U-Boot] [PATCH v2] cmd_fat: add FAT write command   Donggeun Kim
• [U-Boot] [PATCH v2] cmd_fat: add FAT write command   Mike Frysinger
• [U-Boot] [PATCH V2] davinci: Remove unwanted memsize.c from hawkboard's nand spl build   Sughosh Ganu
• [U-Boot] [PATCH V2] devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss   Simon Schwarz
• [U-Boot] [PATCH V2] devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss   Thomas Weber
• [U-Boot] [PATCH v2] Devkit8000: Switch over to enable_gpmc_cs_config   Tom Rini
• [U-Boot] [PATCH v2] Devkit8000: Switch over to enable_gpmc_cs_config   Thomas Weber
• [U-Boot] [PATCH v2] drivers/net/e1000.c: Fix GCC 4.6 build warnings   Moffett, Kyle D
• [U-Boot] [PATCH v2] drivers/net/e1000.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH v2] drivers/net/e1000.c: Fix GCC 4.6 build warnings   Anatolij Gustschin
• [U-Boot] [PATCH v2] env_nand: Remove DEBUG definition   Thomas Weber
• [U-Boot] [PATCH v2] env_nand: Remove DEBUG definition   Wolfgang Denk
• [U-Boot] [PATCH V2] Fix breakage after removing common.h from export.h   Stefano Babic
• [U-Boot] [PATCH V2] Fix breakage after removing common.h from export.h   Wolfgang Denk
• [U-Boot] [PATCH v2] global_data: unify global flag defines   Mike Frysinger
• [U-Boot] [PATCH v2] global_data: unify global flag defines   Graeme Russ
• [U-Boot] [PATCH v2] global_data: unify global flag defines   Graeme Russ
• [U-Boot] [PATCH v2] global_data: unify global flag defines   Mike Frysinger
• [U-Boot] [PATCH v2] global_data: unify global flag defines   Mike Frysinger
• [U-Boot] [PATCH v2] global_data: unify global flag defines   Graeme Russ
• [U-Boot] [PATCH v2] linkage.h: move from blackfin to common includes   Mike Frysinger
• [U-Boot] [PATCH v2] linkage.h: move from blackfin to common includes   Macpaul Lin
• [U-Boot] [PATCH V2] M28: Cleanup memsize.o OOT build   Marek Vasut
• [U-Boot] [PATCH v2] MIPS: fix endianess handling   Daniel Schwierzeck
• [U-Boot] [PATCH v2] MIPS: tb0229: fix compile errors   Daniel Schwierzeck
• [U-Boot] [PATCH v2] MIPS: tb0229: fix compile errors   Wolfgang Denk
• [U-Boot] [PATCH v2] MIPS: tb0229: fix compile errors   Wolfgang Denk
• [U-Boot] [PATCH v2] mvgbe: remove setting of ethaddr within the driver   Wolfgang Denk
• [U-Boot] [PATCH v2] mvgbe: remove setting of ethaddr within the driver   Wolfgang Denk
• [U-Boot] [PATCH V2] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH V2] nand_spl_simple: store ecc data on the stack   Tom Rini
• [U-Boot] [PATCH V2] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH v2] nds32: add header of amic multicore interrupt controller.   Macpaul Lin
• [U-Boot] [PATCH v2] ne2000: Convert to new net-multi model, fixes build of three boards   Marek Vasut
• [U-Boot] [PATCH v2] ne2000: Convert to new net-multi model, fixes build of three boards   Wolfgang Denk
• [U-Boot] [PATCH v2] ne2000: Convert to new net-multi model, fixes build of three boards   Mike Frysinger
• [U-Boot] [PATCH v2] net: allow setting env enetaddr from net device setting   Rob Herring
• [U-Boot] [PATCH v2] net: Fix arguments in tftpput command   Simon Glass
• [U-Boot] [PATCH v2] net: Fix arguments in tftpput command   Wolfgang Denk
• [U-Boot] [PATCH V2] net: Make sure IPaddr_t is 32 bits in size   Matthias Weisser
• [U-Boot] [PATCH V2] net: Make sure IPaddr_t is 32 bits in size   Wolfgang Denk
• [U-Boot] [PATCH v2] omap4_panda: Initialize the USB phy   clalancette at gmail.com
• [U-Boot] [PATCH v2] omap4_panda: Initialize the USB phy   Chris Lalancette
• [U-Boot] [PATCH v2] omap4_panda: Initialize the USB phy   Tom Rini
• [U-Boot] [PATCH v2] omap4_panda: Initialize the USB phy   Aneesh V
• [U-Boot] [PATCH v2] omap4_panda: Initialize the USB phy   Chris Lalancette
• [U-Boot] [PATCH v2] omap4_panda: Initialize the USB phy   Tom Rini
• [U-Boot] [PATCH v2] Phy/Marvell: Rewrite the MV88E1111 phy config function based on kernel code   Wolfgang Denk
• [U-Boot] [PATCH v2] pm9261: init serial console before relocation   Asen Chavdarov Dimov
• [U-Boot] [PATCH v2] pm9261: init serial console before relocation   Anatolij Gustschin
• [U-Boot] [PATCH v2] pm9263: init serial console before relocation   Asen Chavdarov Dimov
• [U-Boot] [PATCH v2] pm9263: init serial console before relocation   Anatolij Gustschin
• [U-Boot] [PATCH v2] pm9g45: init serial console before relocation   Asen Chavdarov Dimov
• [U-Boot] [PATCH v2] pm9g45: init serial console before relocation   Anatolij Gustschin
• [U-Boot] [PATCH v2] powerpc/mpc83xx: set TXEQA/TXEQE value for mpc837XE sata   Huang Changming-R66093
• [U-Boot] [PATCH v2] powerpc/mpc83xx: set TXEQA/TXEQE value for mpc837XE sata   Kim Phillips
• [U-Boot] [PATCH V2] ppc4xx: fix PMC440 painit command   Stefan Roese
• [U-Boot] [PATCH v2] Print program basename instead of whole path in usage()   Wolfgang Denk
• [U-Boot] [PATCH v2] Print program basename instead of whole path in usage()   Horst Kronstorfer
• [U-Boot] [PATCH V2] sandbox: Add timer simulation   Mike Frysinger
• [U-Boot] [PATCH V2] sandbox: Add timer simulation   Mike Frysinger
• [U-Boot] [PATCH v2] sandbox: fix compiling of cpu/os.c   Mike Frysinger
• [U-Boot] [PATCH v2] skat91: add support for SK-AT91SAM9/SIM508 board   Vladimir Zapolskiy
• [U-Boot] [PATCH v2] Standalone Apps: Standalone apps should need only exports.h.   Wolfgang Denk
• [U-Boot] [PATCH v2] Standalone Apps: Standalone apps should need only exports.h.   Kumar Gala
• [U-Boot] [PATCH v2] tools/setlocalversion: Update from the Linux Kernel   Mike Frysinger
• [U-Boot] [PATCH v2] tools/setlocalversion: Update from the Linux Kernel   Kyle Moffett
• [U-Boot] [PATCH v2] tools/setlocalversion: Update from the Linux Kernel   Moffett, Kyle D
• [U-Boot] [PATCH v2] Update pci_ids.h from current Linux sources   Anatolij Gustschin
• [U-Boot] [PATCH v2] x86: Add a pointer to the global data structure to point to the device tree   Gabe Black
• [U-Boot] [PATCH v3 0/16] tegra: Add fdt definitions and USB driver   Simon Glass
• [U-Boot] [PATCH V3 0/2] *** Add ext4 filesystem support in uboot ***   uma.shankar at samsung.com
• [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.   Thierry Reding
• [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.   Mike Frysinger
• [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.   Thierry Reding
• [U-Boot] [PATCH v3 0/4] mmc: Implement central card-detection.   Andy Fleming
• [U-Boot] [PATCH V3 0/5] i.mx: add the initial i.mx6q core/board support   Stefano Babic
• [U-Boot] [PATCH V3 0/5] i.mx: add the initial i.mx6q core/board support   Dirk Behme
• [U-Boot] [PATCH v3 0/6] Add support for the 32 bit boot protocol and coreboot table parsing.   Gabe Black
• [U-Boot] [PATCH v3 0/6] Add support for the 32 bit boot protocol and coreboot table parsing.   Graeme Russ
• [U-Boot] [PATCH v3 0/6] Introduce generic relocation feature   Simon Glass
• [U-Boot] [PATCH v3 01/16] fdt: Tidy up a few fdtdec problems   Simon Glass
• [U-Boot] [PATCH v3 02/16] fdt: Add functions to access phandles, arrays and bools   Simon Glass
• [U-Boot] [PATCH v3 03/16] Add gpio_request() to asm-generic header   Simon Glass
• [U-Boot] [PATCH v3 04/16] fdt: Add basic support for decoding GPIO definitions   Simon Glass
• [U-Boot] [PATCH v3 05/16] arm: fdt: Ensure that an embedded fdt is word-aligned   Simon Glass
• [U-Boot] [PATCH v3 06/16] arm: fdt: Add skeleton device tree file from kernel   Simon Glass
• [U-Boot] [PATCH v3 07/16] tegra: fdt: Add Tegra2x device tree file from kernel   Simon Glass
• [U-Boot] [PATCH v3 08/16] tegra: fdt: Add device tree file for Tegra2 Seaboard from kernel   Simon Glass
• [U-Boot] [PATCH v3 09/16] tegra: usb: fdt: Add additional device tree definitions for USB ports   Simon Glass
• [U-Boot] [PATCH V3 1/2] ARM: omap3: added common configuration for Technexion TAM3517   Stefano Babic
• [U-Boot] [PATCH V3 1/2] ARM: omap3: added common configuration for Technexion TAM3517   Tom Rini
• [U-Boot] [PATCH V3 1/2] ext4fs ls load support   uma.shankar at samsung.com
• [U-Boot] [PATCH v3 1/2] net: add Calxeda xgmac driver   Rob Herring
• [U-Boot] [PATCH v3 1/2] net: add Calxeda xgmac driver   Wolfgang Denk
• [U-Boot] [PATCH v3 1/2] net: add Calxeda xgmac driver   Rob Herring
• [U-Boot] [PATCH v3 1/2] net: add Calxeda xgmac driver   Wolfgang Denk
• [U-Boot] [PATCH v3 1/2] net: add Calxeda xgmac driver   Rob Herring
• [U-Boot] [PATCH v3 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v3 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Wolfgang Denk
• [U-Boot] [PATCH v3 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v3 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Stefano Babic
• [U-Boot] [PATCH v3 1/4] mmc: Change board_mmc_getcd() function prototype.   Thierry Reding
• [U-Boot] [PATCH V3 1/5] i.mx: introduce the armv7/imx-common folder   Fabio Estevam
• [U-Boot] [PATCH V3 1/5] i.mx: introduce the armv7/imx-common folder   Jason Hui
• [U-Boot] [PATCH v3 1/6] Create reloc.h and include it where needed   Simon Glass
• [U-Boot] [PATCH v3 1/6] x86: Import code from coreboot's libpayload to parse the coreboot table   Gabe Black
• [U-Boot] [PATCH v3 1/6] x86: Import code from coreboot's libpayload to parse the coreboot table   Graeme Russ
• [U-Boot] [PATCH v3 10/16] tegra: usb: fdt: Add USB definitions for Tegra2 Seaboard   Simon Glass
• [U-Boot] [PATCH v3 11/15] sf: Add spi_boot() to allow booting from SPI flash in an SPL   Christian Riesch
• [U-Boot] [PATCH v3 11/16] usb: Add support for txfifo threshold   Simon Glass
• [U-Boot] [PATCH v3 11/16] usb: Add support for txfifo threshold   Remy Bohmer
• [U-Boot] [PATCH v3 12/15] arm, davinci: Add SPL support for DA850 SoCs   Heiko Schocher
• [U-Boot] [PATCH v3 12/16] tegra: usb: Add support for Tegra USB peripheral   Simon Glass
• [U-Boot] [PATCH v3 13/15] arm, da850evm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH v3 13/15] arm, da850evm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH v3 13/15] arm, da850evm: Add an SPL for SPI boot   Tom Rini
• [U-Boot] [PATCH v3 13/15] arm, da850evm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH v3 13/15] arm, da850evm: Add an SPL for SPI boot   Tom Rini
• [U-Boot] [PATCH v3 13/16] tegra: usb: Add USB support to nvidia boards   Simon Glass
• [U-Boot] [PATCH v3 14/15] mkimage: Fix variable length header support   Stefano Babic
• [U-Boot] [PATCH v3 14/16] tegra: usb: Add common USB defines for tegra2 boards   Simon Glass
• [U-Boot] [PATCH v3 15/16] tegra: usb: Enable USB on Seaboard   Simon Glass
• [U-Boot] [PATCH v3 16/16] tegra: fdt: Enable FDT support for Seaboard   Simon Glass
• [U-Boot] [PATCH v3 2/2] Add a cli command to test the TPM device.   Wolfgang Denk
• [U-Boot] [PATCH v3 2/2] ARM: highbank: enable networking and pxe   Rob Herring
• [U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board   Stefano Babic
• [U-Boot] [PATCH V3 2/2] ext4fs write support   uma.shankar at samsung.com
• [U-Boot] [PATCH v3 2/3] mx28: Let dram_init be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v3 2/4] mmc: Implement card detection.   Thierry Reding
• [U-Boot] [PATCH V3 2/5] i.mx: add the initial support for freescale i.MX6Q processor   Fabio Estevam
• [U-Boot] [PATCH V3 2/5] i.mx: add the initial support for freescale i.MX6Q processor   Jason Hui
• [U-Boot] [PATCH v3 2/6] define CONFIG_SYS_SKIP_RELOC for all archs   Simon Glass
• [U-Boot] [PATCH v3 2/6] x86: Clean up the x86 zimage code in preparation to extend it   Gabe Black
• [U-Boot] [PATCH v3 2/6] x86: Clean up the x86 zimage code in preparation to extend it   Graeme Russ
• [U-Boot] [PATCH v3 3/3] mx28evk: Add initial support for MX28EVK board   Marek Vasut
• [U-Boot] [PATCH v3 3/3] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v3 3/3] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v3 3/3] usb:gadget:s5p Enable the USB Gadget framework at Exynos4210 (C210 Universal)   Lukasz Majewski
• [U-Boot] [PATCH v3 3/3] usb:gadget:s5p Enable the USB Gadget framework at Exynos4210 (C210 Universal)   Remy Bohmer
• [U-Boot] [PATCH v3 3/3] usb:gadget:s5p Enable the USB Gadget framework at Exynos4210 (C210 Universal)   Minkyu Kang
• [U-Boot] [PATCH v3 3/4] mmc: fsl_esdhc: Implement card-detect hook.   Thierry Reding
• [U-Boot] [PATCH v3 3/6] Add generic relocation feature   Simon Glass
• [U-Boot] [PATCH v3 3/6] x86: Add support for booting Linux using the 32 bit boot protocol   Gabe Black
• [U-Boot] [PATCH v3 3/6] x86: Add support for booting Linux using the 32 bit boot protocol   Graeme Russ
• [U-Boot] [PATCH v3 4/4] mmc: tegra2: Implement card-detect hook.   Thierry Reding
• [U-Boot] [PATCH v3 4/6] arm: Add processor function library   Simon Glass
• [U-Boot] [PATCH v3 4/6] x86: Add infrastructure to extract an e820 table from the coreboot tables   Gabe Black
• [U-Boot] [PATCH v3 4/6] x86: Add infrastructure to extract an e820 table from the coreboot tables   Graeme Russ
• [U-Boot] [PATCH v3 5/6] arm: Move over to generic relocation   Simon Glass
• [U-Boot] [PATCH v3 5/6] x86: Refactor the zboot innards so they can be reused with a vboot image   Gabe Black
• [U-Boot] [PATCH v3 5/6] x86: Refactor the zboot innards so they can be reused with a vboot image   Graeme Russ
• [U-Boot] [PATCH v3 6/6] arm: Remove unused code in start.S   Simon Glass
• [U-Boot] [PATCH v3 6/6] x86: Add support for specifying an initrd with the zboot command   Gabe Black
• [U-Boot] [PATCH v3 6/6] x86: Add support for specifying an initrd with the zboot command   Graeme Russ
• [U-Boot] [PATCH V3] 5PC2XX: Rename S5pc2XX to exynos   Chander Kashyap
• [U-Boot] [PATCH V3] 5PC2XX: Rename S5pc2XX to exynos   Minkyu Kang
• [U-Boot] [PATCH v3] Add a CBFS driver and commands to u-boot   Gabe Black
• [U-Boot] [PATCH v3] Add a CBFS driver and commands to u-boot   Wolfgang Denk
• [U-Boot] [PATCH v3] Add a CBFS driver and commands to u-boot   Gabe Black
