[U-Boot] [PATCH v4 2/3] mx28: Let dram_init be common for mx28

Fabio Estevam festevam at gmail.com
Thu Dec 15 21:38:11 CET 2011


Let dram_init function be a common function, so that other mx28 boards 
can reuse it.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v3:
- Rename dram_init to mx28_dram_init

 arch/arm/cpu/arm926ejs/mx28/mx28.c         |   21 +++++++++++++++++++++
 arch/arm/include/asm/arch-mx28/sys_proto.h |    1 +
 board/denx/m28evk/m28evk.c                 |   21 ---------------------
 3 files changed, 22 insertions(+), 21 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index d82bb01..76b2876 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -255,6 +255,27 @@ void imx_get_mac_from_fuse(char *mac)
 }
 #endif
 
+#define	HW_DIGCTRL_SCRATCH0	0x8001c280
+#define	HW_DIGCTRL_SCRATCH1	0x8001c290
+int mx28_dram_init(void)
+{
+	uint32_t sz[2];
+
+	sz[0] = readl(HW_DIGCTRL_SCRATCH0);
+	sz[1] = readl(HW_DIGCTRL_SCRATCH1);
+
+	if (sz[0] != sz[1]) {
+		puts("MX28:\n"
+			"Error, the RAM size in HW_DIGCTRL_SCRATCH0 and\n"
+			"HW_DIGCTRL_SCRATCH1 is not the same. Please\n"
+			"verify these two registers contain valid RAM size\n");
+		hang();
+	}
+
+	gd->ram_size = sz[0];
+	return 0;
+}
+
 U_BOOT_CMD(
 	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
 	"display clocks",
diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h b/arch/arm/include/asm/arch-mx28/sys_proto.h
index cf5ab16..411173e 100644
--- a/arch/arm/include/asm/arch-mx28/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx28/sys_proto.h
@@ -36,5 +36,6 @@ void mx28_common_spl_init(const iomux_cfg_t *iomux_setup,
 #endif
 
 void imx_get_mac_from_fuse(char *mac);
+int mx28_dram_init(void);
 
 #endif	/* __MX28_H__ */
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index 005446a..d6a2a50 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -70,27 +70,6 @@ int board_init(void)
 	return 0;
 }
 
-#define	HW_DIGCTRL_SCRATCH0	0x8001c280
-#define	HW_DIGCTRL_SCRATCH1	0x8001c290
-int dram_init(void)
-{
-	uint32_t sz[2];
-
-	sz[0] = readl(HW_DIGCTRL_SCRATCH0);
-	sz[1] = readl(HW_DIGCTRL_SCRATCH1);
-
-	if (sz[0] != sz[1]) {
-		printf("MX28:\n"
-			"Error, the RAM size in HW_DIGCTRL_SCRATCH0 and\n"
-			"HW_DIGCTRL_SCRATCH1 is not the same. Please\n"
-			"verify these two registers contain valid RAM size!\n");
-		hang();
-	}
-
-	gd->ram_size = sz[0];
-	return 0;
-}
-
 #ifdef	CONFIG_CMD_MMC
 static int m28_mmc_wp(int id)
 {
-- 
1.7.1



More information about the U-Boot mailing list