[U-Boot] [RFC PATCH 06/19] Add generic pre-relocation board_f.c

Simon Glass sjg at chromium.org
Wed Dec 28 07:35:47 CET 2011


This file handles common pre-relocation init for boards which use
the generic framework.

It starts up the console, DRAM, performs relocation and then jumps
to post-relocation init.

Signed-off-by: Simon Glass <sjg at chromium.org>
---
 board/freescale/p2020come/Makefile |    2 +
 common/Makefile                    |    1 +
 common/board_f.c                   |  430 ++++++++++++++++++++++++++++++++++++
 3 files changed, 433 insertions(+), 0 deletions(-)
 create mode 100644 common/board_f.c

diff --git a/board/freescale/p2020come/Makefile b/board/freescale/p2020come/Makefile
index d0e1997..52538fd 100644
--- a/board/freescale/p2020come/Makefile
+++ b/board/freescale/p2020come/Makefile
@@ -31,6 +31,8 @@ COBJS-y			+= tlb.o
 
 ifndef CONFIG_SYS_LEGACY_BOARD
 COBJS	+= board_r.o
+COBJS	+= board_f.o
+COBJS	+= reloc.o
 endif
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
diff --git a/common/Makefile b/common/Makefile
index 90601e6..008f131 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -38,6 +38,7 @@ COBJS-y += xyzModem.o
 