• [U-Boot] [PATCH v3] Add a CBFS driver and commands to u-boot   Wolfgang Denk
• [U-Boot] [PATCH V3] ARM: fix s3c2410 timer code   David Müller
• [U-Boot] [PATCH v3] AT91: pio: Add PIO3 features   Remy Bohmer
• [U-Boot] [PATCH v3] AVR32: fix timer_init() function   Anatolij Gustschin
• [U-Boot] [PATCH v3] AVR32: fix timer_init() function   Wolfgang Denk
• [U-Boot] [PATCH v3] cmd_fat: add FAT write command   Donggeun Kim
• [U-Boot] [PATCH v3] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH v3] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Stefano Babic
• [U-Boot] [PATCH v3] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH v3] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Liu Hui-R64343
• [U-Boot] [PATCH v3] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Eric Nelson
• [U-Boot] [PATCH v3] MIPS: fix endianess handling   Daniel Schwierzeck
• [U-Boot] [PATCH v3] MIPS: fix endianess handling   Mike Frysinger
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Tom Rini
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Wolfgang Denk
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Tom Rini
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Scott Wood
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Scott Wood
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   stefano babic
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Scott Wood
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Tom Rini
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Tom Rini
• [U-Boot] [PATCH V3] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH v3] nds32: add header of amic multicore interrupt controller.   Macpaul Lin
• [U-Boot] [PATCH v3] tools/setlocalversion: Update from the Linux Kernel   Mike Frysinger
• [U-Boot] [PATCH v3] tools/setlocalversion: Update from the Linux Kernel   Wolfgang Denk
• [U-Boot] [PATCH v3] tools/setlocalversion: Update from the Linux Kernel   Kyle Moffett
• [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900)   Pali Rohár
• [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900)   Wolfgang Denk
• [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900)   Pali Rohár
• [U-Boot] [PATCH v3] U-Boot on Nokia RX-51 (aka N900)   Graeme Russ
• [U-Boot] [PATCH v3] video: cfb_console: Make the software cursor non-destructive   Anatolij Gustschin
• [U-Boot] [PATCH v3] video: cfb_console: Make the software cursor non-destructive   Anatolij Gustschin
• [U-Boot] [PATCH V4 0/2] Support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH v4 0/6] Add an SPL to boot the da850evm from SPI   Christian Riesch
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Ilya Yanok
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Ilya Yanok
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Govindraj
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Igor Grinberg
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Govindraj
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Igor Grinberg
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Govindraj
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Igor Grinberg
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Govindraj
• [U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3   Ilya Yanok
• [U-Boot] [PATCH v4 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v4 1/5] arm, davinci: move davinci_rtc struct to hardware.h   Christian Riesch
• [U-Boot] [PATCH v4 1/6] spl: display_options.o is required for SPI flash support in SPL   Christian Riesch
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Tom Rini
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Tom Rini
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Tom Rini
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Tom Rini
• [U-Boot] [PATCH V4 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH v4 2/3] mx28: Let dram_init be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v4 2/6] sf: Add spi_boot() to allow booting from SPI flash in an SPL   Mike Frysinger
• [U-Boot] [PATCH v4 2/6] sf: Add spi_boot() to allow booting from SPI flash in an SPL   Christian Riesch
• [U-Boot] [PATCH v4 3/3] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v4 3/6] arm, davinci: Add SPL support for DA850 SoCs   Tom Rini
• [U-Boot] [PATCH v4 3/6] arm, davinci: Add SPL support for DA850 SoCs   Christian Riesch
• [U-Boot] [PATCH v4 4/6] arm, da850evm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH v4 4/6] arm, da850evm: Add an SPL for SPI boot   Tom Rini
• [U-Boot] [PATCH v4 5/6] mkimage: Fix variable length header support   Christian Riesch
• [U-Boot] [PATCH v4 6/6] arm, davinci: Add support for generating AIS images to the Makefile   Christian Riesch
• [U-Boot] [PATCH v4 6/6] arm, davinci: Add support for generating AIS images to the Makefile   Mike Frysinger
• [U-Boot] [PATCH v4 6/6] arm, davinci: Add support for generating AIS images to the Makefile   Mike Frysinger
• [U-Boot] [PATCH v4 6/6] arm, davinci: Add support for generating AIS images to the Makefile   Christian Riesch
• [U-Boot] [PATCH v4] Add board_pre_console_putc to deal with early console output   Stefano Babic
• [U-Boot] [PATCH v4] Add board_pre_console_putc to deal with early console output   Simon Glass
• [U-Boot] [PATCH v4] Add board_pre_console_putc to deal with early console output   Stefano Babic
• [U-Boot] [PATCH v4] Add board_pre_console_putc to deal with early console output   Simon Glass
• [U-Boot] [PATCH v4] Add board_pre_console_putc to deal with early console output   Graeme Russ
• [U-Boot] [PATCH v4] Add board_pre_console_putc to deal with early console output   Simon Glass
• [U-Boot] [PATCH v4] Add board_pre_console_putc to deal with early console output   Graeme Russ
• [U-Boot] [PATCH v4] Add board_pre_console_putc to deal with early console output   Simon Glass
• [U-Boot] [PATCH V4] arm: Add Prep subcommand support to bootm   Simon Schwarz
• [U-Boot] [PATCH v4] ARMV7: Add support For Logic OMAP35x/DM37x modules   Peter Barada
• [U-Boot] [PATCH v4] ARMV7: Add support For Logic OMAP35x/DM37x modules   Igor Grinberg
• [U-Boot] [PATCH v4] ARMV7: Add support For Logic OMAP35x/DM37x modules   Peter Barada
• [U-Boot] [PATCH V4] Ethernut 5 board support   Wolfgang Denk
• [U-Boot] [PATCH V4] Ethernut 5 board support   Albert ARIBAUD
• [U-Boot] [PATCH v4] ftsdc010: improve performance and capability   Andy Fleming
• [U-Boot] [PATCH v4] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH v4] mmc: add host_caps checking avoid switch card improperly   Andy Fleming
• [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack   Tom Rini
• [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack   Simon Schwarz
• [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH V4] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH v4] pci_ftpci100: Implementation FTPCI100 PCI driver   Wolfgang Denk
• [U-Boot] [PATCH V4] sandbox: Add improved RAM simulation   Mike Frysinger
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Christian Riesch
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Tom Rini
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Tom Rini
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Christian Riesch
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Tom Rini
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Christian Riesch
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Tom Rini
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Tom Rini
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Christian Riesch
• [U-Boot] [PATCH v5 0/6] Add an SPL to boot the da850evm from SPI   Christian Riesch
• [U-Boot] [PATCH v5 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v5 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v5 1/6] spl: display_options.o is required for SPI flash support in SPL   Christian Riesch
• [U-Boot] [PATCH V5 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH v5 2/3] mx28: Let dram_init be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v5 2/3] mx28: Let dram_init be common for mx28   Stefano Babic
• [U-Boot] [PATCH v5 2/6] sf: Add spi_boot() to allow booting from SPI flash in an SPL   Mike Frysinger
• [U-Boot] [PATCH v5 2/6] sf: Add spi_boot() to allow booting from SPI flash in an SPL   Mike Frysinger
• [U-Boot] [PATCH v5 2/6] sf: Add spi_boot() to allow booting from SPI flash in an SPL   Christian Riesch
• [U-Boot] [PATCH v5 2/6] sf: Add spi_boot() to allow booting from SPI flash in an SPL   Scott Wood
• [U-Boot] [PATCH v5 2/6] sf: Add spi_boot() to allow booting from SPI flash in an SPL   Tom Rini
• [U-Boot] [PATCH v5 3/3] mx28evk: Add initial support for MX28EVK board   Stefano Babic
• [U-Boot] [PATCH v5 3/3] mx28evk: Add initial support for MX28EVK board   Marek Vasut
• [U-Boot] [PATCH v5 3/3] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v5 3/3] mx28evk: Add initial support for MX28EVK board   Marek Vasut
• [U-Boot] [PATCH v5 3/3] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v5 3/3] mx28evk: Add initial support for MX28EVK board   Veli-Pekka Peltola
• [U-Boot] [PATCH v5 3/3] mx28evk: Add initial support for MX28EVK board   Veli-Pekka Peltola
• [U-Boot] [PATCH v5 3/6] arm, davinci: Add SPL support for DA850 SoCs   Christian Riesch
• [U-Boot] [PATCH v5 4/6] arm, da850evm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH v5 4/6] arm, da850evm: Add an SPL for SPI boot   Tom Rini
• [U-Boot] [PATCH v5 5/6] mkimage: Fix variable length header support   Christian Riesch
• [U-Boot] [PATCH v5 6/6] arm, davinci: Add support for generating AIS images to the Makefile   Christian Riesch
• [U-Boot] [PATCH v5] arm: Fix clear bss loop for zero length bss   Christian Riesch
• [U-Boot] [PATCH v5] ARMV7: Add support For Logic OMAP35x/DM37x modules   Peter Barada
• [U-Boot] [PATCH v5] ARMV7: Add support For Logic OMAP35x/DM37x modules   Igor Grinberg
• [U-Boot] [PATCH V5] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH V5] nand_spl_simple: store ecc data on the stack   Scott Wood
• [U-Boot] [PATCH v5] ppc4xx: Add Io64 board support   Stefan Roese
• [U-Boot] [PATCH v6 0/4] Buffer overruns in printf   Simon Glass
• [U-Boot] [PATCH v6 0/4] Buffer overruns in printf   Wolfgang Denk
• [U-Boot] [PATCH v6 0/6] Add an SPL to boot the da850evm from SPI   Christian Riesch
• [U-Boot] [PATCH v6 0/6] Add an SPL to boot the da850evm from SPI   Tom Rini
• [U-Boot] [PATCH v6 1/2] Introduce generic TPM support in u-boot   Simon Glass
• [U-Boot] [PATCH v6 1/2] Introduce generic TPM support in u-boot   Wolfgang Denk
• [U-Boot] [PATCH v6 1/4] Move vsprintf functions into their own header   Wolfgang Denk
• [U-Boot] [PATCH v6 1/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v6 1/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v6 1/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v6 1/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Veli-Pekka Peltola
• [U-Boot] [PATCH v6 1/6] spl: display_options.o is required for SPI flash support in SPL   Christian Riesch
• [U-Boot] [PATCH V6 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH V6 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH V6 2/2] mcx: support for HTKW mcx board   Tom Rini
• [U-Boot] [PATCH V6 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH V6 2/2] mcx: support for HTKW mcx board   Anatolij Gustschin
• [U-Boot] [PATCH V6 2/2] mcx: support for HTKW mcx board   Ilya Yanok
• [U-Boot] [PATCH v6 2/4] Add safe vsnprintf and snprintf library functions   Wolfgang Denk
• [U-Boot] [PATCH v6 2/4] mx28: Allow to set MAC address for the two FECs   Marek Vasut
• [U-Boot] [PATCH v6 2/4] mx28: Allow to set MAC address for the two FECs   Stefano Babic
• [U-Boot] [PATCH v6 2/4] mx28: Allow to set MAC address for the two FECs   Fabio Estevam
• [U-Boot] [PATCH v6 2/6] sf: Add spi_boot() to allow booting from SPI flash in an SPL   Christian Riesch
• [U-Boot] [PATCH v6 3/4] mx28: Let dram_init be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v6 3/4] mx28: Let dram_init be common for mx28   Marek Vasut
• [U-Boot] [PATCH v6 3/4] vsprintf: Move function documentation into header file   Wolfgang Denk
• [U-Boot] [PATCH v6 3/6] arm, davinci: Add SPL support for DA850 SoCs   Christian Riesch
• [U-Boot] [PATCH v6 4/4] Make printf and vprintf safe from buffer overruns   Wolfgang Denk
• [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board   Marek Vasut
• [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board   Stefano Babic
• [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board   Stefano Babic
• [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board   Stefano Babic
• [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH v6 4/6] arm, da850evm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH v6 4/6] arm, da850evm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH v6 4/6] arm, da850evm: Add an SPL for SPI boot   Tom Rini
• [U-Boot] [PATCH v6 4/6] arm, da850evm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH v6 4/6] arm, da850evm: Add an SPL for SPI boot   Tom Rini
• [U-Boot] [PATCH v6 4/6] arm, da850evm: Add an SPL for SPI boot   Christian Riesch
• [U-Boot] [PATCH v6 4/6] arm, da850evm: Add an SPL for SPI boot   Tom Rini
• [U-Boot] [PATCH v6 5/6] mkimage: Fix variable length header support   Christian Riesch
• [U-Boot] [PATCH v6 6/6] arm, davinci: Add support for generating AIS images to the Makefile   Christian Riesch
• [U-Boot] [PATCH v6] arm, arm926ejs: Fix clear bss loop for zero length bss   Christian Riesch
• [U-Boot] [PATCH v6] arm, arm926ejs: Fix clear bss loop for zero length bss   Albert ARIBAUD
• [U-Boot] [PATCH v6] net: ll_temac: Add LL TEMAC driver to u-boot   Ricardo Ribalda Delgado
• [U-Boot] [PATCH v6] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
• [U-Boot] [PATCH v6] net: ll_temac: Add LL TEMAC driver to u-boot   Ricardo Ribalda Delgado
