[U-Boot] [PATCH v5 3/3] mx28evk: Add initial support for MX28EVK board

[Marek Vasut]

> Hi Fabio,
> 
> On 12/16/2011 12:07 AM, Fabio Estevam wrote:
> > Tested boot via SD card and by loading a kernel via TFTP through
> > the FEC interface.
> 
> Have you any idea why this works from SD card but not by USB recovery
> using exactly same sb file?
> 
> By quick look it seems that control is not passed back to the ROM
> properly after SPL or ROM is unable to load/run U-Boot after SPL.

What do you mean? The SPL only inits the hardware and then lets the bootrom do 
whatever it wants again with the next file in u-boot.bd.