 # boards
 ifeq ($(CONFIG_SYS_LEGACY_BOARD),)
+COBJS-y += board_f.o
 COBJS-y += board_r.o
 endif
 
diff --git a/common/board_f.c b/common/board_f.c
new file mode 100644
index 0000000..f9eb4ca
--- /dev/null
+++ b/common/board_f.c
@@ -0,0 +1,430 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2002-2006
+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger at sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <version.h>
+#include <asm-generic/sections.h>
+#include <asm/io.h>
+#include <initcall.h>
+#include <post.h>
+#include <reloc.h>
+
+#ifdef CONFIG_ARM
+/* ARM uses r8 for global data so doesn't need a variable */
+DECLARE_GLOBAL_DATA_PTR;
+#else
+/*
+ * Pointer to initial global data area
+ *
+ * Here we initialize it.
+ */
+#undef	XTRN_DECLARE_GLOBAL_DATA_PTR
+#define XTRN_DECLARE_GLOBAL_DATA_PTR	/* empty = allocate here */
+DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_GD_ADDR);
+#endif
+
+/* TODO: Move to header file */
+int print_cpuinfo(void);
+
+/*
+ * sjg: IMO this code should be
+ * refactored to a single function, something like:
+ *
+ * void led_set_state(enum led_colour_t colour, int on);
+ */
+/************************************************************************
+ * Coloured LED functionality
+ ************************************************************************
+ * May be supplied by boards if desired
+ */
+inline void __coloured_LED_init(void) {}
+void coloured_LED_init(void)
+	__attribute__((weak, alias("__coloured_LED_init")));
+inline void __red_led_on(void) {}
+void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
+inline void __red_led_off(void) {}
+void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
+inline void __green_led_on(void) {}
+void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
+inline void __green_led_off(void) {}
+void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
+inline void __yellow_led_on(void) {}
+void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
+inline void __yellow_led_off(void) {}
+void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
+inline void __blue_led_on(void) {}
+void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
+inline void __blue_led_off(void) {}
+void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
+
+/*
+ * Why is gd allocated a register? Prior to reloc it might be better to
+ * just pass it around to each function in this file?
+ *
+ * After reloc one could argue that it is hardly used and doesn't need
+ * to be in a register. Or if it is it should perhaps hold pointers to all
+ * global data for all modules, so that post-reloc we can avoid the massive
+ * literal pool we get on ARM. Or perhaps just encourage each module to use
+ * a structure...
+ */
+
+/*
+ * Could the CONFIG_SPL_BUILD infection become a flag in gd?
+ */
+
+static int init_baudrate(void)
+{
+	gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
+	return 0;
+}
+
+static int display_banner(void)
+{
+	ulong bss_start, bss_end;
+
+	bss_start = _bss_start_ofs + _TEXT_BASE;
+	bss_end = _bss_end_ofs + _TEXT_BASE;
+	printf("\n\n%s\n\n", version_string);
+	debug("U-Boot code: %08lX -> %08lX  BSS: -> %08lX\n",
+	      _TEXT_BASE, bss_start, bss_end);
+
+#ifdef CONFIG_MODEM_SUPPORT
+	debug("Modem Support enabled\n");
+#endif
+#ifdef CONFIG_USE_IRQ
+	debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
+	debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
+#endif
+
+	return 0;
+}
+
+static int display_dram_config(void)
+{
+	ulong size = 0;
+	int i;
+
+	debug("RAM Configuration:\n");
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		size += gd->bd->bi_dram[i].size;
+		debug("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start);
+#ifdef DEBUG
+		print_size(gd->bd->bi_dram[i].size, "\n");
+#endif
+	}
+
+	puts("DRAM:  ");
+	print_size(size, "\n");
+
+	return 0;
+}
+
+void __dram_init_banksize(void)
+{
+#ifdef CONFIG_SYS_SDRAM_BASE
+	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_dram[0].size =  gd->ram_size;
+#endif
+}
+
+void dram_init_banksize(void)
+	__attribute__((weak, alias("__dram_init_banksize")));
+
+static int setup_global_data(void)
+{
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07);
+
+	/* compiler optimization barrier needed for GCC >= 3.4 */
+	dmb();
+	memset((void *)gd, '\0', sizeof(gd_t));
+
+	gd->mon_len = _bss_end_ofs;
+	return 0;
+}
+
+static int setup_fdt(void)
+{
+#ifdef CONFIG_OF_EMBED
+	/* Get a pointer to the FDT */
+	gd->fdt_blob = _binary_dt_dtb_start;
+#elif defined CONFIG_OF_SEPARATE
+	/* FDT is at end of image */
+	gd->fdt_blob = (void *)(_end_ofs + CONFIG_SYS_TEXT_BASE);
+#endif
+	/* Allow the early environment to override the fdt address */
+	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
+						(uintptr_t)gd->fdt_blob);
+	return 0;
+}
+
+static int setup_reloc(void)
+{
+	debug("monitor len: %08lX\n", gd->mon_len);
+	/*
+	 * Ram is setup, size stored in gd !!
+	 */
+	debug("ramsize: %08lX\n", gd->ram_size);
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
+	/*
+	 * Subtract specified amount of memory to hide so that it won't
+	 * get "touched" at all by U-Boot. By fixing up gd->ram_size
+	 * the Linux kernel should now get passed the now "corrected"
+	 * memory size and won't touch it either. This should work
+	 * for arch/ppc and arch/powerpc. Only Linux board ports in
+	 * arch/powerpc with bootwrapper support, that recalculate the
+	 * memory size from the SDRAM controller setup will have to