• [U-Boot] [PATCH v6] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
• [U-Boot] [PATCH v6] net: ll_temac: Add LL TEMAC driver to u-boot   Wolfgang Denk
• [U-Boot] [PATCH v6] ulpi: add generic ULPI functionality   Igor Grinberg
• [U-Boot] [PATCH v6] x86: Initial commit for running as a coreboot payload   Graeme Russ
• [U-Boot] [PATCH V7 0/5] SPL Linux boot   Stefano Babic
• [U-Boot] [PATCH v7 1/4] net: imx: Add multi-FEC support for imx_get_mac_from_fuse   Fabio Estevam
• [U-Boot] [PATCH v7 1/4] net: imx: Add multi-FEC support for imx_get_mac_from_fuse   Stefano Babic
• [U-Boot] [PATCH v7 2/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v7 2/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v7 2/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Stefano Babic
• [U-Boot] [PATCH V7 2/5] omap-common: Add NAND SPL linux booting   Tom Rini
• [U-Boot] [PATCH v7 3/4] mx28: Let dram_init be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v7 3/4] mx28: Let dram_init be common for mx28   Stefano Babic
• [U-Boot] [PATCH V7 3/5] omap-common/spl: Add linux boot to SPL   Tom Rini
• [U-Boot] [PATCH V7 3/5] omap-common/spl: Add linux boot to SPL   Wolfgang Denk
• [U-Boot] [PATCH v7 4/4] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH V7 4/5] devkit8000/spl: init GPMC for dm9000 in SPL   Tom Rini
• [U-Boot] [PATCH V7 5/5] omap-common: fixes BSS overwriting problem   Stefano Babic
• [U-Boot] [PATCH V7 5/5] omap-common: fixes BSS overwriting problem   Simon Schwarz
• [U-Boot] [PATCH V7 5/5] omap-common: fixes BSS overwriting problem   Simon Schwarz
• [U-Boot] [PATCH V7 5/5] omap-common: fixes BSS overwriting problem   Stefano Babic
• [U-Boot] [PATCH V7 5/5] omap-common: fixes BSS overwriting problem   Wolfgang Denk
• [U-Boot] [PATCH V7 5/5] omap-common: fixes BSS overwriting problem   Scott Wood
• [U-Boot] [PATCH v7] Add generic ULPI layer   Igor Grinberg
• [U-Boot] [PATCH v7] Add generic ULPI layer   Marek Vasut
• [U-Boot] [PATCH v7] Add generic ULPI layer   Igor Grinberg
• [U-Boot] [PATCH v7] Add generic ULPI layer   Igor Grinberg
• [U-Boot] [PATCH v7] Add generic ULPI layer   Marek Vasut
• [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
• [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Wolfgang Denk
• [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Stephan Linz
• [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Michal Simek
• [U-Boot] [PATCH v7] net: ll_temac: Add LL TEMAC driver to u-boot   Andy Fleming
• [U-Boot] [PATCH v7] USB: Add generic ULPI layer and a viewport   Igor Grinberg
• [U-Boot] [PATCH v7] USB: Add generic ULPI layer and a viewport   Marek Vasut
• [U-Boot] [PATCH v7] USB: Add generic ULPI layer and a viewport   Simon Glass
• [U-Boot] [PATCH v7] USB: Add generic ULPI layer and a viewport   Igor Grinberg
• [U-Boot] [PATCH v7] USB: Add generic ULPI layer and a viewport   Marek Vasut
• [U-Boot] [PATCH v7] USB: Add generic ULPI layer and a viewport   Igor Grinberg
• [U-Boot] [PATCH v7] USB: Add generic ULPI layer and a viewport   Marek Vasut
• [U-Boot] [PATCH v7] USB: Add generic ULPI layer and a viewport   Igor Grinberg
• [U-Boot] [PATCH V8 0/5] SPL Linux boot   Simon Schwarz
• [U-Boot] [PATCH V8 1/5] Add cmd_spl command   Simon Schwarz
• [U-Boot] [PATCH v8 2/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Marek Vasut
• [U-Boot] [PATCH v8 2/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Fabio Estevam
• [U-Boot] [PATCH v8 2/4] mx28: Let imx_get_mac_from_fuse be common for mx28   Stefano Babic
• [U-Boot] [PATCH V8 2/5] omap-common: Add NAND SPL linux booting   Simon Schwarz
• [U-Boot] [PATCH V8 3/5] devkit8000/spl: init GPMC for dm9000 in SPL   Simon Schwarz
• [U-Boot] [PATCH V8 4/5] omap-common: fixes BSS overwriting problem   Simon Schwarz
• [U-Boot] [PATCH V8 5/5] omap-common/spl: Add linux boot to SPL   Simon Schwarz
• [U-Boot] [PATCH V9 0/4] SPL Linux boot   Simon Schwarz
• [U-Boot] [PATCH V9 0/4] SPL Linux boot   Tom Rini
• [U-Boot] [PATCH V9 0/4] SPL Linux boot   Stefano Babic
• [U-Boot] [PATCH V9 0/4] SPL Linux boot   Stefano Babic
• [U-Boot] [PATCH V9 0/4] SPL Linux boot   Simon Schwarz
• [U-Boot] [PATCH V9 0/4] SPL Linux boot   Mike Frysinger
• [U-Boot] [PATCH V9 1/4] Add cmd_spl command   Simon Schwarz
• [U-Boot] [PATCH V9 1/4] Add cmd_spl command   Mike Frysinger
• [U-Boot] [PATCH V9 1/4] Add cmd_spl command   Simon Schwarz
• [U-Boot] [PATCH v9 1/4] gpio: Modify common gpio.h to more closely match Linux   Kim Phillips
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Simon Schwarz
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Stefano Babic
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Simon Schwarz
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Stefano Babic
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Wolfgang Denk
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Tom Rini
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Stefano Babic
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Mike Frysinger
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Stefano Babic
• [U-Boot] [PATCH V9 2/4] omap-common: Add NAND SPL linux booting   Mike Frysinger
• [U-Boot] [PATCH V9 3/4] devkit8000/spl: init GPMC for dm9000 in SPL   Tom Rini
• [U-Boot] [PATCH V9 3/4] devkit8000/spl: init GPMC for dm9000 in SPL   Simon Schwarz
• [U-Boot] [PATCH V9 4/4] omap-common/spl: Add linux boot to SPL   Simon Schwarz
• [U-Boot] [PATCH V9 4/4] omap-common/spl: Add linux boot to SPL   Mike Frysinger
• [U-Boot] [PATCH V9 4/4] omap-common/spl: Add linux boot to SPL   Tom Rini
• [U-Boot] [PATCH V9 4/4] omap-common/spl: Add linux boot to SPL   Mike Frysinger
• [U-Boot] [PATCH, v3] Print program basename instead of whole path in usage()   Horst Kronstorfer
• [U-Boot] [PATCH, v3] Print program basename instead of whole path in usage()   Wolfgang Denk
• [U-Boot] [PATCH/RFC] fix several printf() modifiers   Andreas Bießmann
• [U-Boot] [PATCH/RFC] fix several printf() modifiers   Thomas Chou
• [U-Boot] [PATCH/RFC] fix several printf() modifiers   Graeme Russ
• [U-Boot] [PATCH/RFC] fix several printf() modifiers   Mike Frysinger
• [U-Boot] [PATCH/RFC] fix several printf() modifiers   Mike Frysinger
• [U-Boot] [PATCH/RFC] fix several printf() modifiers   Andreas Bießmann
• [U-Boot] [PATCH/RFC] fix several printf() modifiers   Mike Frysinger
• [U-Boot] [PATCH/RFC] gen_atmel_mci: add mci_set_data_timeout()   Andreas Bießmann
• [U-Boot] [PATCH] [PCI] Update pci_ids.h from current Linux sources   Anatolij Gustschin
• [U-Boot] [PATCH] [PCI] Update pci_ids.h from current Linux sources   Anatolij Gustschin
• [U-Boot] [PATCH] [PCI] Update pci_ids.h from current Linux sources   Anatolij Gustschin
• [U-Boot] [PATCH] [trivial] common.h: remove value from bool defines   Igor Grinberg
• [U-Boot] [PATCH] [trivial] env: remove value from boolean defines   Marek Vasut
• [U-Boot] [PATCH] [trivial] env: remove value from boolean defines   Igor Grinberg
• [U-Boot] [PATCH] [trivial] env: remove value from boolean defines   Marek Vasut
• [U-Boot] [PATCH] [trivial] env: remove value from boolean defines   Igor Grinberg
• [U-Boot] [PATCH] [trivial] env: remove value from boolean defines   Marek Vasut
• [U-Boot] [PATCH] [trivial] env: remove value from boolean defines   Igor Grinberg
• [U-Boot] [PATCH] Add a CBFS driver and commands to u-boot   Gabe Black
• [U-Boot] [PATCH] Add a CBFS driver and commands to u-boot   Wolfgang Denk
• [U-Boot] [PATCH] Add a CBFS driver and commands to u-boot   Gabe Black
• [U-Boot] [PATCH] Add a CBFS driver and commands to u-boot   Gabe Black
• [U-Boot] [PATCH] add initial support for bluegiga apx4devkit   Veli-Pekka Peltola
• [U-Boot] [PATCH] add initial support for bluegiga apx4devkit   Fabio Estevam
• [U-Boot] [PATCH] add initial support for bluegiga apx4devkit   Stefano Babic
• [U-Boot] [PATCH] add initial support for bluegiga apx4devkit   Veli-Pekka Peltola
• [U-Boot] [PATCH] add initial support for bluegiga apx4devkit   Stefano Babic
• [U-Boot] [PATCH] add initial support for bluegiga apx4devkit   Veli-Pekka Peltola
• [U-Boot] [PATCH] add missing space   Luka Perkov
• [U-Boot] [PATCH] add missing space   Anatolij Gustschin
• [U-Boot] [PATCH] add missing space   Mike Frysinger
• [U-Boot] [PATCH] add missing space   Luka Perkov
• [U-Boot] [PATCH] add missing space   Mike Frysinger
• [U-Boot] [PATCH] add missing space   Wolfgang Denk
• [U-Boot] [PATCH] add print_cpuinfo to s3c24x0   Albert ARIBAUD
• [PATCH] Add support for MMC to fw_printenv/setenv   Christian Daudt
• [U-Boot] [PATCH] Allow the "reset" command to be omitted with CONFIG_CMD_RESET   Kyle Moffett
• [U-Boot] [PATCH] Allow the "reset" command to be omitted with CONFIG_CMD_RESET   Mike Frysinger
• [U-Boot] [PATCH] Allow the "reset" command to be omitted with CONFIG_CMD_RESET   Mike Frysinger
• [U-Boot] [PATCH] Allow the "reset" command to be omitted with CONFIG_CMD_RESET   Mike Frysinger
• [U-Boot] [PATCH] Allow the "reset" command to be omitted with CONFIG_CMD_RESET   Moffett, Kyle D
• [U-Boot] [PATCH] Allow the "reset" command to be omitted with CONFIG_CMD_RESET   Moffett, Kyle D
• [U-Boot] [PATCH] Append board name to version identifier   Ed Swarthout
• [U-Boot] [PATCH] Append board name to version identifier   Wolfgang Denk
• [U-Boot] [PATCH] Append board name to version identifier   Igor Grinberg
• [U-Boot] [PATCH] Append board name to version identifier   Mike Frysinger
• [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
• [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Marek Vasut
• [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
• [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
• [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Marek Vasut
• [U-Boot] [PATCH] arm, davinci: Change byte order of RTC kick register values   Christian Riesch
• [U-Boot] [PATCH] arm, davinci: Fix build warnings for cam_enc_4xx   Tom Rini
• [U-Boot] [PATCH] arm, davinci: Fix build warnings for cam_enc_4xx   Heiko Schocher
• [U-Boot] [PATCH] arm, davinci: Fix build warnings for cam_enc_4xx   Tom Rini
• [U-Boot] [PATCH] arm, davinci: Use a common configuration file for da850evm and da850_am18xxevm   Christian Riesch
• [U-Boot] [PATCH] arm, fdt: update ethernet mac address before booting Linux   Heiko Schocher
• [U-Boot] [PATCH] arm, fdt: update ethernet mac address before booting Linux   Wolfgang Denk
• [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
• [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Albert ARIBAUD
• [U-Boot] [PATCH] arm, arm-kirkwood: disable l2c before linux boot   Michael Walle
• [U-Boot] [PATCH] arm, davinci: Fix build warnings for cam_enc_4xx   Christian Riesch
• [U-Boot] [PATCH] arm, fdt: update ethernet mac address before booting Linux   Jerry Van Baren
• [U-Boot] [PATCH] arm, fdt: update ethernet mac address before booting Linux   Albert ARIBAUD
• [U-Boot] [PATCH] arm/omap3: limit chip select iteration based on board config   Grant Erickson
• [U-Boot] [PATCH] arm926ejs: remove noop flush_dcache_all function   Matthias Weißer
• [U-Boot] [PATCH] arm926ejs: remove noop flush_dcache_all function   Tom Rini
• [U-Boot] [PATCH] arm926ejs: remove noop flush_dcache_all function   Ilya Yanok
• [U-Boot] [PATCH] ARM: activate DISPLAY_CPUINFO for VCMA9 + SMDK2410 board   David Müller
• [U-Boot] [PATCH] arm: add __aeabi_unwind_cpp_pr1() function to avoid linker complaints   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Tegra: Fix Harmony and Ventana builds   Tom Warren
• [U-Boot] [PATCH] arm: Tegra: Fix Harmony and Ventana builds   Stephen Warren
• [U-Boot] [PATCH] arm: Tegra: Fix Harmony and Ventana builds   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Tegra: Fix Harmony and Ventana builds   Tom Warren
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Tom Warren
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Mike Frysinger
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Mike Frysinger
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Wolfgang Denk
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Wolfgang Denk
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Aneesh V
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Tom Warren
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Aneesh V
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Tom Warren
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Simon Glass
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Aneesh V
• [U-Boot] [PATCH] arm: Tegra: fix undefined instruction hang immediately after reset   Tom Warren
• [U-Boot] [PATCH] arm: Tidy up of PRAM init to use getenv_f()   Albert ARIBAUD
• [U-Boot] [PATCH] arm: Tidy up of PRAM init to use getenv_f()   Simon Glass
• [U-Boot] [PATCH] ARMV7: Add support For Logic OMAP35x/DM37x modules   Peter Barada
• [U-Boot] [PATCH] ARMV7: Add support For Logic OMAP35x/DM37x modules   Tom Rini
• [U-Boot] [PATCH] ARMV7: Add support For Logic OMAP35x/DM37x modules   Wolfgang Denk
• [U-Boot] [PATCH] ARMV7: Add support For Logic OMAP35x/DM37x modules   Igor Grinberg
• [U-Boot] [PATCH] ARMV7: Add support For Logic OMAP35x/DM37x modules   Peter Barada
• [U-Boot] [PATCH] avoid flash writes for new keys, with no values with fw_setenv   Sridhar Addagada
• [U-Boot] [PATCH] board/eltec/elppc/misc.c: Fix GCC 4.6 build warning   Mike Frysinger
• [U-Boot] [PATCH] board/eltec/elppc/misc.c: Fix GCC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH] board/eltec/elppc/misc.c: Fix GCC 4.6 build warning   Anatolij Gustschin
• [U-Boot] [PATCH] board/esd/cpci405/cpci405.c: Fix GCC 4.6 warning   Wolfgang Denk
• [U-Boot] [PATCH] board/esd/cpci750/mv_eth.c: Fix GCC 4.6 build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] board/esd/cpci750/mv_eth.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH] board/mpl/common/isa.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH] board/mpl/common/isa.c: Fix GCC 4.6 build warnings   David Müller
