[U-Boot] [PATCH 3/6] OMAP4: Panda_mux: configure usb port1 for ulpi phy mode

Govindraj.R govindraj.raja at ti.com
Wed Dec 14 13:09:10 CET 2011


From: "Govindraj.R" <govindraj.raja at ti.com>

on panda board usb ehci port1 is connected to external ulpi
phy configure usb_ulpi pins available in mux mode4.

Signed-off-by: Govindraj.R <govindraj.raja at ti.com>
---
 board/ti/panda/panda_mux_data.h |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index 2970ccd..5b66a14 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -136,14 +136,14 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
 	{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_shutter */
 	{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)},		/* cam_strobe */
 	{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)},	/* gpio_83 */
-	{USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_cawake */
-	{USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_cadata */
-	{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_caflag */
-	{USBB1_ULPITLL_NXT, (OFF_EN | M1)},				/* hsi1_acready */
-	{USBB1_ULPITLL_DAT0, (OFF_EN | M1)},				/* hsi1_acwake */
-	{USBB1_ULPITLL_DAT1, (OFF_EN | M1)},				/* hsi1_acdata */
-	{USBB1_ULPITLL_DAT2, (OFF_EN | M1)},				/* hsi1_acflag */
-	{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)},		/* hsi1_caready */
+	{USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
+	{USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)},		/* usbb1_ulpiphy_stp */
+	{USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dir */
+	{USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_nxt */
+	{USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat0 */
+	{USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat1 */
+	{USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat2 */
+	{USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat3 */
 	{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat4 */
 	{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat5 */
 	{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)},	/* usbb1_ulpiphy_dat6 */
-- 
1.7.5.4



More information about the U-Boot mailing list