[U-Boot] [PATCH V9 0/4] SPL Linux boot

[Simon Schwarz]

Adds direct Linux boot to SPL. It implements a spl export command to save
ATAGS or FDT to NAND flash. The kernel image has to be in place for this!

Changes in V5:
- Rebased on u-boot-ti
- fixed MAKEALL warnings and errors 
- adapted to general gpio interface
Changes in V6:
- Change old commit message

Changes in V7:
- Correct style and format errors

Changes in V8:
- rebased on u-boot

Changes in V9:
- Deleted a left-over patch from the series this also fixed the first
	problem mentioned here:
	- http://article.gmane.org/gmane.comp.boot-loaders.u-boot/119452

based on:
- Prep subcommand patch for arm
  (http://article.gmane.org/gmane.comp.boot-loaders.u-boot/106725)

Simon Schwarz (4):
  Add cmd_spl command
  omap-common: Add NAND SPL linux booting
  devkit8000/spl: init GPMC for dm9000 in SPL
  omap-common/spl: Add linux boot to SPL

 arch/arm/cpu/armv7/omap-common/spl.c      |   51 +++++++-
 arch/arm/cpu/armv7/omap-common/spl_nand.c |   64 ++++++--
 arch/arm/include/asm/omap_common.h        |    2 +
 board/timll/devkit8000/devkit8000.c       |   33 ++++-
 common/Makefile                           |    1 +
 common/cmd_spl.c                          |  224 +++++++++++++++++++++++++++++
 doc/README.commands.spl                   |   31 ++++
 include/cmd_spl.h                         |   30 ++++
 include/configs/devkit8000.h              |   13 ++-
 9 files changed, 422 insertions(+), 27 deletions(-)
 create mode 100644 common/cmd_spl.c
 create mode 100644 doc/README.commands.spl
 create mode 100644 include/cmd_spl.h

-- 
1.7.4.1