• [U-Boot] [PATCH] board/samsung/universal_c210/universal.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH] board/samsung/universal_c210/universal.c: Fix build warning   Lukasz Majewski
• [U-Boot] [PATCH] board/samsung/universal_c210/universal.c: Fix build warning   Wolfgang Denk
• [U-Boot] [PATCH] board/samsung/universal_c210/universal.c: Fix build warning   Wolfgang Denk
• [U-Boot] [PATCH] board/samsung/universal_c210/universal.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH] board/samsung/universal_c210/universal.c: Fix build warning   Minkyu Kang
• [U-Boot] [PATCH] board/ti/omap2420h4/omap2420h4.c: Fix GC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH] board/ti/omap2420h4/omap2420h4.c: Fix GC 4.6 build warning   Tom Rini
• [U-Boot] [PATCH] board/ti/omap2420h4/omap2420h4.c: Fix GC 4.6 build warning   Wolfgang Denk
• [U-Boot] [PATCH] cmd_fat: add FAT write command   Donggeun Kim
• [U-Boot] [PATCH] cmd_fat: add FAT write command   Mike Frysinger
• [U-Boot] [PATCH] Coding Style cleanup   Wolfgang Denk
• [U-Boot] [PATCH] Coding Style cleanup   Premi, Sanjeev
• [U-Boot] [PATCH] Coding Style cleanup   Wolfgang Denk
• [U-Boot] [PATCH] Coding Style cleanup   Premi, Sanjeev
• [U-Boot] [PATCH] Coding Style cleanup   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_nvedit.c: Add missing 'env save' preproc guard   Horst Kronstorfer
• [U-Boot] [PATCH] common/cmd_nvedit.c: Add missing 'env save' preproc guard   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_nvedit.c: Fix size calculation in do_env_import()   Horst Kronstorfer
• [U-Boot] [PATCH] common/cmd_nvedit.c: Fix size calculation in do_env_import()   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_nvedit.c: Fix size calculation in do_env_import()   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_nvedit.c: Fix size calculation in do_env_import()   Wolfgang Denk
• [U-Boot] [PATCH] common/cmd_pxe.c: Fix GCC 4.6 build warnings   Heiko Schocher
• [U-Boot] [PATCH] common/cmd_pxe.c: Fix GCC 4.6 build warnings   Jason Hobbs
• [U-Boot] [PATCH] common/cmd_pxe.c: Fix GCC 4.6 build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] common/image.c: align usage of fdt_high with initrd_high   Shawn Guo
• [U-Boot] [PATCH] common/usb_kbd.c: fix bug introduced in commit 00b7d6e   Wolfgang Denk
• [U-Boot] [PATCH] common/usb_kbd.c: fix bug introduced in commit 00b7d6e   Wolfgang Denk
• [U-Boot] [PATCH] CPCI750: Do not enable data cache in start.S   Wolfgang Denk
• [U-Boot] [PATCH] CPCI750: Fix GCC 4.6 warning in board/esd/cpci750/mv_eth.c   Wolfgang Denk
• [U-Boot] [PATCH] da850_am18xxevm: Add CONFIG_SPI_FLASH_STMICRO to the board config   Christian Riesch
• [U-Boot] [PATCH] da850_am18xxevm: Add CONFIG_SPI_FLASH_STMICRO to the board config   Tom Rini
• [U-Boot] [PATCH] da850_am18xxevm: Add CONFIG_SPI_FLASH_STMICRO to the board config   Christian Riesch
• [U-Boot] [PATCH] da850evm: Remove CONFIG_SYS_xxCACHE_OFF defines   Christian Riesch
• [U-Boot] [PATCH] davinci: Fixed wrong timebase clock frequency.   Manfred Rudigier
• [U-Boot] [PATCH] davinci: Fixed wrong timebase clock frequency.   Tom Rini
• [U-Boot] [PATCH] davinci: Fixed wrong timebase clock frequency.   Heiko Schocher
• [U-Boot] [PATCH] devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss   Simon Schwarz
• [U-Boot] [PATCH] devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss   Igor Grinberg
• [U-Boot] [PATCH] devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss   Thomas Weber
• [U-Boot] [PATCH] devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss   Igor Grinberg
• [U-Boot] [PATCH] devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss   Aneesh V
• [U-Boot] [PATCH] devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss   Igor Grinberg
• [U-Boot] [PATCH] Devkit8000: Switch over to enable_gpmc_cs_config   Tom Rini
• [U-Boot] [PATCH] Devkit8000: Switch over to enable_gpmc_cs_config   Thomas Weber
• [U-Boot] [PATCH] Devkit8000: Switch over to enable_gpmc_cs_config   Tom Rini
• [U-Boot] [PATCH] Devkit8000: Switch over to enable_gpmc_cs_config   Thomas Weber
• [U-Boot] [PATCH] doc/mkimage.1: Fix -D/-f options formatting   Horst Kronstorfer
• [U-Boot] [PATCH] doc/mkimage.1: Fix -D/-f options formatting   Wolfgang Denk
• [U-Boot] [PATCH] doc/mkimage.1: Fix some typos   Horst Kronstorfer
• [U-Boot] [PATCH] doc/mkimage.1: Fix some typos   Mike Frysinger
• [U-Boot] [PATCH] doc/mkimage.1: Fix some typos   Wolfgang Denk
• [U-Boot] [PATCH] drivers/gpio/da8xx_gpio.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/gpio/da8xx_gpio.c: Fix build warning   Wolfgang Denk
• [U-Boot] [PATCH] drivers/mmc/mv_sdhci.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/mmc/mv_sdhci.c: Fix build warning   Lei Wen
• [U-Boot] [PATCH] drivers/mmc/mv_sdhci.c: Fix build warning   Andy Fleming
• [U-Boot] [PATCH] drivers/net/e1000.c: Fix GCC 4.6 build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/net/e1000.c: Fix GCC 4.6 build warnings   Moffett, Kyle D
• [U-Boot] [PATCH] drivers/net/e1000.c: Fix GCC 4.6 build warnings   Mike Frysinger
• [U-Boot] [PATCH] drivers/net/e1000.c: Fix GCC 4.6 build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/net/e1000_spi.c: Fix build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/net/e1000_spi.c: Fix build warnings   Moffett, Kyle D
• [U-Boot] [PATCH] drivers/net/e1000_spi.c: Fix build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] drivers/net/e1000_spi.c: Fix build warnings   Mike Frysinger
• [U-Boot] [PATCH] drivers/net/e1000_spi.c: Fix build warnings   Wolfgang Denk
• [U-Boot] [PATCH] drivers/net/mvgbe.c: Fix GCC 4.6 warnings   Wolfgang Denk
• [U-Boot] [PATCH] drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH] drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH] drivers/usb/gadget/pxa27x_udc.c: Coding Style cleanup   Wolfgang Denk
• [U-Boot] [PATCH] drivers/usb/gadget/pxa27x_udc.c: Coding Style cleanup   Wolfgang Denk
• [U-Boot] [PATCH] drivers/usb/host/ehci-mxc.c: Fix GCC 4.6 warning   Wolfgang Denk
• [PATCH] ehci-omap: Clean up added ehci-omap.c   Govindraj.R
• [U-Boot] [PATCH] ehci: speed up initialization   Vincent Palatin
• [U-Boot] [PATCH] ehci: speed up initialization   Remy Bohmer
• [U-Boot] [PATCH] ehci: speed up initialization   Wolfgang Grandegger
• [U-Boot] [PATCH] ehci: speed up initialization   Vincent Palatin
• [U-Boot] [PATCH] ehci: speed up initialization   Wolfgang Grandegger
• [U-Boot] [PATCH] ehci: speed up initialization   Wolfgang Denk
• [U-Boot] [PATCH] ehci: speed up initialization   Remy Bohmer
• [U-Boot] [PATCH] ehci: speed up initialization   Vincent Palatin
• [U-Boot] [PATCH] ehci: speed up initialization   Wolfgang Grandegger
• [U-Boot] [PATCH] env: factor out the env_get_char_spec() function   Igor Grinberg
• [U-Boot] [PATCH] env_nand: Remove DEBUG definition   Wolfgang Denk
• [U-Boot] [PATCH] ext2: Cache line align indirection buffers   Simon Glass
• [U-Boot] [PATCH] FAT: fix complie error when enabling FAT write   Donggeun Kim
• [U-Boot] [PATCH] FAT: fix complie error when enabling FAT write   Wolfgang Denk
• [U-Boot] [PATCH] FAT: fix some issues in FAT write support code   Anatolij Gustschin
• [U-Boot] [PATCH] FAT: fix some issues in FAT write support code   Donggeun Kim
• [U-Boot] [PATCH] FAT: fix some issues in FAT write support code   Wolfgang Denk
• [U-Boot] [PATCH] FAT: update the second FAT when writing a file   Donggeun Kim
• [U-Boot] [PATCH] Fix breakage after removing common.h from export.h   Stefano Babic
• [U-Boot] [PATCH] Fix breakage after removing common.h from export.h   Wolfgang Denk
• [U-Boot] [PATCH] Fix breakage after removing common.h from export.h   Stefano Babic
• [U-Boot] [PATCH] Fix breakage after removing common.h from export.h   Wolfgang Denk
• [U-Boot] [PATCH] Fix breakage after removing common.h from export.h   Stefano Babic
• [U-Boot] [PATCH] Fix breakage after removing common.h from export.h   Stefano Babic
• [U-Boot] [PATCH] Fix breakage after removing common.h from export.h   Stefano Babic
• [U-Boot] [PATCH] Fix building for mx51evk board   Anatolij Gustschin
• [U-Boot] [PATCH] Fix building for mx51evk board   Stefano Babic
• [U-Boot] [PATCH] Fix compilation warnings when building eNET   Vadim Bendebury
• [U-Boot] [PATCH] Fix compilation warnings when building eNET   Vadim Bendebury
• [U-Boot] [PATCH] Fix compilation warnings when building eNET   Graeme Russ
• [U-Boot] [PATCH] Fix compilation warnings when building eNET   Vadim Bendebury
• [U-Boot] [PATCH] Fix compilation warnings when building eNET   Graeme Russ
• [U-Boot] [PATCH] Fix compilation warnings when building eNET   Vadim Bendebury
• [U-Boot] [PATCH] Fix DP8381x driver to work with mips processors   Anatolij Gustschin
• [U-Boot] [PATCH] Fix logic for selection of CONFIG_SYS_DEF_EEPROM_ADDR   Kyle Moffett
• [U-Boot] [PATCH] fix s3c24x0 timer code   Albert ARIBAUD
• [U-Boot] [PATCH] Fix some bugs in the EFI support   Graeme Russ
• [U-Boot] [PATCH] Fix some bugs in the EFI support   Simon Glass
• [U-Boot] [PATCH] Fix some bugs in the EFI support   Anton Staaf
• [U-Boot] [PATCH] Fix some bugs in the EFI support   Anatolij Gustschin
• [U-Boot] [PATCH] Fix some bugs in the EFI support   Wolfgang Denk
• [U-Boot] [PATCH] Fix some bugs in the EFI support   Anton Staaf
• [U-Boot] [PATCH] Fix SPI build errors in exports.c   Simon Glass
• [U-Boot] [PATCH] Fix SPI build errors in exports.c   Wolfgang Denk
• [U-Boot] [PATCH] Fix tsize warning in tools/aisimage.c   Wolfgang Denk
• [U-Boot] [PATCH] fs/fat/fat.c: fix warning: 'part_size' defined but not used   Aaron Williams
• [U-Boot] [PATCH] fs/fat/fat.c: fix warning: 'part_size' defined but not used   Wolfgang Denk
• [U-Boot] [PATCH] fs/fat/fat.c: fix warning: 'part_size' defined but not used   Wolfgang Denk
• [U-Boot] [PATCH] fs/fat/fat.c: fix warning: 'part_size' defined but not used   Donggeun Kim
• [U-Boot] [PATCH] fs/fat/fat.c: fix warning: 'part_size' defined but not used   Anatolij Gustschin
• [U-Boot] [PATCH] fs/reiserfs/reiserfs.c: Fix compiler warning   Anatolij Gustschin
• [U-Boot] [PATCH] fs/reiserfs/reiserfs.c: Fix compiler warning   Wolfgang Denk
• [PATCH] fsl_esdhc: fix PIO mode transfers   Ira W. Snyder
• [U-Boot] [PATCH] fsl_esdhc: fix PIO mode transfers   Ira W. Snyder
• [U-Boot] [PATCH] fsl_lbc: add printout of LCRR and LBCR to local bus regs   Paul Gortmaker
• [U-Boot] [PATCH] ftintc010.h: add header of ftintc010 interrupt controller   Macpaul Lin
• [U-Boot] [PATCH] ftintc010.h: add header of ftintc010 interrupt controller   Wolfgang Denk
• [U-Boot] [PATCH] fw_env.c: use default env values if config file cannot be opened   Frans Meulenbroeks
• [U-Boot] [PATCH] fw_env.h: added a few missing defines   Frans Meulenbroeks
• [U-Boot] [PATCH] fw_env.h: added a few missing defines   Andreas Bießmann
• [U-Boot] [PATCH] fw_env.h: added a few missing defines   Frans Meulenbroeks
• [U-Boot] [PATCH] fw_env.h: added a few missing defines   Andreas Bießmann
• [U-Boot] [PATCH] git-mailrc: Add self to davinci/omap, add ti   Tom Rini
• [U-Boot] [PATCH] git-mailrc: Add self to davinci/omap, add ti   Mike Frysinger
• [U-Boot] [PATCH] git-mailrc: Add self to davinci/omap, add ti   Wolfgang Denk
• [U-Boot] [PATCH] i.mx6:imx6q: allign MAC address with burned-in ordering   Jason Liu
• [U-Boot] [PATCH] i.mx6:imx6q: allign MAC address with burned-in ordering   Jason Liu
• [U-Boot] [PATCH] i.mx6:imx6q: allign MAC address with burned-in ordering   Stefano Babic
• [U-Boot] [PATCH] i.mx6q: mx6qarm2: Enable the usboh3 clock   Dirk Behme
• [U-Boot] [PATCH] i.mx6q: mx6qarm2: Enable the usboh3 clock   Jason Liu
• [U-Boot] [PATCH] i.mx6q: mx6qarm2: Enable the usboh3 clock   Stefano Babic
• [U-Boot] [PATCH] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Jason Liu
• [U-Boot] [PATCH] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Fabio Estevam
• [U-Boot] [PATCH] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Fabio Estevam
• [U-Boot] [PATCH] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Stefano Babic
• [U-Boot] [PATCH] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Dirk Behme
• [U-Boot] [PATCH] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board   Fabio Estevam
• [U-Boot] [PATCH] imximage: Add support for NOR boot   Fabio Estevam
• [U-Boot] [PATCH] imximage: Add support for NOR boot   stefano babic
• [U-Boot] [PATCH] imximage: Add support for NOR boot   Wolfgang Denk
• [U-Boot] [PATCH] kirkwood: add support for D-Link DNS-325   Stefan Herbrechtsmeier
• [U-Boot] [PATCH] kirkwood: add support for D-Link DNS-325   Prafulla Wadaskar
• [U-Boot] [PATCH] kirkwood_spi: fix setting of irq mask   Michael Walle
• [U-Boot] [PATCH] kirkwood_spi: fix setting of irq mask   Michael Walle
• [U-Boot] [PATCH] kirkwood_spi: fix setting of irq mask   Prafulla Wadaskar
• [U-Boot] [PATCH] kirkwood_spi: small fixes   Michael Walle
• [U-Boot] [PATCH] km/common: add toolchain variable   Holger Brunck
• [U-Boot] [PATCH] km/common: add toolchain variable   Wolfgang Denk
• [U-Boot] [PATCH] km/common: add toolchain variable   Holger Brunck
• [U-Boot] [PATCH] km/common: add toolchain variable   Wolfgang Denk
• [U-Boot] [PATCH] km/common: add toolchain variable   Holger Brunck
• [U-Boot] [PATCH] km/common: add toolchain variable   Wolfgang Denk
• [U-Boot] [PATCH] km/common: add toolchain variable   Holger Brunck
• [U-Boot] [PATCH] km/common: add toolchain variable   Wolfgang Denk
• [U-Boot] [PATCH] km/common: add toolchain variable   Wolfgang Denk
• [U-Boot] [PATCH] lib/string: added strndup   Grant Erickson
• [U-Boot] [PATCH] lib/string: added strndup   Wolfgang Denk
• [U-Boot] [PATCH] lib/string: added strndup   Grant Erickson
• [U-Boot] [PATCH] M28: Cleanup memsize.o OOT build   Marek Vasut
• [U-Boot] [PATCH] M28: Cleanup memsize.o OOT build   Stefano Babic
