[U-Boot] Building uImage with multiple load addresses

[Stefano Babic]

On 22/12/2011 10:02, Wolfgang Denk wrote:
> Dear Stefano Babic,
> 
> In message <4EF2EFF1.1030406 at denx.de> you wrote:
>>
>>> make uImage LOADADDR=0x70008000
>>
>> Exactly, I do the same.
> 
> Before, you wrote you were using 0x80008000 ...

No, I don't: I wrote that I am using 0x80008000 for MX3. Fabio wrote the
example for MX53, and the value is correct (0x70008000). And for MX51 we
have another one (on the MX51 the RAM starts at address 0x90000000).

There is no a general load address for all IMX SOCs.

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================