[U-Boot] Pull request: u-boot-tegra/next

[Albert ARIBAUD]

Hi Tom,

Le 23/12/2011 00:17, Tom Warren a écrit :
> Alright, I hope I've gotten it right this time. I had already done a git fetch of the u-boot-arm master (see my very first sentence below), but regardless, I followed your 'always use commands' and I believe I've gotten a valid repo. It's pushed as both 'master' and 'next' to u-boot-tegra.git.
>
> Here's the pull request, please pull into arm master. Thanks.
>
> The following changes since commit e570fe8ef2734fddc15e086b7bc344e64c907e81:
>
>    PXA: Kill last remnants of set_GPIO_mode function (2011-12-19 17:52:44 +0100)
>
> are available in the git repository at:
>    git://git.denx.de/u-boot-tegra.git master
>
> Simon Glass (14):
>        tegra2: Tidy UART selection
>        tegra2: Add UARTB support
>        tegra2: config: Enable SPI flash on Seaboard
>        tegra2: Enable SPI environment on Seaboard
>        tegra2: Implement SPI / UART GPIO switch
>        tegra2: spi: Support SPI / UART switch
>        tegra2: Plumb in SPI/UART switch code
>        tegra: Fix build error in plutux, medcom
>        tegra: Move cpu_init_cp15() to arch_cpu_init()
>        tegra: Move clock_early_init() to arch_cpu_init()
>        tegra: add clock_ll_start_uart() to enable UART prior to reloc
>        tegra: Add a function mux feature
>        tegra: Add support for UART init in cpu board.c
>        tegra: Move boards over to use arch-level board UART function
>
> Thierry Reding (7):
>        tegra2: Always build with USE_PRIVATE_LIBGCC=yes.
>        tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000.
>        tegra2: Move tegra2_mmc_init() prototype to public header.
>        tegra2: Add common Avionic Design Tamonten support.
>        tegra2: Add Avionic Design Plutux support.
>        tegra2: Add Avionic Design Medcom support.
>        tegra2: Optimize out-of-tree build for Ventana.
>
> Tom Warren (2):
>        tegra2: spi: Add SPI driver for Tegra2 SOC
>        arm: Tegra: Fix Harmony and Ventana builds in u-boot-tegra/master
>
>   MAINTAINERS                                        |    5 +
>   arch/arm/cpu/armv7/tegra2/Makefile                 |    2 +-
>   arch/arm/cpu/armv7/tegra2/board.c                  |   58 ++++
>   arch/arm/cpu/armv7/tegra2/clock.c                  |   14 +
>   arch/arm/cpu/armv7/tegra2/config.mk                |    2 +
>   arch/arm/cpu/armv7/tegra2/funcmux.c                |   58 ++++
>   arch/arm/include/asm/arch-tegra2/board.h           |   30 ++
>   arch/arm/include/asm/arch-tegra2/clock.h           |   11 +
>   arch/arm/include/asm/arch-tegra2/funcmux.h         |   41 +++
>   arch/arm/include/asm/arch-tegra2/mmc.h             |   27 ++
>   arch/arm/include/asm/arch-tegra2/tegra2.h          |    1 +
>   arch/arm/include/asm/arch-tegra2/tegra2_spi.h      |   76 ++++++
>   arch/arm/include/asm/arch-tegra2/uart-spi-switch.h |   46 ++++
>   board/avionic-design/common/tamonten.c             |  116 ++++++++
>   board/avionic-design/common/tamonten.h             |   32 +++
>   board/avionic-design/medcom/Makefile               |   50 ++++
>   board/avionic-design/medcom/medcom.c               |   45 ++++
>   board/avionic-design/plutux/Makefile               |   50 ++++
>   board/avionic-design/plutux/plutux.c               |   45 ++++
>   board/nvidia/common/Makefile                       |   47 ++++
>   board/nvidia/common/board.c                        |   73 +----
>   board/nvidia/common/board.h                        |    2 +-
>   board/nvidia/common/uart-spi-switch.c              |  138 ++++++++++
>   board/nvidia/harmony/Makefile                      |    1 -
>   board/nvidia/harmony/harmony.c                     |    2 +-
>   board/nvidia/seaboard/Makefile                     |    1 -
>   board/nvidia/seaboard/seaboard.c                   |    5 +-
>   board/nvidia/ventana/Makefile                      |    5 +-
>   boards.cfg                                         |    2 +
>   drivers/mmc/tegra2_mmc.h                           |    2 -
>   drivers/spi/Makefile                               |    1 +
>   drivers/spi/tegra2_spi.c                           |  279 ++++++++++++++++++++
>   include/configs/harmony.h                          |    3 +
>   include/configs/medcom.h                           |   64 +++++
>   include/configs/plutux.h                           |   64 +++++
>   include/configs/seaboard.h                         |   20 ++
>   include/configs/tegra2-common.h                    |    5 +-
>   include/configs/ventana.h                          |    3 +
>   38 files changed, 1353 insertions(+), 73 deletions(-)
>   create mode 100644 arch/arm/cpu/armv7/tegra2/funcmux.c
>   create mode 100644 arch/arm/include/asm/arch-tegra2/board.h
>   create mode 100644 arch/arm/include/asm/arch-tegra2/funcmux.h
>   create mode 100644 arch/arm/include/asm/arch-tegra2/mmc.h
>   create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2_spi.h
>   create mode 100644 arch/arm/include/asm/arch-tegra2/uart-spi-switch.h
>   create mode 100644 board/avionic-design/common/tamonten.c
>   create mode 100644 board/avionic-design/common/tamonten.h
>   create mode 100644 board/avionic-design/medcom/Makefile
>   create mode 100644 board/avionic-design/medcom/medcom.c
>   create mode 100644 board/avionic-design/plutux/Makefile
>   create mode 100644 board/avionic-design/plutux/plutux.c
>   create mode 100644 board/nvidia/common/Makefile
>   create mode 100644 board/nvidia/common/uart-spi-switch.c
>   create mode 100644 drivers/spi/tegra2_spi.c
>   create mode 100644 include/configs/medcom.h
>   create mode 100644 include/configs/plutux.h

As discussed with Wolfgang, applied to u-boot-arm/next, thanks.

Amicalement,
-- 
Albert.