• [U-Boot] [PATCH] M28: Cleanup memsize.o OOT build   Marek Vasut
• [U-Boot] [PATCH] M28: Cleanup memsize.o OOT build   Stefano Babic
• [U-Boot] [PATCH] M28: Fix tab indent in u-boot.bd   Marek Vasut
• [U-Boot] [PATCH] M28: Fix tab indent in u-boot.bd   Stefano Babic
• [U-Boot] [PATCH] m28evk: Use GENERATED_GBL_DATA_SIZE   Fabio Estevam
• [U-Boot] [PATCH] m28evk: Use GENERATED_GBL_DATA_SIZE   Marek Vasut
• [U-Boot] [PATCH] m28evk: Use GENERATED_GBL_DATA_SIZE   Fabio Estevam
• [U-Boot] [PATCH] m28evk: Use GENERATED_GBL_DATA_SIZE   Stefano Babic
• [U-Boot] [PATCH] m28evk: Use GENERATED_GBL_DATA_SIZE   Marek Vasut
• [U-Boot] [PATCH] m68k: fix ambiguous bit testing   Anatolij Gustschin
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Mike Frysinger
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Marek Vasut
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Mike Frysinger
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Marek Vasut
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Kumar Gala
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Marek Vasut
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Mike Frysinger
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Qinglin Ye
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Marek Vasut
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Wolfgang Denk
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Mike Frysinger
• [U-Boot] [PATCH] MAKEALL: Add -l option to only list build targets   Marek Vasut
• [U-Boot] [PATCH] Makefile: add tools/mkenvimage to target 'clean'   Anatolij Gustschin
• [U-Boot] [PATCH] Makefile: fix distclean and *_config rules to be less noise   Wolfgang Denk
• [U-Boot] [PATCH] Makefile: fix distclean and *_config rules to be less noise   Lauri Hintsala
• [U-Boot] [PATCH] matrix vision: fix MVBLM7, MVSMR build error   Wolfgang Denk
• [U-Boot] [PATCH] menu.c: use puts() instead of printf() where possible   Wolfgang Denk
• [U-Boot] [PATCH] mii: miiphy register address width change   Wolfgang Denk
• [U-Boot] [PATCH] miiphy: Note that miiphy_* API is deprecated   Wolfgang Denk
• [U-Boot] [PATCH] MIPS: fix endianess handling   Shinya Kuribayashi
• [U-Boot] [PATCH] MIPS: fix endianess handling   Wolfgang Denk
• [U-Boot] [PATCH] MIPS: fix endianess handling   Wolfgang Denk
• [U-Boot] [PATCH] MIPS: fix endianess handling   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: fix endianess handling   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: fix endianess handling   Wolfgang Denk
• [U-Boot] [PATCH] MIPS: remove broken "tb0229" board   Wolfgang Denk
• [U-Boot] [PATCH] MIPS: remove broken "tb0229" board   Wolfgang Denk
• [U-Boot] [PATCH] MIPS: tb0229: fix GCC 4.6 compile errors and warnings   Daniel Schwierzeck
• [U-Boot] [PATCH] MIPS: tb0229: fix GCC 4.6 compile errors and warnings   Wolfgang Denk
• [U-Boot] [PATCH] mpc5200: digsy_mtc: Fix extension board detection   Wolfgang Denk
• [U-Boot] [PATCH] mpc5200: digsy_mtc: Fix extension board detection   Anatolij Gustschin
• [U-Boot] [PATCH] mpc85xx: Add board support for the eXMeritus HWW-1U-1A devices   Kyle Moffett
• [U-Boot] [PATCH] mpc85xx: Add board support for the eXMeritus HWW-1U-1A devices   Kumar Gala
• [U-Boot] [PATCH] MPC85xxCDS: Fix missing LCRR_DBYP bits for 66-133MHz LBC   Paul Gortmaker
• [U-Boot] [PATCH] mpc8xxx: Fix "DRAM" message formatting   Kyle Moffett
• [U-Boot] [PATCH] mpc8xxx: Fix "DRAM" message formatting   Wolfgang Denk
• [U-Boot] [PATCH] mv_common.c: get rid of 'defined but not used' warning   Anatolij Gustschin
• [U-Boot] [PATCH] MX28: Fix MXSBOOT segfault if no params specified   Marek Vasut
• [U-Boot] [PATCH] mx28: remove omap specific config options   Veli-Pekka Peltola
• [U-Boot] [PATCH] mx28: remove omap specific config options   Fabio Estevam
• [U-Boot] [PATCH] mx28: remove omap specific config options   Stefano Babic
• [U-Boot] [PATCH] mx28: remove omap specific config options   Stefano Babic
• [U-Boot] [PATCH] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Add initial support for MX28EVK board   Marek Vasut
• [U-Boot] [PATCH] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Add initial support for MX28EVK board   Fabio Estevam
• [U-Boot] [PATCH] mx28evk: Add initial support for MX28EVK board   Stefano Babic
• [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Marek Vasut
• [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Veli-Pekka Peltola
• [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Marek Vasut
• [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Veli-Pekka Peltola
• [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Scott Wood
• [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Marek Vasut
• [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Scott Wood
• [U-Boot] [PATCH] MXS-NAND: Backport ecc.size from linux kernel   Marek Vasut
• [U-Boot] [PATCH] NAND: Allow nand_ids and nand_bbt to be compiled in SPL   Marek Vasut
• [U-Boot] [PATCH] NAND: Allow nand_scan to be replaced by user   Marek Vasut
• [U-Boot] [PATCH] NAND: Allow nand_scan to be replaced by user   Scott Wood
• [U-Boot] [PATCH] NAND: Allow nand_scan to be replaced by user   Marek Vasut
• [U-Boot] [PATCH] NAND: remove remaining NAND_MAX_CHIPS definitions   Vladimir Zapolskiy
• [U-Boot] [PATCH] NAND: remove remaining NAND_MAX_CHIPS definitions   Scott Wood
• [U-Boot] [PATCH] NAND: remove remaining NAND_MAX_CHIPS definitions   Vladimir Zapolskiy
• [U-Boot] [PATCH] NAND: remove remaining NAND_MAX_CHIPS definitions   Scott Wood
• [U-Boot] [PATCH] NAND: remove remaining NAND_MAX_CHIPS definitions   Vladimir Zapolskiy
• [U-Boot] [PATCH] nand_spl/nand_boot.c: Fix build warning   Anatolij Gustschin
• [U-Boot] [PATCH] nand_spl/nand_boot.c: Fix build warning   Scott Wood
• [U-Boot] [PATCH] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH] nand_spl_simple: store ecc data on the stack   Ilya Yanok
• [U-Boot] [PATCH] nand_spl_simple: store ecc data on the stack   Stefano Babic
• [U-Boot] [PATCH] nds32: add amic multicore interrupt controller support   Macpaul Lin
• [U-Boot] [PATCH] nds32: add amic multicore interrupt controller support   Marek Vasut
• [U-Boot] [PATCH] net/eth: Don't issue warnings for offboard ethernet chips   Kyle Moffett
• [U-Boot] [PATCH] net/eth: Don't issue warnings for offboard ethernet chips   Wolfgang Denk
• [U-Boot] [PATCH] net/eth: Don't issue warnings for offboard ethernet chips   Wolfgang Denk
• [U-Boot] [PATCH] net/eth: Don't issue warnings for offboard ethernet chips   Moffett, Kyle D
• [U-Boot] [PATCH] net: Fix arguments in tftpput command   Simon Glass
• [U-Boot] [PATCH] net: Fix arguments in tftpput command   Mike Frysinger
• [U-Boot] [PATCH] net: Fix arguments in tftpput command   Wolfgang Denk
• [U-Boot] [PATCH] net: Fix arguments in tftpput command   Simon Glass
• [U-Boot] [PATCH] net: Make sure IPaddr_t is 32 bits in size   Matthias Weisser
• [U-Boot] [PATCH] net: Make sure IPaddr_t is 32 bits in size   Mike Frysinger
• [U-Boot] [PATCH] net: Make sure IPaddr_t is 32 bits in size   Mike Frysinger
• [U-Boot] [PATCH] OMAP MMC: Add delay before waiting for status   Andreas Müller
• [U-Boot] [PATCH] OMAP3: Add Corscience Tricorder board   Thomas Weber
• [U-Boot] [PATCH] OMAP3: Add Corscience Tricorder board   Tom Rini
• [U-Boot] [PATCH] OMAP3: Add Corscience Tricorder board   Igor Grinberg
• [U-Boot] [PATCH] OMAP3: Change devkit8000 maintainer   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3: Remove unused define CONFIG_OMAP3_*_DDR   Thomas Weber
• [U-Boot] [PATCH] OMAP3: Remove unused define CONFIG_OMAP3_*_DDR   Igor Grinberg
• [U-Boot] [PATCH] OMAP3: Remove unused define CONFIG_OMAP3_*_DDR   Luca Ceresoli
• [U-Boot] [PATCH] omap4: fix boot issue on ES2.0 Panda   Aneesh V
• [U-Boot] [PATCH] omap4: fix boot issue on ES2.0 Panda   asad
• [U-Boot] [PATCH] omap4: fix boot issue on ES2.0 Panda   Raúl Porcel
• [U-Boot] [PATCH] omap4_panda: Initialize the USB phy   clalancette at gmail.com
• [U-Boot] [PATCH] omap4_panda: Initialize the USB phy   Aneesh V
• [U-Boot] [PATCH] omap4_panda: Initialize the USB phy   Tom Rini
• [U-Boot] [PATCH] omap4_panda: Initialize the USB phy   Chris Lalancette
• [U-Boot] [PATCH] omap: TWL4030 Bump VMMC1 interface voltage from 3V to 3.15V   Anatolij Gustschin
• [U-Boot] [PATCH] Origen: Select SCLKMPLL as FIMD0 parent clock   Chander Kashyap
• [U-Boot] [PATCH] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH] overo: add SPL support   Steve Sakoman
• [U-Boot] [PATCH] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH] overo: add SPL support   Tom Rini
• [U-Boot] [PATCH] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH] overo: add SPL support   Tom Rini
• [U-Boot] [PATCH] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH] overo: add SPL support   Wolfgang Denk
• [U-Boot] [PATCH] overo: add SPL support   Tom Rini
• [U-Boot] [PATCH] overo: add SPL support   Wolfgang Denk
• [U-Boot] [PATCH] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH] overo: add SPL support   Wolfgang Denk
• [U-Boot] [PATCH] overo: add SPL support   Igor Grinberg
• [U-Boot] [PATCH] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH] overo: add SPL support   Steve Sakoman
• [U-Boot] [PATCH] overo: add SPL support   Aneesh V
• [U-Boot] [PATCH] overo: add SPL support   Wolfgang Denk
• [U-Boot] [PATCH] overo: add SPL support   Andreas Müller
• [U-Boot] [PATCH] p2041rdb: fix serdes clock map   Shaohui Xie
• [U-Boot] [PATCH] p2041rdb: fix serdes clock map   Kumar Gala
• [U-Boot] [PATCH] phy: add Micrel KS8721BL phy definition   Vladimir Zapolskiy
• [U-Boot] [PATCH] phy: add Micrel KS8721BL phy definition   Wolfgang Denk
• [U-Boot] [PATCH] phy: add phy_smsc_init() declaration   Vladimir Zapolskiy
• [U-Boot] [PATCH] phy: add phy_smsc_init() declaration   Marek Vasut
• [U-Boot] [PATCH] phy: Add support PHY of SMSC   Wolfgang Denk
• [U-Boot] [PATCH] phy: Add support PHY of SMSC   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] pm9261: init serial console before relocation   Anatolij Gustschin
• [U-Boot] [PATCH] pm9263: init serial console before relocation   Anatolij Gustschin
• [U-Boot] [PATCH] pm9g45: init serial console before relocation   Anatolij Gustschin
• [U-Boot] [PATCH] powerpc/85xx: remove useless info of 36-bit Addressing   Shengzhou Liu
• [U-Boot] [PATCH] powerpc/bootm: Flush ramdisk and device tree image when booting on MP   Kumar Gala
• [U-Boot] [PATCH] powerpc/bootm: Flush ramdisk and device tree image when booting on MP   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/bootm: Flush ramdisk and device tree image when booting on MP   Kumar Gala
• [U-Boot] [PATCH] powerpc/bootm: Flush ramdisk and device tree image when booting on MP   Tabi Timur-B04825
• [U-Boot] [PATCH] powerpc/p3060qds: Add board related support for P3060QDS platform   Tabi Timur-B04825
• [U-Boot] [PATCH] powerpc/p3060qds: remove useless CONFIG_PHYS_64BIT   Shengzhou Liu
• [U-Boot] [PATCH] powerpc: Minimal private libgcc to build on Debian   Moffett, Kyle D
• [U-Boot] [PATCH] powerpc: Minimal private libgcc to build on Debian   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: Remove usbdev.c   Wolfgang Denk
• [U-Boot] [PATCH] PPC: fix "Warning: FOO uses hard float, BAR uses soft float".   Wolfgang Denk
• [U-Boot] [PATCH] PPC: fix "Warning: FOO uses hard float, BAR uses soft float".   Stefan Roese
• [U-Boot] [PATCH] PPC: fix "Warning: FOO uses hard float, BAR uses soft float".   Wolfgang Denk
• [U-Boot] [PATCH] PPC: fix "Warning: FOO uses hard float, BAR uses soft float".   Anatolij Gustschin
• [U-Boot] [PATCH] PXA: Fix building for lubbock board   Anatolij Gustschin
• [U-Boot] [PATCH] PXA: Fix building for lubbock board   Marek Vasut
• [U-Boot] [PATCH] PXA: Kill last remnants of set_GPIO_mode function   Anatolij Gustschin
• [U-Boot] [PATCH] PXA: Kill last remnants of set_GPIO_mode function   Albert ARIBAUD
• [U-Boot] [PATCH] PXA: Kill last remnants of set_GPIO_mode function   Anatolij Gustschin
• [U-Boot] [PATCH] PXA: Kill last remnants of set_GPIO_mode function   Marek Vasut
• [U-Boot] [PATCH] PXA: Kill last remnants of set_GPIO_mode function   Wolfgang Denk
• [U-Boot] [PATCH] PXA: Kill last remnants of set_GPIO_mode function   Albert ARIBAUD
• [U-Boot] [PATCH] PXA: Kill last remnants of set_GPIO_mode function   Marek Vasut
• [U-Boot] [PATCH] PXA: Kill last remnants of set_GPIO_mode function   Marek Vasut
• [U-Boot] [PATCH] pxe: get ethaddr from the current device instead of env   Mike Frysinger
• [U-Boot] [PATCH] pxe: get ethaddr from the current device instead of env   Wolfgang Denk
• [U-Boot] [PATCH] pxe: get ethaddr from the current device instead of env   Rob Herring
• [U-Boot] [PATCH] sandbox: Add tap based networking   Matthias Weisser
• [U-Boot] [PATCH] sandbox: Add tap based networking   Simon Glass
• [U-Boot] [PATCH] sandbox: Add tap based networking   Mike Frysinger
• [U-Boot] [PATCH] sandbox: Add tap based networking   Simon Glass
• [U-Boot] [PATCH] sandbox: Add tap based networking   Wolfgang Denk
• [U-Boot] [PATCH] sandbox: fix compiling of cpu/os.c   Andreas Bießmann
• [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Stefano Babic
• [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Fabio Estevam
• [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Marek Vasut
• [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Fabio Estevam
• [U-Boot] [PATCH] sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option   Liu Hui-R64343
• [U-Boot] [PATCH] sdhc_boot: Make mmc_get_env_addr dependant on CONFIG_FSL_ESDHC   Fabio Estevam
• [U-Boot] [PATCH] sf: fix erase debug output   Anatolij Gustschin
• [U-Boot] [PATCH] sh: ecovec: Add support PHY of SMSC   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] sh: ecovec: Add support PHY of SMSC   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board   Wolfgang Denk
