[U-Boot] Pull request: u-boot-tegra/master, take 2

[Albert ARIBAUD]

Hi Tom,

Le 08/12/2011 17:48, Tom Warren a écrit :
> Albert,
>
> Here's my rebased pull request. Thanks for your patience!
>
> The following changes since commit 15422043c4a213dc5d7d59a337be1ab34c9b2e7f:
>
>    davinci: Remove unwanted memsize.c from hawkboard's nand spl build (2011-12-06 23:59:41 +0100)
>
> are available in the git repository at:
>    git://git.denx.de/u-boot-tegra.git ..BRANCH.NOT.VERIFIED..
>
> Simon Glass (9):
>        tegra2: Add arch_cpu_init() to fire up Cortex-A9
>        tegra2: Simplify tegra_start() boot path
>        arm: Move CP15 init out of cpu_init_crit()
>        tegra2: Enable instruction cache
>        tegra2: Remove unneeded boot code
>        tegra2: Remove unneeded config option
>        tegra2: Remove unused low-level Tegra2 UART code
>        tegra2: Remove unneeded 'dynamic ram size' message
>        tegra2: Don't use board pointer before it is set up
>
> Stephen Warren (4):
>        tegra2: Move board_mmc_init into board files
>        tegra2: Modify MMC driver to handle power and cd GPIOs
>        tegra2: Add support for Ventana
>        tegra2: Use new GPIO APIs in gpio_config_uart()
>
> MAINTAINERS                                        |    5 +
> arch/arm/cpu/armv7/start.S                         |   36 +++---
> arch/arm/cpu/armv7/tegra2/Makefile                 |    5 +
> arch/arm/cpu/armv7/tegra2/ap20.c                   |   54 +++++----
> arch/arm/cpu/armv7/tegra2/ap20.h                   |   10 +-
> arch/arm/cpu/armv7/tegra2/board.c                  |   35 +++---
> arch/arm/cpu/armv7/tegra2/config.mk                |    7 +-
> arch/arm/cpu/armv7/tegra2/lowlevel_init.S          |  118 --------------------
> arch/arm/include/asm/u-boot-arm.h                  |    3 +
> board/nvidia/common/board.c                        |   58 +---------
> board/nvidia/common/board.h                        |    4 +-
> board/nvidia/harmony/harmony.c                     |   57 ++++++++--
> board/nvidia/seaboard/seaboard.c                   |   81 ++++++++------
> board/nvidia/ventana/Makefile                      |   49 ++++++++
> boards.cfg                                         |    1 +
> drivers/gpio/tegra2_gpio.c                         |    6 +-
> drivers/mmc/tegra2_mmc.c                           |   42 ++++++-
> drivers/mmc/tegra2_mmc.h                           |    4 +-
> drivers/serial/Makefile                            |    1 -
> drivers/serial/serial_tegra2.c                     |   77 -------------
> include/configs/tegra2-common.h                    |    3 +-
> .../serial_tegra2.h =>  include/configs/ventana.h   |   34 +++++-
> 22 files changed, 308 insertions(+), 382 deletions(-)
> create mode 100644 board/nvidia/ventana/Makefile
> delete mode 100644 drivers/serial/serial_tegra2.c
> rename drivers/serial/serial_tegra2.h =>  include/configs/ventana.h (51%)

Applied to u-boot-arm/master, thanks!

Amicalement,
-- 
Albert.