[U-Boot] [PATCH v4 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28

[Fabio Estevam]

Let imx_get_mac_from_fuse function be a common function, so that other
mx28 boards can reuse it.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Change since v3:
- Add a note about the first two MAC addresses being from Freescale vendor.

 arch/arm/cpu/arm926ejs/mx28/mx28.c         |   41 ++++++++++++++++++++++++++++
 arch/arm/include/asm/arch-mx28/sys_proto.h |    2 +
 board/denx/m28evk/m28evk.c                 |   35 -----------------------
 3 files changed, 43 insertions(+), 35 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index 088c019..d82bb01 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -214,6 +214,47 @@ int cpu_eth_init(bd_t *bis)
 }
 #endif
 
+#ifdef	CONFIG_MX28_FEC_MAC_IN_OCOTP
+
+#define	MXS_OCOTP_MAX_TIMEOUT	1000000
+void imx_get_mac_from_fuse(char *mac)
+{
+	struct mx28_ocotp_regs *ocotp_regs =
+		(struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
+	uint32_t data;
+
+	memset(mac, 0, 6);
+
+	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
+
+	if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
+				MXS_OCOTP_MAX_TIMEOUT)) {
+		puts("MXS FEC: Can't get MAC from OCOTP\n");
+		return;
+	}
+
+	data = readl(&ocotp_regs->hw_ocotp_cust0);
+
+	mac[0] = 0x00;
+	mac[1] = 0x04;
+	/*
+	 * Note:
+	 *
+	 * These first two bytes are Freescale's vendor MAC prefix.
+	 *
+	 */
+	mac[2] = (data >> 24) & 0xff;
+	mac[3] = (data >> 16) & 0xff;
+	mac[4] = (data >> 8) & 0xff;
+	mac[5] = data & 0xff;
+}
+#else
+void imx_get_mac_from_fuse(char *mac)
+{
+	memset(mac, 0, 6);
+}
+#endif
+
 U_BOOT_CMD(
 	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
 	"display clocks",
diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h b/arch/arm/include/asm/arch-mx28/sys_proto.h
index be1f7db..cf5ab16 100644
--- a/arch/arm/include/asm/arch-mx28/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx28/sys_proto.h
@@ -35,4 +35,6 @@ void mx28_common_spl_init(const iomux_cfg_t *iomux_setup,
 			const unsigned int iomux_size);
 #endif
 
+void imx_get_mac_from_fuse(char *mac);
+
 #endif	/* __MX28_H__ */
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index fcee046..005446a 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -178,39 +178,4 @@ int board_eth_init(bd_t *bis)
 	return ret;
 }
 
-#ifdef	CONFIG_M28_FEC_MAC_IN_OCOTP
-
-#define	MXS_OCOTP_MAX_TIMEOUT	1000000
-void imx_get_mac_from_fuse(char *mac)
-{
-	struct mx28_ocotp_regs *ocotp_regs =
-		(struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
-	uint32_t data;
-
-	memset(mac, 0, 6);
-
-	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
-
-	if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
-				MXS_OCOTP_MAX_TIMEOUT)) {
-		printf("MXS FEC: Can't get MAC from OCOTP\n");
-		return;
-	}
-
-	data = readl(&ocotp_regs->hw_ocotp_cust0);
-
-	mac[0] = 0x00;
-	mac[1] = 0x04;
-	mac[2] = (data >> 24) & 0xff;
-	mac[3] = (data >> 16) & 0xff;
-	mac[4] = (data >> 8) & 0xff;
-	mac[5] = data & 0xff;
-}
-#else
-void imx_get_mac_from_fuse(char *mac)
-{
-	memset(mac, 0, 6);
-}
-#endif
-
 #endif
-- 
1.7.1