• [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board   Vladimir Zapolskiy
• [U-Boot] [PATCH] skat91: add support for SK-AT91SAM9/SIM508 board   Vladimir Zapolskiy
• [U-Boot] [PATCH] sparc: fix unknown escape sequence warnings   Anatolij Gustschin
• [U-Boot] [PATCH] sparc: fix unused variable warnings   Anatolij Gustschin
• [U-Boot] [PATCH] tegra2: Fix out-of-tree build for Ventana.   Wolfgang Denk
• [U-Boot] [PATCH] tegra2: Fix out-of-tree build for Ventana.   Wolfgang Denk
• [U-Boot] [PATCH] tegra2: Fix out-of-tree build for Ventana.   Thierry Reding
• [U-Boot] [PATCH] tegra2: Fix out-of-tree build for Ventana.   Wolfgang Denk
• [U-Boot] [PATCH] tegra2: Optimize out-of-tree build for Ventana.   Thierry Reding
• [U-Boot] [PATCH] tegra2: Use new GPIO APIs in gpio_config_uart()   Anatolij Gustschin
• [U-Boot] [PATCH] tegra2: Use new GPIO APIs in gpio_config_uart()   Stephen Warren
• [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled   Stephen Warren
• [U-Boot] [PATCH] tegra: mmc: Support operation with dcache enabled   Simon Glass
• [U-Boot] [PATCH] tools/env: allow overwrite of ethaddr on default   Grant Erickson
• [U-Boot] [PATCH] tools/env: fix cross-compilation   Grant Erickson
• [U-Boot] [PATCH] tools/envcrc: fix compile breakage   Igor Grinberg
• [U-Boot] [PATCH] tools/envcrc: fix compile breakage   Wolfgang Denk
• [U-Boot] [PATCH] tools/mkenvimage.c: Fix a merge issue   Horst Kronstorfer
• [U-Boot] [PATCH] tools/mkenvimage.c: Fix a merge issue   Wolfgang Denk
• [U-Boot] [PATCH] tools/mkenvimage.c: Fix a merge issue   Horst Kronstorfer
• [U-Boot] [PATCH] tools/setlocalversion: Update from the Linux Kernel   Kyle Moffett
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Allen Martin
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Marek Vasut
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Wolfgang Denk
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Marek Vasut
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Wolfgang Denk
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Igor Grinberg
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Allen Martin
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Moffett, Kyle D
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Allen Martin
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Allen Martin
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Allen Martin
• [U-Boot] [PATCH] USB: add CONFIG_USB_INIT to autoinitialize USB before main_loop   Allen Martin
• [U-Boot] [PATCH] USB: move keyboard polling from EHCI driver into kbd driver   amartin at nvidia.com
• [U-Boot] [PATCH] USB: move keyboard polling from EHCI driver into kbd driver   Allen Martin
• [U-Boot] [PATCH] USB: move keyboard polling from EHCI driver into kbd driver   Remy Bohmer
• [U-Boot] [PATCH] USB: move keyboard polling into kbd driver   Allen Martin
• [U-Boot] [PATCH] USB: reevaluate iomux stdin on USB kbd detect   Allen Martin
• [U-Boot] [PATCH] USB: relax usbcore reset timings   Wolfgang Grandegger
• [U-Boot] [PATCH] usb: s3c_udc_otg: fix GCC 4.6 build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] usb: s3c_udc_otg: fix GCC 4.6 build warnings   Wolfgang Denk
• [U-Boot] [PATCH] USB: Use (get|put)_unaligned_le16 for accessing wMaxPacketSize   Tom Rini
• [U-Boot] [PATCH] USB: Use (get|put)_unaligned_le16 for accessing wMaxPacketSize   Stefan Kristiansson
• [U-Boot] [PATCH] video: cfb_console: fix build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] video: cfb_console: fix build warnings   Wolfgang Denk
• [U-Boot] [PATCH] video: cfb_console: fix build warnings   Anatolij Gustschin
• [U-Boot] [PATCH] video: cfb_console: fix build warnings   Wolfgang Denk
• [U-Boot] [PATCH] x86: Add a default implementation for cleanup_before_linux.   Gabe Black
• [U-Boot] [PATCH] x86: Add a default implementation for cleanup_before_linux.   Graeme Russ
• [U-Boot] [PATCH] x86: Add a default implementation for cleanup_before_linux.   Gabe Black
• [U-Boot] [PATCH] x86: Add a pointer to the global data structure to point to the device tree   Gabe Black
• [U-Boot] [PATCH] x86: Add a pointer to the global data structure to point to the device tree   Simon Glass
• [U-Boot] [PATCH] x86: Add a pointer to the global data structure to point to the device tree   Graeme Russ
• [U-Boot] [PATCH] x86: Add a pointer to the global data structure to point to the device tree   Gabe Black
• [U-Boot] [PATCH] x86: Add a pointer to the global data structure to point to the device tree   Graeme Russ
• [U-Boot] [PATCH] x86: Add a pointer to the global data structure to point to the device tree   Gabe Black
• [U-Boot] [PATCH] x86: Add a pointer to the global data structure to point to the device tree   Graeme Russ
• [U-Boot] [PATCH] x86: Set up the PCI busses when initializing the coreboot "board"   Graeme Russ
• [U-Boot] [PATCH] x86: Set up the PCI busses when initializing the coreboot "board"   Gabe Black
• [U-Boot] [PATCHv2 02/10] mkenvimage: correct and clarify comments and error messages   David Wagner
• [U-Boot] [PATCHv2 02/10] mkenvimage: correct and clarify comments and error messages   Thomas Petazzoni
• [U-Boot] [PATCHv2 02/10] mkenvimage: correct and clarify comments and error messages   David Wagner
• [U-Boot] [PATCHv2 03/10] mkenvimage: Correct the includes and add a missing one   David Wagner
• [U-Boot] [PULL] u-boot-pxa / master   Marek Vasut
• [U-Boot] [PULL] u-boot-pxa / master   Albert ARIBAUD
• [U-Boot] [PULL] u-boot-staging / marek.vasut at gmail.com   Marek Vasut
• [U-Boot] [PULL] u-boot-staging / marek.vasut at gmail.com   Wolfgang Denk
• [U-Boot] [RFC 00/14] x86 touch-ups (Includes new init sequence!)   Graeme Russ
• [U-Boot] [RFC 00/14] x86 touch-ups (Includes new init sequence!)   Graeme Russ
• [U-Boot] [RFC 00/14] x86 touch-ups (Includes new init sequence!)   Simon Glass
• [U-Boot] [RFC 01/14] x86: Import glibc memcpy implementation   Graeme Russ
• [U-Boot] [RFC 02/14] x86: Speed up copy-to-RAM and clear BSS operations   Graeme Russ
• [U-Boot] [RFC 03/14] x86: Allow cache before copy to RAM   Graeme Russ
• [U-Boot] [RFC 04/14] x86: Import MSR/MTRR code from Linux   Graeme Russ
• [U-Boot] [RFC 05/14] x86: Create weak init_cache() function   Graeme Russ
• [U-Boot] [RFC 05/14] x86: Create weak init_cache() function   Simon Glass
• [U-Boot] [RFC 06/14] x86: cache tidy-ups   Graeme Russ
• [U-Boot] [RFC 07/14] CHECKPATCH: arch/x86/cpu/*   Graeme Russ
• [U-Boot] [RFC 08/14] CHECKPATCH: arch/x86/lib/*   Graeme Russ
• [U-Boot] [RFC 09/14] x86: Move do_go_exec() out of board.c   Graeme Russ
• [U-Boot] [RFC 10/14] x86: Move setup_pcat_compatibility() out of board.c   Graeme Russ
• [U-Boot] [RFC 11/14] x86: remove gd->start_addr_sp   Graeme Russ
• [U-Boot] [RFC 12/14] x86: Move relocation code out of board.c   Graeme Russ
• [U-Boot] [RFC 13/14] x86: Simplify board.c   Graeme Russ
• [U-Boot] [RFC 14/14] x86: Tweak initialisation procedure   Graeme Russ
• [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Wolfgang Denk
• [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Wolfgang Denk
• [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Simon Glass
• [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Simon Glass
• [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Graeme Russ
• [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Simon Glass
• [U-Boot] [RFC PATCH 0/19] Create generic board init and move ARM and x86 to it   Graeme Russ
• [U-Boot] [RFC PATCH 0/2] fdt: Deal correctly with alias nodes   Simon Glass
• [U-Boot] [RFC PATCH 0/7] reboard: Introduce generic relocation feature   Simon Glass
• [U-Boot] [RFC PATCH 0/7] reboard: Introduce generic relocation feature   Graeme Russ
• [U-Boot] [RFC PATCH 0/7] reboard: Introduce generic relocation feature   Simon Glass
• [U-Boot] [RFC PATCH 0/7] reboard: Introduce generic relocation feature   Graeme Russ
• [U-Boot] [RFC PATCH 0/7] reboard: Introduce generic relocation feature   Albert ARIBAUD
• [U-Boot] [RFC PATCH 0/7] reboard: Introduce generic relocation feature   Simon Glass
• [U-Boot] [RFC PATCH 0/7] reboard: Introduce generic relocation feature   Simon Glass
• [U-Boot] [RFC PATCH 01/19] Introduce generic global_data   Simon Glass
• [U-Boot] [RFC PATCH 01/19] Introduce generic global_data   Andreas Bießmann
• [U-Boot] [RFC PATCH 02/19] Make relocation functions global   Simon Glass
• [U-Boot] [RFC PATCH 03/19] Add basic initcall implementation   Simon Glass
• [U-Boot] [RFC PATCH 04/19] define CONFIG_SYS_LEGACY_BOARD everywhere   Simon Glass
• [U-Boot] [RFC PATCH 05/19] Add generic post-relocation board_r.c   Simon Glass
• [U-Boot] [RFC PATCH 06/19] Add generic pre-relocation board_f.c   Simon Glass
• [U-Boot] [RFC PATCH 07/19] Add spl load feature   Simon Glass
• [U-Boot] [RFC PATCH 08/19] switch ARM over to generic board   Simon Glass
• [U-Boot] [RFC PATCH 09/19] arm: Remove unused code in board.c, global_data.h   Simon Glass
• [U-Boot] [RFC PATCH 1/2] fdt: Add fdtdec_find_aliases() to deal with alias nodes   Simon Glass
• [U-Boot] [RFC PATCH 1/7] reboard: define CONFIG_SYS_LEGACY_BOARD everywhere   Albert ARIBAUD
• [U-Boot] [RFC PATCH 1/7] reboard: define CONFIG_SYS_LEGACY_BOARD everywhere   Simon Glass
• [U-Boot] [RFC PATCH 1/7] reboard: define CONFIG_SYS_LEGACY_BOARD everywhere   Aneesh V
• [U-Boot] [RFC PATCH 10/19] Add CONFIG_SYS_SYM_OFFSETS to support offset symbols   Simon Glass
• [U-Boot] [RFC PATCH 11/19] x86: Remove compiler warning in sc520_timer.c   Simon Glass
• [U-Boot] [RFC PATCH 12/19] x86: Remove dead code in eNET   Simon Glass
• [U-Boot] [RFC PATCH 13/19] x86: Add processor library and relocation functions   Simon Glass
• [U-Boot] [RFC PATCH 14/19] Tidy up asm/generic sections.h to include x86 symbols   Simon Glass
• [U-Boot] [RFC PATCH 15/19] Add fields required by x86 to global_data   Simon Glass
• [U-Boot] [RFC PATCH 16/19] x86: Change stub example to use asm-generic/sections.h   Simon Glass
• [U-Boot] [RFC PATCH 17/19] x86: Add initial memory barrier macros   Simon Glass
• [U-Boot] [RFC PATCH 18/19] Bring in x86 to unified board architecture   Simon Glass
• [U-Boot] [RFC PATCH 19/19] x86: Remove unused board/global_data code   Simon Glass
• [U-Boot] [RFC PATCH 2/2] tegra: Use fdtdec_find_aliases() to find USB ports   Simon Glass
• [U-Boot] [RFC PATCH 2/7] reboard: Add generic link symbols   Simon Glass
• [U-Boot] [RFC PATCH 3/7] reboard: Add generic relocation feature   Albert ARIBAUD
• [U-Boot] [RFC PATCH 3/7] reboard: Add generic relocation feature   Simon Glass
• [U-Boot] [RFC PATCH 3/7] reboard: Add generic relocation feature   Graeme Russ
• [U-Boot] [RFC PATCH 3/7] reboard: Add generic relocation feature   Simon Glass
• [U-Boot] [RFC PATCH 3/7] reboard: Add generic relocation feature   Mike Frysinger
• [U-Boot] [RFC PATCH 3/7] reboard: Add generic relocation feature   Simon Glass
• [U-Boot] [RFC PATCH 5/7] reboard: arm: Add processor function library   Albert ARIBAUD
• [U-Boot] [RFC PATCH 5/7] reboard: arm: Add processor function library   Simon Glass
• [U-Boot] [RFC PATCH 6/7] reboard: arm: Move over to generic relocation   Simon Glass
• [U-Boot] [RFC PATCH 7/7] reboard: arm: Remove unused code in start.S   Simon Glass
• [U-Boot] [RFC PATCH v2 0/15] bootstage: record and publish boot progress timing   Simon Glass
• [U-Boot] [RFC PATCH v2 01/15] bootstage: Create an initial header for boot progress integers   Simon Glass
• [U-Boot] [RFC PATCH v2 02/15] bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress()   Simon Glass
• [U-Boot] [RFC PATCH v2 03/15] bootstage: Use show_boot_error() for -ve progress numbers   Simon Glass
• [U-Boot] [RFC PATCH v2 04/15] bootstage: Convert progress numbers 1-9 into enums   Simon Glass
• [U-Boot] [RFC PATCH v2 05/15] bootstage: Convert progress numbers 10-19 to enums   Simon Glass
• [U-Boot] [RFC PATCH v2 06/15] bootstage: Convert progress numbers 20-41 to enums   Simon Glass
• [U-Boot] [RFC PATCH v2 07/15] bootstage: Convert IDE progress numbers to enums   Simon Glass
• [U-Boot] [RFC PATCH v2 08/15] bootstage: Convert NAND progress numbers to enums   Simon Glass
• [U-Boot] [RFC PATCH v2 09/15] bootstage: Convert net progress numbers to enums   Simon Glass
• [U-Boot] [RFC PATCH v2 10/15] bootstage: Convert FIT progress numbers to enums   Simon Glass
• [U-Boot] [RFC PATCH v2 11/15] bootstage: Define an optional microsecond timer   Simon Glass
• [U-Boot] [RFC PATCH v2 12/15] bootstage: Replace show_boot_progress/error() with bootstage_...()   Simon Glass
• [U-Boot] [RFC PATCH v2 13/15] bootstage: Add microsecond boot time measurement   Simon Glass
• [U-Boot] [RFC PATCH v2 14/15] bootstage: Plumb in bootstage calls for basic operations   Simon Glass
• [U-Boot] [RFC PATCH v2 15/15] bootstage: arm: Add bootstage calls in board and bootm   Simon Glass
• [U-Boot] [RFC] [PATCH] DaVinci/i2c: allow multiple buses   Jérôme Carretero
• [U-Boot] [RFC] Add 'led' command   Ulf Samuelsson
• [U-Boot] [RFC] Add 'led' command   Simon Glass
• [U-Boot] [RFC] Add 'led' command   Simon Glass
• [U-Boot] [RFC] Add 'led' command   Jason Kridner
• [U-Boot] [RFC] Add 'led' command   Ulf Samuelsson
• [U-Boot] [Samsung] [PATCH 4/6] EEYNOS: Add SMDK5250 board support   Sachin Kamat
• [U-Boot] [STATUS] "next" branch started   Wolfgang Denk
• [U-Boot] [STATUS] "next" branch started   Michael Walle
• [U-Boot] [STATUS] "next" branch started   Anatolij Gustschin
• [U-Boot] [STATUS] "next" branch started   Albert ARIBAUD
• [U-Boot] [STATUS] "next" branch started   Anatolij Gustschin
• [U-Boot] [STATUS] "next" branch started   Wolfgang Denk
• [U-Boot] [STATUS] -rc3 is out   Wolfgang Denk
• [U-Boot] [STATUS] -rc3 is out   Andreas Bießmann
• [U-Boot] [STATUS] -rc3 is out   Albert ARIBAUD
• [U-Boot] [STATUS] -rc3 is out   Wolfgang Denk
• [U-Boot] [STATUS] -rc3 is out   Albert ARIBAUD
• [U-Boot] [STATUS] -rc3 is out   Anatolij Gustschin
