[U-Boot] [PATCH V4 1/2] ehci-omap: driver for EHCI host on OMAP3
Ilya Yanok
yanok at emcraft.com
Tue Dec 13 00:15:12 CET 2011
Taken from Beagle code. Tested on mcx board (AM3517-based).
Signed-off-by: Ilya Yanok <yanok at emcraft.com>
---
Changes from V3:
- None
Changes from V2:
- None
Changes from V1:
- CONFIG_OMAP_EHCI_PHYx_RESET changed to CONFIG_OMAP_EHCI_PHYx_RESET_GPIO
- phy reset moved to separate function
- Calls to gpio_set_value after gpio_direction_output removed
board/ti/beagle/beagle.c | 101 --------------------------
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-omap.c | 156 ++++++++++++++++++++++++++++++++++++++++
include/configs/omap3_beagle.h | 3 +
4 files changed, 160 insertions(+), 101 deletions(-)
create mode 100644 drivers/usb/host/ehci-omap.c
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 6a457cb..3d63028 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -42,15 +42,6 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
-#ifdef CONFIG_USB_EHCI
-#include <usb.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/clocks_omap3.h>
-#include <asm/arch/ehci_omap3.h>
-/* from drivers/usb/host/ehci-core.h */
-extern struct ehci_hccr *hccr;
-extern volatile struct ehci_hcor *hcor;
-#endif
#include "beagle.h"
#include <command.h>
@@ -441,104 +432,12 @@ int board_mmc_init(bd_t *bis)
#endif
#ifdef CONFIG_USB_EHCI
-
-#define GPIO_PHY_RESET 147
-
-/* Reset is needed otherwise the kernel-driver will throw an error. */
-int ehci_hcd_stop(void)
-{
- pr_debug("Resetting OMAP3 EHCI\n");
- gpio_set_value(GPIO_PHY_RESET, 0);
- writel(OMAP_UHH_SYSCONFIG_SOFTRESET, OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
- /* disable USB clocks */
- struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
- sr32(&prcm_base->iclken_usbhost, 0, 1, 0);
- sr32(&prcm_base->fclken_usbhost, 0, 2, 0);
- sr32(&prcm_base->iclken3_core, 2, 1, 0);
- sr32(&prcm_base->fclken3_core, 2, 1, 0);
- return 0;
-}
-
/* Call usb_stop() before starting the kernel */
void show_boot_progress(int val)
{
if(val == 15)
usb_stop();
}
-
-/*
- * Initialize the OMAP3 EHCI controller and PHY on the BeagleBoard.
- * Based on "drivers/usb/host/ehci-omap.c" from Linux 2.6.37.
- * See there for additional Copyrights.
- */
-int ehci_hcd_init(void)
-{
- pr_debug("Initializing OMAP3 ECHI\n");
-
- /* Put the PHY in RESET */
- gpio_request(GPIO_PHY_RESET, "");
- gpio_direction_output(GPIO_PHY_RESET, 0);
- gpio_set_value(GPIO_PHY_RESET, 0);
-
- /* Hold the PHY in RESET for enough time till DIR is high */
- /* Refer: ISSUE1 */
- udelay(10);
-
- struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
- /* Enable USBHOST_L3_ICLK (USBHOST_MICLK) */
- sr32(&prcm_base->iclken_usbhost, 0, 1, 1);
- /*
- * Enable USBHOST_48M_FCLK (USBHOST_FCLK1)
- * and USBHOST_120M_FCLK (USBHOST_FCLK2)
- */
- sr32(&prcm_base->fclken_usbhost, 0, 2, 3);
- /* Enable USBTTL_ICLK */
- sr32(&prcm_base->iclken3_core, 2, 1, 1);
- /* Enable USBTTL_FCLK */
- sr32(&prcm_base->fclken3_core, 2, 1, 1);
- pr_debug("USB clocks enabled\n");
-
- /* perform TLL soft reset, and wait until reset is complete */
- writel(OMAP_USBTLL_SYSCONFIG_SOFTRESET,
- OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
- /* Wait for TLL reset to complete */
- while (!(readl(OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSSTATUS)
- & OMAP_USBTLL_SYSSTATUS_RESETDONE));
- pr_debug("TLL reset done\n");
-
- writel(OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
- OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
- OMAP_USBTLL_SYSCONFIG_CACTIVITY,
- OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
-
- /* Put UHH in NoIdle/NoStandby mode */
- writel(OMAP_UHH_SYSCONFIG_ENAWAKEUP
- | OMAP_UHH_SYSCONFIG_SIDLEMODE
- | OMAP_UHH_SYSCONFIG_CACTIVITY
- | OMAP_UHH_SYSCONFIG_MIDLEMODE,
- OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
-
- /* setup burst configurations */
- writel(OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
- | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
- | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN,
- OMAP3_UHH_BASE + OMAP_UHH_HOSTCONFIG);
-
- /*
- * Refer ISSUE1:
- * Hold the PHY in RESET for enough time till
- * PHY is settled and ready
- */
- udelay(10);
- gpio_set_value(GPIO_PHY_RESET, 1);
-
- hccr = (struct ehci_hccr *)(OMAP3_EHCI_BASE);
- hcor = (struct ehci_hcor *)(OMAP3_EHCI_BASE + 0x10);
-
- pr_debug("OMAP3 EHCI init done\n");
- return 0;
-}
-
#endif /* CONFIG_USB_EHCI */
#ifndef CONFIG_SPL_BUILD
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 77e217f..975c3e5 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -43,6 +43,7 @@ endif
COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
COBJS-$(CONFIG_USB_EHCI_MX5) += ehci-mx5.o
