[U-Boot] [PATCH 2/3] fec: add the i.mx6q enet driver support
Jason Liu
jason.hui at linaro.org
Tue Dec 13 14:44:23 CET 2011
Cc: Stefano Babic <sbabic at denx.de>
Signed-off-by: Jason Liu <jason.hui at linaro.org>
---
drivers/net/fec_mxc.c | 10 ++++++++++
drivers/net/fec_mxc.h | 7 ++++++-
2 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index b05a4c0..3affda8 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -384,6 +384,14 @@ static int fec_open(struct eth_device *edev)
writel(1 << 2, &fec->eth->x_cntrl);
fec->rbd_index = 0;
+#if defined(CONFIG_MX6Q)
+ /* Enable ENET HW endian SWAP */
+ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_DBSWAP,
+ &fec->eth->ecntrl);
+ /* Enable ENET store and forward mode */
+ writel(readl(&fec->eth->x_wmrk) | FEC_X_WMRK_STRFWD,
+ &fec->eth->x_wmrk);
+#endif
/*
* Enable FEC-Lite controller
*/
@@ -485,6 +493,8 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
rcntrl = PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT;
if (fec->xcv_type == SEVENWIRE)
rcntrl |= FEC_RCNTRL_FCE;
+ else if (fec->xcv_type == RGMII)
+ rcntrl |= FEC_RCNTRL_RGMII;
else if (fec->xcv_type == RMII)
rcntrl |= FEC_RCNTRL_RMII;
else /* MII mode */
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 8b26645..39337bf 100644
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -196,6 +196,7 @@ struct ethernet_regs {
#define FEC_RCNTRL_PROM 0x00000008
#define FEC_RCNTRL_BC_REJ 0x00000010
#define FEC_RCNTRL_FCE 0x00000020
+#define FEC_RCNTRL_RGMII 0x00000040
#define FEC_RCNTRL_RMII 0x00000100
#define FEC_TCNTRL_GTS 0x00000001
@@ -206,6 +207,9 @@ struct ethernet_regs {
#define FEC_ECNTRL_RESET 0x00000001 /* reset the FEC */
#define FEC_ECNTRL_ETHER_EN 0x00000002 /* enable the FEC */
+#define FEC_ECNTRL_DBSWAP 0x00000100
+
+#define FEC_X_WMRK_STRFWD 0x00000100
#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
/* defines for MIIGSK */
@@ -261,7 +265,8 @@ enum xceiver_type {
SEVENWIRE, /* 7-wire */
MII10, /* MII 10Mbps */
MII100, /* MII 100Mbps */
- RMII /* RMII */
+ RMII, /* RMII */
+ RGMII, /* RGMII */
};
/**
--
1.7.4.1
More information about the U-Boot
mailing list