• [U-Boot] [STATUS] -rc3 is out   Simon Glass
• [U-Boot] [STATUS] Getting ready for -rc1   Wolfgang Denk
• [U-Boot] [STATUS] Getting ready for -rc1   Graeme Russ
• [U-Boot] [STATUS] Getting ready for -rc1   Igor Grinberg
• [U-Boot] [STATUS] Getting ready for -rc1   Vladimir Zapolskiy
• [U-Boot] [STATUS] Getting ready for -rc1   Wolfgang Denk
• [U-Boot] [STATUS] Getting ready for -rc1   Vladimir Zapolskiy
• [U-Boot] [STATUS] Getting ready for -rc1   Wolfgang Denk
• [U-Boot] [STATUS] Getting ready for -rc1   Jason Hobbs
• [U-Boot] [STATUS] Getting ready for -rc1   Graeme Russ
• [U-Boot] [STATUS] Getting ready for -rc1   Albert ARIBAUD
• [U-Boot] [STATUS] Getting ready for -rc1   Graeme Russ
• [U-Boot] [STATUS] Getting ready for -rc1   Albert ARIBAUD
• [U-Boot] [STATUS] Getting ready for -rc1   Wolfgang Denk
• [U-Boot] [STATUS] Getting ready for -rc1   Albert ARIBAUD
• [U-Boot] [STATUS] Getting ready for -rc1   Vladimir Zapolskiy
• [U-Boot] [STATUS] Getting ready for -rc1   Albert ARIBAUD
• [U-Boot] [STATUS] Getting ready for -rc1   Vladimir Zapolskiy
• [U-Boot] [STATUS] Getting ready for -rc1   Simon Glass
• [U-Boot] [STATUS] Getting ready for -rc1   Macpaul Lin
• [U-Boot] [STATUS] Getting ready for -rc1   Andreas Bießmann
• [U-Boot] [STATUS] Getting ready for -rc1   Wolfgang Denk
• [U-Boot] [STATUS] Getting ready for -rc1   Wolfgang Denk
• [U-Boot] [STATUS] Getting ready for -rc1   Andreas Bießmann
• [U-Boot] [STATUS] Getting ready for -rc1   Wolfgang Denk
• [U-Boot] [STATUS] Getting ready for -rc1   Andreas Bießmann
• [U-Boot] [STATUS] Getting ready for -rc1   Wolfgang Denk
• [U-Boot] [STATUS] Getting ready for -rc1   Sven Schnelle
• [U-Boot] [STATUS] Getting ready for -rc1   Andreas Bießmann
• [U-Boot] [STATUS] v2011.12 released, Merge Window is OPEN   Wolfgang Denk
• [U-Boot] [STATUS] v2011.12-rc1 is out - release date Dec 23   Wolfgang Denk
• [U-Boot] [STATUS] v2011.12-rc1 is out - release date Dec 23   Andreas Bießmann
• [U-Boot] [STATUS] v2011.12-rc1 is out - release date Dec 23   Wolfgang Denk
• [U-Boot] [STATUS] v2011.12-rc1 is out - release date Dec 23   Anatolij Gustschin
• [U-Boot] [STATUS] v2011.12-rc1 is out - release date Dec 23   Macpaul Lin
• [U-Boot] [STATUS] v2011.12-rc1 is out - release date Dec 23   Mike Frysinger
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Wolfgang Denk
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Stefano Babic
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Andreas Bießmann
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Anatolij Gustschin
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Albert ARIBAUD
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Simon Glass
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Chris Lalancette
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Wolfgang Denk
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Wolfgang Denk
• [U-Boot] [STATUS] v2011.12-rc2 is out - finish for release...   Wolfgang Denk
• [U-Boot] [U-Boot, v2, 5/6] da850: add support to read mac address from spi flash   Tom Rini
• [U-Boot] [U-Boot, v3, 2/5] da850evm: rename config file to represent OMAP-L138   Tom Rini
• [U-Boot] __mmc_get_env_addr() is not being called?   Shawn Guo
• [U-Boot] __mmc_get_env_addr() is not being called?   Stefano Babic
• [U-Boot] __mmc_get_env_addr() is not being called?   Fabio Estevam
• [U-Boot] __mmc_get_env_addr() is not being called?   Stefano Babic
• [U-Boot] __mmc_get_env_addr() is not being called?   Kumar Gala
• [U-Boot] __mmc_get_env_addr() is not being called?   Jason Liu
• [U-Boot] __mmc_get_env_addr() is not being called?   Stefano Babic
• [U-Boot] __mmc_get_env_addr() is not being called?   Jason Hui
• [U-Boot] about flashing the u-boot   Érico Porto
• [U-Boot] about flashing the u-boot   Érico Porto
• [U-Boot] about flashing the u-boot   Aggrwal Poonam-B10812
• [U-Boot] about flashing the u-boot   Scott Wood
• [U-Boot] about flashing the u-boot   Érico Porto
• [U-Boot] about flashing the u-boot   Scott Wood
• [U-Boot] about flashing the u-boot   Érico Porto
• [U-Boot] about flashing the u-boot   Scott Wood
• [U-Boot] about flashing the u-boot   Érico Porto
• [U-Boot] about flashing the u-boot   Érico Porto
• [U-Boot] Add ext4 filesystem support in uboot   uma.shankar at samsung.com
• [U-Boot] Add ext4 write support   uma.shankar at samsung.com
• [U-Boot] AES128 in U-Boot   Simon Glass
• [U-Boot] AES128 in U-Boot   Matthias Weißer
• [U-Boot] AES128 in U-Boot   Mike Frysinger
• [U-Boot] AES128 in U-Boot   Simon Glass
• [U-Boot] Any help on the sbc2410x board   Athanasios Silis
• [U-Boot] Any help on the sbc2410x board   Stefano Babic
• [U-Boot] Any help on the sbc2410x board   Athanasios Silis
• [U-Boot] Any help on the sbc2410x board   Stefano Babic
• [U-Boot] Any help on the sbc2410x board   Athanasios Silis
• [U-Boot] arm, da850: gpio control   Gabriele Filosofi
• [U-Boot] arm, da850: gpio control (Topic 37)   Gabriele Filosofi
• [U-Boot] arm, da850: Question about gpio control   Gabriele Filosofi
• [U-Boot] arm, da850: Question about start point   Gabriele Filosofi
• [U-Boot] arm, da850: Question about start point   Christian Riesch
• [U-Boot] ATM/13470/IDR   PRIME MINISTER'S OFFICE
• [U-Boot] ATTN.........   DR.MACK HORRIS
• [U-Boot] Beginner   bart.deboeck at xenopz.com
• [U-Boot] Beginner   Marek Vasut
• [U-Boot] Beginner   bart.deboeck at xenopz.com
• [U-Boot] Beginner   Wolfgang Denk
• [U-Boot] Beginner   Marek Vasut
• [U-Boot] Beginner   bart.deboeck at xenopz.com
• [U-Boot] Beginner   bart.deboeck at xenopz.com
• [U-Boot] Beginner   bart.deboeck at xenopz.com
• [U-Boot] Boot Count Support for MPC8377E   Sridhar Addagada
• [U-Boot] Boot Count Support for MPC8377E   Sridhar Addagada
• [U-Boot] Boot Count Support for MPC8377E   Wolfgang Denk
• [U-Boot] Boot Count Support for MPC8377E   Scott Wood
• [U-Boot] Build breakage due to "Standalone Apps: Standalone apps should only need exports.h"   Mike Frysinger
• [U-Boot] Build breakage due to "Standalone Apps: Standalone apps should only need exports.h"   Moffett, Kyle D
• [U-Boot] Build breakage due to "Standalone Apps: Standalone apps should only need exports.h"   Mike Partington
• [U-Boot] Building uImage with multiple load addresses   Fabio Estevam
• [U-Boot] Building uImage with multiple load addresses   Fabio Estevam
• [U-Boot] Building uImage with multiple load addresses   Stephen Warren
• [U-Boot] Building uImage with multiple load addresses   Marek Vasut
• [U-Boot] Building uImage with multiple load addresses   Stefano Babic
• [U-Boot] Building uImage with multiple load addresses   Stefano Babic
• [U-Boot] Building uImage with multiple load addresses   Wolfgang Denk
• [U-Boot] Building uImage with multiple load addresses   Stefano Babic
• [U-Boot] Building uImage with multiple load addresses   Wolfgang Denk
• [U-Boot] Building uImage with multiple load addresses   Fabio Estevam
• [U-Boot] Cache function change breaks zmx25   Matthias Weißer
• [U-Boot] Cache function change breaks zmx25   Ilya Yanok
• [U-Boot] Cache function change breaks zmx25   Matthias Weisser
• [U-Boot] Cannot access a FAT filesystem in an El-Torito partition   Moffett, Kyle D
• [U-Boot] Cannot access a FAT filesystem in an El-Torito partition   Wolfgang Denk
• [U-Boot] Cannot access a FAT filesystem in an El-Torito partition   Moffett, Kyle D
• [U-Boot] Change to miiphy_register() creates warnings   Simon Glass
• [U-Boot] Change to miiphy_register() creates warnings   Mike Frysinger
• [U-Boot] Change to miiphy_register() creates warnings   Wolfgang Denk
• [U-Boot] Change to miiphy_register() creates warnings   Wolfgang Denk
• [U-Boot] Change to miiphy_register() creates warnings   Simon Glass
• [U-Boot] cmd_sf warning on size_t   Thomas Chou
• [U-Boot] cmd_sf warning on size_t   Andreas Bießmann
• [U-Boot] CPU POST on MPC5200 fails with U-Boot built using GCC 4.6.1   Anatolij Gustschin
• [U-Boot] cześć   mariana goodluck
• [U-Boot] Delivery Status Notification (Failure)   Mail Delivery System
• [U-Boot] Do we want a generic key code input handler   Simon Glass
• [U-Boot] Enable access to FAT filesystem in an ISO9660 El-Torito volume   Kyle Moffett
• [U-Boot] ep93xx port status   Martin Guy
• [U-Boot] ep93xx port status   Marek Vasut
• [U-Boot] ep93xx port status   Matthias Kaehlcke
• [U-Boot] ep93xx port status   Martin Guy
• [U-Boot] escape sequence issue   Frans Meulenbroeks
• [U-Boot] escape sequence issue   Wolfgang Denk
• [U-Boot] ext4 support?   Dominic Lemire
• [U-Boot] ext4 support?   Jason
• [U-Boot] ext4 support?   Wolfgang Denk
• [U-Boot] fsl_esdhc.c bug   Jim Lentz
• [U-Boot] fsl_esdhc.c bug   Graeme Russ
• [U-Boot] fsl_esdhc.c bug   Fabio Estevam
• [U-Boot] fsl_esdhc.c bug   Jim Lentz
• [U-Boot] fsl_esdhc.c bug   Ira W. Snyder
• [U-Boot] Fw:   jobhunts02 at aol.com
• [U-Boot] FW: [PATCH v3] AT91: pio: Add PIO3 features   Xu, Hong
• [U-Boot] FW: FW: [PATCH v3] AT91: pio: Add PIO3 features   Xu, Hong
• [U-Boot] FW: FW: [PATCH v3] AT91: pio: Add PIO3 features   Xu, Hong
• [U-Boot] Fwd: [PATCH v6 1/2] Introduce generic TPM support in u-boot   Vadim Bendebury
• [U-Boot] Generic keyboard input handler   Simon Glass
• [U-Boot] Good News   FedEx Courier Express
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Scott Wood
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Scott Wood
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Wolfgang Denk
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Wolfgang Denk
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Wolfgang Denk
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Wolfgang Denk
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Wolfgang Denk
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Wolfgang Denk
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Robert P. J. Day
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Robert P. J. Day
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Robert P. J. Day
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Robert P. J. Day
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Robert P. J. Day
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Robert P. J. Day
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Robert P. J. Day
• [U-Boot] having trouble booting a simple kernel on a TQM860 board   Robert P. J. Day
• [U-Boot] How to test a new u-boot image over network?   vikas.sontakke at emc.com
• [U-Boot] How to test a new u-boot image over network?   Anatolij Gustschin
• [U-Boot] How to test a new u-boot image over network?   Wolfgang Denk
• [U-Boot] How to test a new u-boot image over network?   vikas.sontakke at emc.com
• [U-Boot] How to test a new u-boot image over network?   vikas.sontakke at emc.com
• [U-Boot] How to test a new u-boot image over network?   Wolfgang Denk
• [U-Boot] How to test a new u-boot image over network?   vikas.sontakke at emc.com
• [U-Boot] How to test a new u-boot image over network?   Stefan Roese
• [U-Boot] How to test a new u-boot image over network?   vikas.sontakke at emc.com
• [U-Boot] How to test a new u-boot image over network?   Stefan Roese
• [U-Boot] iMX53 LCD support.   Vellemans, Noel
• [U-Boot] iMX53 LCD support.   Stefano Babic
• [U-Boot] Intent of CONFIG_NAND_ENV_DST?   Tom Rini
• [U-Boot] Intent of CONFIG_NAND_ENV_DST?   Scott Wood
• [U-Boot] Intent of CONFIG_NAND_ENV_DST?   Tom Rini
• [U-Boot] is the online DULG-tqm8xxL guide reasonably up to date?   Robert P. J. Day
• [U-Boot] is the online DULG-tqm8xxL guide reasonably up to date?   Wolfgang Denk
• [U-Boot] is the online DULG-tqm8xxL guide reasonably up to date?   Robert P. J. Day
• [U-Boot] is the online DULG-tqm8xxL guide reasonably up to date?   Anatolij Gustschin
• [U-Boot] LL TEMAC V7 refactored   Stephan Linz
• [U-Boot] LPC32XX / DevKit3250 support   Vladimir Zapolskiy
• [U-Boot] m28evk: OOT build leaves stale file in source dir   Wolfgang Denk
• [U-Boot] m28evk: OOT build leaves stale file in source dir   Marek Vasut
• [U-Boot] need to add support for ISP1507 USB ULPI PHY for a PowerPC 85xx-based board   Daniel Nilsson
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Michael Kebe
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Wolfgang Denk
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Michael Kebe
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Wolfgang Denk
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Michael Kebe
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Wolfgang Denk
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Michael Kebe
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Paul Gortmaker
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Marek Vasut
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Paul Gortmaker
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Wolfgang Denk
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Michael Kebe
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Wolfgang Denk
• [U-Boot] New Oxford Semiconductor board with assertion fail in linker   Wolfgang Denk
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• No subject  
• [U-Boot] Non-OMAP/DaVinci ARM SPL? (Was: Re: [PATCH V9 2/4] omap-common: Add NAND SPL linux booting)   Tom Rini
• [U-Boot] Non-OMAP/DaVinci ARM SPL? (Was: Re: [PATCH V9 2/4] omap-common: Add NAND SPL linux booting)   Igor Grinberg
• [U-Boot] Non-OMAP/DaVinci ARM SPL? (Was: Re: [PATCH V9 2/4] omap-common: Add NAND SPL linux booting)   Stefano Babic
• [U-Boot] Non-OMAP/DaVinci ARM SPL? (Was: Re: [PATCH V9 2/4] omap-common: Add NAND SPL linux booting)   Simon Glass
• [U-Boot] OMAP4 u-boot broken (was [PATCH] usb: align usb_endpoint_descriptor to 16-bit boundary)   Aneesh V
• [U-Boot] OMAP4 u-boot broken (was [PATCH] usb: align usb_endpoint_descriptor to 16-bit boundary)   Stefan Kristiansson
• [U-Boot] OMAP4 u-boot broken (was [PATCH] usb: align usb_endpoint_descriptor to 16-bit boundary)   Michael Jones
