[U-Boot] [PATCH v6] net: ll_temac: Add LL TEMAC driver to u-boot

[Ricardo Ribalda Delgado]

Hello Stephan

I just checked it, and I am using v7 :) from:
http://patchwork.ozlabs.org/bundle/rexut/net-ll_temac/ Once it is
applied I will post the patches for xilinx-ppc440-generic (mainly
instantiate it in the config...)

I have tried to download an image with the dhcp command over 100 and
1000M... I have to work more on it, but it looks promising. If you
need an specific test, just say it, tomorrow I will be working with
the board.

Thanks again for the patch, it was very needed for u-boot.

 Regards


On Thu, Dec 22, 2011 at 19:52, Stephan Linz <linz at li-pro.net> wrote:
> Hello Recardo,
>
> Am Donnerstag, den 22.12.2011, 17:06 +0100 schrieb Ricardo Ribalda
> Delgado:
>> Hello Stefan,
>> Hello Wolfgang,
>> Hello Michal,
>>
>> I have tried the code on a Propietary Virtex5 fx board (ppc440) and it
>> works.... Thanks for your work.
>
> OK, thanks for your efforts. Would it be possible for you to test even
> the latest v7 patch? There were some critical changes between v6 and v7,
> especially timeout regime, function pointers for plattform specific
> in/out accessors, and MDIO clock calculation.
>
>
>
> --
> Best regards,
> Stephan Linz
> ______________________________________________________________________________
> MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start
> OpenDCC: http://www.li-pro.net/opendcc.phtml
> PC/M: http://www.li-pro.net/pcm.phtml
> Sourceforge: http://sourceforge.net/users/slz
> Gitorious: https://gitorious.org/~slz
>



-- 
Ricardo Ribalda