[U-Boot] [PATCH v6] net: ll_temac: Add LL TEMAC driver to u-boot

[Stephan Linz]

Am Donnerstag, den 22.12.2011, 19:58 +0100 schrieb Ricardo Ribalda
Delgado: 
> Hello Stephan

Hello Recardo,

> 
> I just checked it, and I am using v7 :) from:
> http://patchwork.ozlabs.org/bundle/rexut/net-ll_temac/ 

OK, fine.

> Once it is
> applied I will post the patches for xilinx-ppc440-generic (mainly
> instantiate it in the config...)

Nice to hear that. So we know the driver consists no bad code and can be
applied as fast as possible.

> 
> I have tried to download an image with the dhcp command over 100 and
> 1000M... I have to work more on it, but it looks promising. If you
> need an specific test, just say it, tomorrow I will be working with
> the board.
> 
> Thanks again for the patch, it was very needed for u-boot.

:)

br,
Stephan 
> 
>  Regards
> 
> 
> On Thu, Dec 22, 2011 at 19:52, Stephan Linz <linz at li-pro.net> wrote:
> > Hello Recardo,
> >
> > Am Donnerstag, den 22.12.2011, 17:06 +0100 schrieb Ricardo Ribalda
> > Delgado:
> >> Hello Stefan,
> >> Hello Wolfgang,
> >> Hello Michal,
> >>
> >> I have tried the code on a Propietary Virtex5 fx board (ppc440) and it
> >> works.... Thanks for your work.
> >
> > OK, thanks for your efforts. Would it be possible for you to test even
> > the latest v7 patch? There were some critical changes between v6 and v7,
> > especially timeout regime, function pointers for plattform specific
> > in/out accessors, and MDIO clock calculation.
> >

-- 
Best regards,
Stephan Linz
______________________________________________________________________________
MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start
OpenDCC: http://www.li-pro.net/opendcc.phtml
PC/M: http://www.li-pro.net/pcm.phtml
Sourceforge: http://sourceforge.net/users/slz
Gitorious: https://gitorious.org/~slz