• [U-Boot] OMAP4 u-boot broken (was [PATCH] usb: align usb_endpoint_descriptor to 16-bit boundary)   Aneesh V
• [U-Boot] OMAP4 u-boot broken (was [PATCH] usb: align usb_endpoint_descriptor to 16-bit boundary)   Tom Rini
• [U-Boot] OMAP4 u-boot broken (was [PATCH] usb: align usb_endpoint_descriptor to 16-bit boundary)   Tom Rini
• [U-Boot] omap: overo: Use ubifs instead of jffs2 for nand   Anatolij Gustschin
• [U-Boot] p2020 and Micron MT47H64M16HR memory and u-boot   wzab
• [U-Boot] p2020 and Micron MT47H64M16HR memory and u-boot   wzab
• [U-Boot] p2020 and Micron MT47H64M16HR memory and u-boot   Felix Radensky
• [U-Boot] p2020 and Micron MT47H64M16HR memory and u-boot   Wojciech Zabolotny
• [U-Boot] PIP405: build warnings   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Wolfgang Denk
• [U-Boot] please pull u-boot-samsung/master   Minkyu Kang
• [U-Boot] please pull u-boot-samsung/master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-staging/sr at denx.de   Stefan Roese
• [U-Boot] Please pull u-boot-staging/sr at denx.de   Stefan Roese
• [U-Boot] Please pull u-boot-staging/sr at denx.de   Wolfgang Denk
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/master   Tom Rini
• [U-Boot] Please pull u-boot-ti/master (updated!)   Tom Rini
• [U-Boot] Please pull u-boot-ti/master (updated!)   Tom Rini
• [U-Boot] Please pull u-boot-ti/master (updated!)   Albert ARIBAUD
• [U-Boot] Please pull u-boot-ti/next   Tom Rini
• [U-Boot] Please pull u-boot-ti/next   Albert ARIBAUD
• [U-Boot] powerpc: FOO uses hard float, BAR uses soft float   Wolfgang Denk
• [U-Boot] powerpc: FOO uses hard float, BAR uses soft float   Stephen Warren
• [U-Boot] powerpc: FOO uses hard float, BAR uses soft float   Kumar Gala
• [U-Boot] powerpc: FOO uses hard float, BAR uses soft float   Wolfgang Denk
• [U-Boot] PPC4xx: usbdev.c used at all?   Stefan Roese
• [U-Boot] PPC4xx: usbdev.c used at all?   Wolfgang Denk
• [U-Boot] printf in uboot   Sidharth Baisane
• [U-Boot] printf in uboot   siddharth baisane
• [U-Boot] printf in uboot   Hebbar, Gururaja
• [U-Boot] printf in uboot   Simon Glass
• [U-Boot] printf in uboot   Graeme Russ
• [U-Boot] Problem accessing MONITOR_BASE in start.S   Jean-Michel Hautbois
• [U-Boot] Pull request u-boot-blackfin.git (sandbox branch)   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git (sandbox branch)   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Pull request: nand flash (updated)   Scott Wood
• [U-Boot] Pull request: nand flash (updated)   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-arm/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-arm/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-nios/master   Thomas Chou
• [U-Boot] Pull request: u-boot-sh   Nobuhiro Iwamatsu
• [U-Boot] Pull request: u-boot-sh   Wolfgang Denk
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Wolfgang Denk
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Wolfgang Denk
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Wolfgang Denk
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Wolfgang Denk
• [U-Boot] Pull request: u-boot-tegra/master   Tom Warren
• [U-Boot] Pull request: u-boot-tegra/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-tegra/master   Stephen Warren
• [U-Boot] Pull request: u-boot-tegra/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-tegra/master   Stephen Warren
• [U-Boot] Pull request: u-boot-tegra/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-tegra/master   Stephen Warren
• [U-Boot] Pull request: u-boot-tegra/master   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-tegra/master, take 2   Tom Warren
• [U-Boot] Pull request: u-boot-tegra/master, take 2   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-tegra/next   Tom Warren
• [U-Boot] Pull request: u-boot-tegra/next   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-tegra/next   Stephen Warren
• [U-Boot] Pull request: u-boot-tegra/next   Tom Warren
• [U-Boot] Pull request: u-boot-tegra/next   Tom Warren
• [U-Boot] Pull request: u-boot-tegra/next   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-tegra/next   Tom Warren
• [U-Boot] Pull request: u-boot-tegra/next   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-tegra/next   Wolfgang Denk
• [U-Boot] Pull request: u-boot-tegra/next   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-tegra/next   Wolfgang Denk
• [U-Boot] Pull request: u-boot-tegra/next   Albert ARIBAUD
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
• [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
• [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
• [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-x86   Wolfgang Denk
• [U-Boot] Pull request: u-boot-x86/next   Graeme Russ
• [U-Boot] Pull request: u-boot-x86/next   Wolfgang Denk
• [U-Boot] pxe: make the first label the implicit default   Wolfgang Denk
• [U-Boot] Question about iMX28 SPI flash driver   Alexander Keller
• [U-Boot] Question about iMX28 SPI flash driver   Stefano Babic
• [U-Boot] Question about iMX28 SPI flash driver   Fabio Estevam
• [U-Boot] Question about theKernel   StrongLeg
• [U-Boot] Question about theKernel   Wolfgang Denk
• [U-Boot] Question about theKernel   Wolfgang Denk
• [U-Boot] question regarding generic board.c   Andreas Bießmann
• [U-Boot] question regarding generic board.c   Simon Glass
• [U-Boot] reboard: generic relocation patch series   Simon Glass
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Graeme Russ
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Wolfgang Denk
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Graeme Russ
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Ilya Yanok
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Graeme Russ
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Ulf Samuelsson
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Ilya Yanok
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Graeme Russ
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Ilya Yanok
• [U-Boot] Request for Help: How to save data to an SD/MMC card   Graeme Russ
• [U-Boot] Reset Status on MPC83xx   Sridhar Addagada
• [U-Boot] Reset Status on MPC83xx   Wolfgang Denk
• [U-Boot] Reset Status on MPC83xx   Sridhar Addagada
• [U-Boot] Sandbox question   Andreas Bießmann
• [U-Boot] Sandbox question   Simon Glass
• [U-Boot] Sandbox question   Mike Frysinger
• [U-Boot] sata_sil Driver on a PowerPC   johnc
• [U-Boot] sata_sil Driver on a PowerPC   Stefan Roese
• [U-Boot] sata_sil Driver on a PowerPC   John M Cavallo
• [U-Boot] sata_sil Driver on a PowerPC   Stefan Roese
• [U-Boot] Secure update of uboot devices?   Andreas Bäck
• [U-Boot] Secure update of uboot devices?   Marek Vasut
• [U-Boot] Secure update of uboot devices?   Andreas Bäck
• [U-Boot] Secure update of uboot devices?   Wolfgang Denk
• [U-Boot] Segmented RAM, big userspace.   Sergey Lapin
• [U-Boot] Segmented RAM, big userspace.   Wolfgang Denk
• [U-Boot] Segmented RAM, big userspace.   Sergey Lapin
• [U-Boot] Segmented RAM, big userspace.   Wolfgang Denk
• [U-Boot] Segmented RAM, big userspace.   Scott Wood
• [U-Boot] Some thoughts on SPL   jonsmirl at gmail.com
• [U-Boot] Some thoughts on SPL   Scott Wood
• [U-Boot] Some thoughts on SPL   Simon Glass
• [U-Boot] Some thoughts on SPL   jonsmirl at gmail.com
• [U-Boot] Some thoughts on SPL   Wolfgang Denk
• [U-Boot] Some thoughts on SPL   Simon Glass
• [U-Boot] Some thoughts on SPL   jonsmirl at gmail.com
• [U-Boot] Some thoughts on SPL   Tom Rini
• [U-Boot] Some thoughts on SPL   Scott Wood
• [U-Boot] Some thoughts on SPL   Tom Rini
• [U-Boot] SPL Linux Boot   Stefano Babic
• [U-Boot] SPL Linux Boot   Tom Rini
• [U-Boot] SPL Linux Boot   Stefano Babic
• [U-Boot] SPL Linux Boot   Stefano Babic
• [U-Boot] SPL Linux Boot   Tom Rini
• [U-Boot] sspi command creates chip select at wrong time   Bishop, Mark
• [U-Boot] Starting point of uboot learning from scratch..pls help<eom>   Anand Anand
• [U-Boot] Store ENTER ('\r') character in bootstopkey variable   Giuseppe Modugno
• [U-Boot] Store ENTER ('\r') character in bootstopkey variable   Wolfgang Denk
• [U-Boot] Store ENTER ('\r') character in bootstopkey variable   Giuseppe Modugno
• [U-Boot] Store ENTER ('\r') character in bootstopkey variable   Wolfgang Denk
• [U-Boot] Store ENTER ('\r') character in bootstopkey variable   Giuseppe Modugno
• [U-Boot] Store ENTER ('\r') character in bootstopkey variable   Wolfgang Denk
• [U-Boot] Subject: [PATCH 0/2] ** Add ext4 filesystem support in uboot **   uma.shankar at samsung.com
• [U-Boot] Subject: [PATCH 0/2] ** Add ext4 filesystem support in uboot **   Graeme Russ
• [U-Boot] Subject: [PATCH 0/2] ** Add ext4 filesystem support in uboot **   Wolfgang Denk
• [U-Boot] Subject: [PATCH 0/2] ** Add ext4 filesystem support inuboot **   uma.shankar at samsung.com
• [U-Boot] Subject: [PATCH 0/2] ** Add ext4 filesystem support inuboot **   Graeme Russ
• [U-Boot] Subject: [PATCH 1/2] ext4fs ls load support   uma.shankar at samsung.com
• [U-Boot] Subject: [PATCH 1/2] ext4fs ls load support   Graeme Russ
• [U-Boot] Subject: [PATCH 2/2] ext4fs write support   uma.shankar at samsung.com
• [U-Boot] Support for P1011 CCSRBAR   amruth vamadev
• [U-Boot] Support for P1011 CCSRBAR   Aggrwal Poonam-B10812
• [U-Boot] test mail   uma.shankar at samsung.com
• [U-Boot] testing u-boot on virtual environment   Érico Porto
• [U-Boot] testing u-boot on virtual environment   Graeme Russ
• [U-Boot] testing u-boot on virtual environment   Érico Porto
• [U-Boot] testing u-boot on virtual environment   Érico Porto
• [U-Boot] testing u-boot on virtual environment   Érico Porto
• [U-Boot] testing u-boot on virtual environment   Érico Porto
• [U-Boot] testing u-boot on virtual environment   Matthias Weißer
• [U-Boot] testing u-boot on virtual environment   Albert ARIBAUD
• [U-Boot] testing u-boot on virtual environment   Simon Glass
• [U-Boot] testing u-boot on virtual environment   Albert ARIBAUD
• [U-Boot] testing u-boot on virtual environment   Matthias Weißer
• [U-Boot] testing u-boot on virtual environment   Érico Porto
• [U-Boot] Thinking of buying "Beagle Board XM"   Ritesh BANSAL
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Marek Vasut
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Wolfgang Denk
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Marek Vasut
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Wolfgang Denk
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Robert P. J. Day
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Robert P. J. Day
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Robert P. J. Day
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Robert P. J. Day
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Robert P. J. Day
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Anatolij Gustschin
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Robert P. J. Day
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Anatolij Gustschin
• [U-Boot] TQM860L_config: u-boot.lds:76 cannot move location counter backwards   Robert P. J. Day
• [U-Boot] Transferring images quickly with no Ethernet   Rishi Dhupar
• [U-Boot] Transferring images quickly with no Ethernet   Marek Vasut
• [U-Boot] Transferring images quickly with no Ethernet   John Rigby
• [U-Boot] U-boot doesn't work on OMAP4430 ES2.0   Raúl Porcel
• [U-Boot] U-boot doesn't work on OMAP4430 ES2.0   Marek Vasut
• [U-Boot] U-boot doesn't work on OMAP4430 ES2.0   Tom Rini
• [U-Boot] U-boot doesn't work on OMAP4430 ES2.0   Aneesh V
• [U-Boot] U-boot doesn't work on OMAP4430 ES2.0   Raúl Porcel
• [U-Boot] u-boot jumps to some location   siddharth baisane
• [U-Boot] u-boot jumps to some location   Stefano Babic
• [U-Boot] u-boot jumps to some location   Stefano Babic
• [U-Boot] u-boot jumps to some location   Aneesh V
• [U-Boot] u-boot jumps to some location   siddharth baisane
• [U-Boot] u-boot jumps to some location   Hebbar, Gururaja
• [U-Boot] U-Boot on Nokia RX-51 (aka N900)   Pali Rohár
• [U-Boot] U-Boot on Nokia RX-51 (aka N900)   Wolfgang Denk
• [U-Boot] U-Boot on Nokia RX-51 (aka N900)   Pali Rohár
• [U-Boot] U-Boot on Nokia RX-51 (aka N900)   Wolfgang Denk
• [U-Boot] U-Boot on Nokia RX-51 (aka N900)   Mike Frysinger
• [U-Boot] U-Boot on Nokia RX-51 (aka N900)   Pali Rohár
• [U-Boot] u-boot v2011.12-rc1 hang on pandaboard   Chris Lalancette
• [U-Boot] u-boot v2011.12-rc1 hang on pandaboard   Robert Nelson
• [U-Boot] u-boot-x86/next has been rebased - push forced   Graeme Russ
• [U-Boot] U-boto CRC error   smitha.vanga at wipro.com
• [U-Boot] U-boto CRC error   Wolfgang Denk
• [U-Boot] U-boto CRC error   Prafulla Wadaskar
• [U-Boot] Uboot build system question   Bharath H S
• [U-Boot] uImage:multi or single file?   Frank Lassowski
• [U-Boot] undefined reference to `abort'   Shadid, Bill
• [U-Boot] undefined reference to `abort'   Mike Frysinger
• [U-Boot] undefined reference to `abort'   Matthias Weißer
• [U-Boot] undefined reference to `abort'   Shadid, Bill
• [U-Boot] undefined reference to `abort'   Mike Frysinger
• [U-Boot] undefined reference to `abort'   Wolfgang Denk
• [U-Boot] undefined reference to `abort'   Wolfgang Denk
• [U-Boot] undefined reference to `abort'   Wolfgang Denk
• [U-Boot] use mx5 ehci usb support patch, but just 1 port detected   Stefano Babic
• [U-Boot] use mx5 ehci usb support patch, but just 1 port detected   华 梁
• [U-Boot] virus has been detected   UPGRADE ACCOUNT
• [U-Boot] Where I'm going with x86 board.c   Graeme Russ
• [U-Boot] Where I'm going with x86 board.c   Simon Glass
• [U-Boot] Where I'm going with x86 board.c   Graeme Russ
• [U-Boot] Where I'm going with x86 board.c   Simon Glass
• [U-Boot] Where I'm going with x86 board.c   Albert ARIBAUD
• [U-Boot] Where I'm going with x86 board.c   Simon Glass