[U-Boot] [PATCH] mpc8xxx: Fix "DRAM" message formatting

[Kyle Moffett]

When the "Detected RDIMM [...]" message was added, it broke the
pretty-printing of the DRAM information during boot.

It used to look like this:
  DRAM:  2 GiB (DDR2, 64-bit, CL=4, ECC on)
         DDR Chip-Select Interleaving Mode: CS0+CS1

Right now, it looks like this:
  DRAM:  Detected RDIMM VL493T5663D-E6M
  2 GiB (DDR2, 64-bit, CL=4, ECC on)
         DDR Chip-Select Interleaving Mode: CS0+CS1

After this patch, it is:
  DRAM:  Detected RDIMM VL493T5663D-E6M
         2 GiB (DDR2, 64-bit, CL=4, ECC on)
         DDR Chip-Select Interleaving Mode: CS0+CS1

Signed-off-by: Kyle Moffett <Kyle.D.Moffett at boeing.com>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Kim Phillips <kim.phillips at freescale.com>
Cc: Andy Fleming <afleming at gmail.com>
Cc: Kumar Gala <kumar.gala at freescale.com>
---
 .../cpu/mpc8xxx/ddr/lc_common_dimm_params.c        |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 20c7db0..3f9104c 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -209,11 +209,11 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
 		if (dimm_params[i].n_ranks) {
 			if (dimm_params[i].registered_dimm) {
 				temp1 = 1;
-				printf("Detected RDIMM %s\n",
+				printf("Detected RDIMM %s\n       ",
 					dimm_params[i].mpart);
 			} else {
 				temp2 = 1;
-				printf("Detected UDIMM %s\n",
+				printf("Detected UDIMM %s\n       ",
 					dimm_params[i].mpart);
 			}
 		}
-- 
1.7.7.3