[U-Boot] [PATCH v2] net: allow setting env enetaddr from net device setting

[Rob Herring]

From: Rob Herring <rob.herring at calxeda.com>

If the net driver has setup a valid ethernet address and an ethernet
address is not set in the environment already, then set the environment
variables from the net driver setting

This enables pxe booting on boards which don't set ethaddr env variable.

Signed-off-by: Rob Herring <rob.herring at calxeda.com>
---
v2:
- Re-wrote to always setup ethaddr env variables

 doc/README.enetaddr |    4 +++-
 net/eth.c           |   19 ++++++++++++++++---
 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/doc/README.enetaddr b/doc/README.enetaddr
index 2d8e24f..6c61817 100644
--- a/doc/README.enetaddr
+++ b/doc/README.enetaddr
@@ -32,7 +32,9 @@ Correct flow of setting up the MAC address (summarized):
 
 1. Read from hardware in initialize() function
 2. Read from environment in net/eth.c after initialize()
-3. Give priority to the value in the environment if a conflict
+3. Write value to environment if setup in struct eth_device->enetaddr by driver
+   initialize() function. Give priority to the value in the environment if a
+   conflict.
 4. Program the address into hardware if the following conditions are met:
 	a) The relevant driver has a 'write_addr' function
 	b) The user hasn't set an 'ethmacskip' environment variable
diff --git a/net/eth.c b/net/eth.c
index 4280d6d..e3d8777 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -62,6 +62,15 @@ int eth_getenv_enetaddr_by_index(const char *base_name, int index,
 	return eth_getenv_enetaddr(enetvar, enetaddr);
 }
 
+int eth_setenv_enetaddr_by_index(const char *base_name, int index,
+				 uchar *enetaddr)
+{
+	char enetvar[32];
+	sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index);
+	return eth_setenv_enetaddr(enetvar, enetaddr);
+}
+
+
 static int eth_mac_skip(int index)
 {
 	char enetvar[15];
@@ -190,9 +199,13 @@ int eth_write_hwaddr(struct eth_device *dev, const char *base_name,
 	unsigned char env_enetaddr[6];
 	int ret = 0;
 
-	if (!eth_getenv_enetaddr_by_index(base_name, eth_number, env_enetaddr))
-		return -1;
-
+	if (!eth_getenv_enetaddr_by_index(base_name, eth_number, env_enetaddr)) {
+		if (!is_valid_ether_addr(dev->enetaddr))
+			return -1;
+		eth_setenv_enetaddr_by_index(base_name, eth_number,
+					     dev->enetaddr);
+		memcpy(env_enetaddr, dev->enetaddr, 6);
+	}
 	if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
 		if (memcmp(dev->enetaddr, "\0\0\0\0\0\0", 6) &&
 			memcmp(dev->enetaddr, env_enetaddr, 6)) {
-- 
1.7.5.4