+COBJS-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
new file mode 100644
index 0000000..93d3bb7
--- /dev/null
+++ b/drivers/usb/host/ehci-omap.c
@@ -0,0 +1,156 @@
+/*
+ * (C) Copyright 2011 Ilya Yanok, Emcraft Systems
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Derived from Beagle Board code by
+ * Sunil Kumar <sunilsaini05 at gmail.com>
+ * Shashi Ranjan <shashiranjanmca05 at gmail.com>
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+#include <common.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/clocks_omap3.h>
+#include <asm/arch/ehci_omap3.h>
+#include <asm/arch/sys_proto.h>
+#include "ehci-core.h"
+
+inline int __board_usb_init(void)
+{
+ return 0;
+}
+int board_usb_init(void) __attribute__((weak, alias("__board_usb_init")));
+
+#if defined(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO) || \
+ defined(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO)
+/* controls PHY(s) reset signal(s) */
+static inline void omap_ehci_phy_reset(int on, int delay)
+{
+ /*
+ * Refer ISSUE1:
+ * Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ if (delay && !on)
+ udelay(delay);
+#ifdef CONFIG_OMAP_EHCI_PHY1_RESET_GPIO
+ gpio_request(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, "USB PHY1 reset");
+ gpio_direction_output(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO, !on);
+#endif
+#ifdef CONFIG_OMAP_EHCI_PHY2_RESET_GPIO
+ gpio_request(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, "USB PHY2 reset");
+ gpio_direction_output(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, !on);
+#endif
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ /* Refer: ISSUE1 */
+ if (delay && on)
+ udelay(delay);
+}
+#else
+#define omap_ehci_phy_reset(on, delay) do {} while (0)
+#endif
+
+/* Reset is needed otherwise the kernel-driver will throw an error. */
+int ehci_hcd_stop(void)
+{
+ debug("Resetting OMAP3 EHCI\n");
+ omap_ehci_phy_reset(1, 0);
+ writel(OMAP_UHH_SYSCONFIG_SOFTRESET,
+ OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
+ /* disable USB clocks */
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ sr32(&prcm_base->iclken_usbhost, 0, 1, 0);
+ sr32(&prcm_base->fclken_usbhost, 0, 2, 0);
+ sr32(&prcm_base->iclken3_core, 2, 1, 0);
+ sr32(&prcm_base->fclken3_core, 2, 1, 0);
+ return 0;
+}
+
+/*
+ * Initialize the OMAP3 EHCI controller and PHY.
+ * Based on "drivers/usb/host/ehci-omap.c" from Linux 2.6.37.
+ * See there for additional Copyrights.
+ */
+int ehci_hcd_init(void)
+{
+ int ret;
+
+ debug("Initializing OMAP3 EHCI\n");
+
+ ret = board_usb_init();
+ if (ret < 0)
+ return ret;
+
+ /* Put the PHY in RESET */
+ omap_ehci_phy_reset(1, 10);
+
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ /* Enable USBHOST_L3_ICLK (USBHOST_MICLK) */
+ sr32(&prcm_base->iclken_usbhost, 0, 1, 1);
+ /*
+ * Enable USBHOST_48M_FCLK (USBHOST_FCLK1)
+ * and USBHOST_120M_FCLK (USBHOST_FCLK2)
+ */
+ sr32(&prcm_base->fclken_usbhost, 0, 2, 3);
+ /* Enable USBTTL_ICLK */
+ sr32(&prcm_base->iclken3_core, 2, 1, 1);
+ /* Enable USBTTL_FCLK */
+ sr32(&prcm_base->fclken3_core, 2, 1, 1);
+ debug("USB clocks enabled\n");
+
+ /* perform TLL soft reset, and wait until reset is complete */
+ writel(OMAP_USBTLL_SYSCONFIG_SOFTRESET,
+ OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
+ /* Wait for TLL reset to complete */
+ while (!(readl(OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSSTATUS)
+ & OMAP_USBTLL_SYSSTATUS_RESETDONE))
+ ;
+ debug("TLL reset done\n");
+
+ writel(OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
+ OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
+ OMAP_USBTLL_SYSCONFIG_CACTIVITY,
+ OMAP3_USBTLL_BASE + OMAP_USBTLL_SYSCONFIG);
+
+ /* Put UHH in NoIdle/NoStandby mode */
+ writel(OMAP_UHH_SYSCONFIG_ENAWAKEUP
+ | OMAP_UHH_SYSCONFIG_SIDLEMODE
+ | OMAP_UHH_SYSCONFIG_CACTIVITY
+ | OMAP_UHH_SYSCONFIG_MIDLEMODE,
+ OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
+
+ /* setup burst configurations */
+ writel(OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
+ | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
+ | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN,
+ OMAP3_UHH_BASE + OMAP_UHH_HOSTCONFIG);
+
+ omap_ehci_phy_reset(0, 10);
+
+ hccr = (struct ehci_hccr *)(OMAP3_EHCI_BASE);
+ hcor = (struct ehci_hcor *)(OMAP3_EHCI_BASE + 0x10);
+
+ debug("OMAP3 EHCI init done\n");
+ return 0;
+}
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 91af8a0..b4d6443 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -129,6 +129,9 @@
/* USB EHCI */
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+/*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 147
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
--
1.7.6.4
More information about the U-Boot
mailing list