[U-Boot] Building uImage with multiple load addresses

[Wolfgang Denk]

Dear Stefano Babic,

In message <4EF2F5DC.8010703 at denx.de> you wrote:
>
> >>> make uImage LOADADDR=0x70008000
> >>
> >> Exactly, I do the same.
> > 
> > Before, you wrote you were using 0x80008000 ...
> 
> No, I don't: I wrote that I am using 0x80008000 for MX3. Fabio wrote the
> example for MX53, and the value is correct (0x70008000). And for MX51 we
> have another one (on the MX51 the RAM starts at address 0x90000000).
> 
> There is no a general load address for all IMX SOCs.

I'm aware of this.  But this was what Fabio quoted from the Linux
messages:

> >  Kernel: arch/arm/boot/Image is ready
> >  Kernel: arch/arm/boot/zImage is ready
> > multiple load addresses: 0x80008000 0x80008000 0x10008000

This does not list 0x70008000 as an option (instead it lists
0x80008000 twice?).  So is this a bug in / deficiency of the Linux
kernel?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Philosophy:  A route of many roads leading from nowhere to nothing.
- Ambrose Bierce