+	 * get fixed.
+	 */
+	gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
+#endif
+	gd->dest_addr = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;
+	gd->dest_addr_sp = gd->dest_addr;
+	return 0;
+}
+
+#if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
+static int reserve_logbuffer(void)
+{
+	/* reserve kernel log buffer */
+	gd->dest_addr -= LOGBUFF_RESERVE;
+	debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN,
+		addr);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PRAM
+/* reserve protected RAM */
+static int reserve_pram(void)
+{
+	ulong reg;
+
+	reg = getenv_ulong("pram", 10, CONFIG_PRAM);
+	gd->dest_addr -= (reg << 10);		/* size is in kB */
+	debug("Reserving %ldk for protected RAM at %08lx\n", reg,
+	      gd->dest_addr);
+	return 0;
+}
+#endif /* CONFIG_PRAM */
+
+#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
+static int reserve_mmu(void)
+{
+	/* reserve TLB table */
+	gd->dest_addr -= (4096 * 4);
+
+	/* round down to next 64 kB limit */
+	gd->dest_addr &= ~(0x10000 - 1);
+
+	gd->tlb_addr = gd->dest_addr;
+	debug("TLB table at: %08lx\n", gd->tlb_addr);
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_LCD
+static int reserve_lcd(void)
+{
+#ifdef CONFIG_FB_ADDR
+	gd->fb_base = CONFIG_FB_ADDR;
+#else
+	/* reserve memory for LCD display (always full pages) */
+	gd->dest_addr = lcd_setmem(gd->dest_addr);
+	gd->fb_base = gd->dest_addr;
+#endif /* CONFIG_FB_ADDR */
+	return 0;
+}
+#endif /* CONFIG_LCD */
+
+static int reserve_uboot(void)
+{
+	/*
+	 * reserve memory for U-Boot code, data & bss
+	 * round down to next 4 kB limit
+	 */
+	gd->dest_addr -= gd->mon_len;
+	gd->dest_addr &= ~(4096 - 1);
+
+	debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10,
+	      gd->dest_addr);
+	return 0;
+}
+
+/* reserve memory for malloc() area */
+static int reserve_malloc(void)
+{
+	gd->dest_addr_sp = gd->dest_addr - TOTAL_MALLOC_LEN;
+	debug("Reserving %dk for malloc() at: %08lx\n",
+			TOTAL_MALLOC_LEN >> 10, gd->dest_addr_sp);
+	return 0;
+}
+
+/* (permanently) allocate a Board Info struct */
+static int reserve_board(void)
+{
+	gd->dest_addr_sp -= sizeof(bd_t);
+	gd->bd = (bd_t *)gd->dest_addr_sp;
+	debug("Reserving %zu Bytes for Board Info at: %08lx\n",
+			sizeof(bd_t), gd->dest_addr_sp);
+	return 0;
+}
+
+static int setup_machine(void)
+{
+#ifdef CONFIG_MACH_TYPE
+	gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */
+#endif
+	return 0;
+}
+
+static int reserve_global_data(void)
+{
+	gd->dest_addr_sp -= sizeof(gd_t);
+	gd->new_gd = (gd_t *)gd->dest_addr_sp;
+	debug("Reserving %zu Bytes for Global Data at: %08lx\n",
+			sizeof(gd_t), gd->dest_addr_sp);
+	return 0;
+}
+
+static int reserve_stacks(void)
+{
+	/* setup stackpointer for exeptions */
+	gd->irq_sp = gd->dest_addr_sp;
+#ifdef CONFIG_USE_IRQ
+	gd->dest_addr_sp -= (CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ);
+	debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
+		CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ, gd->dest_addr_sp);
+#endif
+	/* leave 3 words for abort-stack    */
+	gd->dest_addr_sp -= 12;
+
+	/* 8-byte alignment for ABI compliance */
+	gd->dest_addr_sp &= ~0x07;
+	return 0;
+}
+
+#ifdef CONFIG_POST
+static int init_post(void)
+{
+	post_bootmode_init();
+	post_run(NULL, POST_ROM | post_bootmode_get(0));
+	return 0;
+}
+#endif
+
+static int report_dram_config(void)
+{
+	/* Ick, can we get rid of this line? */
+	gd->bd->bi_baudrate = gd->baudrate;
+
+	/* Ram is board specific, so move it to board code ... */
+	dram_init_banksize();
+	display_dram_config();	/* and display it */
+	return 0;
+}
+
+static init_fnc_t init_sequence_f[] = {
+	setup_global_data,
+	setup_fdt,
+#if defined(CONFIG_ARCH_CPU_INIT)
+	arch_cpu_init,		/* basic arch cpu dependent setup */
+#endif
+#if defined(CONFIG_BOARD_EARLY_INIT_F)
+	board_early_init_f,
+#endif
+#ifdef CONFIG_OF_CONTROL
+	fdtdec_check_fdt,
+#endif
+	timer_init,		/* initialize timer */
+#ifdef CONFIG_FSL_ESDHC
+	get_clocks,
+#endif
+	env_init,		/* initialize environment */
+	init_baudrate,		/* initialze baudrate settings */
+	serial_init,		/* serial communications setup */
+	console_init_f,		/* stage 1 init of console */
+	display_banner,		/* say that we are here */
+#if defined(CONFIG_DISPLAY_CPUINFO)
+	print_cpuinfo,		/* display cpu info (and speed) */
+#endif
+#if defined(CONFIG_DISPLAY_BOARDINFO)
+	checkboard,		/* display board info */
+#endif
+	dram_init,		/* configure available RAM banks */
+	setup_reloc,
+#if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
+	reserve_logbuffer,
+#endif
+#ifdef CONFIG_PRAM
+	reserve_pram,
+#endif
+#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
+	reserve_mmu,
+#endif
+#ifdef CONFIG_LCD
+	reserve_lcd,
+#endif
+	reserve_uboot,
+	reserve_malloc,
+	reserve_board,
+	setup_machine,
+	reserve_global_data,
+	reserve_stacks,
+#ifdef CONFIG_POST
+	init_post,
+#endif
+	report_dram_config,
+	reloc_calculate_dest,
+	reloc_make_copy,
+	reloc_elf,
+	reloc_clear_bss,
+	reloc_jump_to_copy,
+	NULL,
+};
+
+void board_init_f(ulong bootflags)
+{
+	/* TODO: perhaps declare gd as a local variable */
+
+	/* TODO: save bootflag into gd->flags */
+	if (initcall_run_list(init_sequence_f))
+		hang();
+
+	/* NOTREACHED - jump_to_copy() does not return */
+	while (1)
+		;
+}
+
+void hang(void)
+{
+	puts("### ERROR ### Please RESET the board ###\n");
+	for (;;)
+		;
+}
-- 
1.7.3.1



More information about the U-Boot mailing list