[U-Boot] [PATCH 0/6] OMAP4: USB: Add omap-ehci support and enable same for panda

[Govindraj.R]

From: "Govindraj.R" <govindraj.raja at ti.com>

Patch series adds ehci support for omap4 socs and enables ehci
support for panda board.

Fatls, ping and tftp was tested with this patch series.

Patch series depends on below patch for enabling aux clock
with powers external ulpi phy.
http://www.mail-archive.com/u-boot@lists.denx.de/msg72725.html

Patch series based commit id:
06e42c6e2ce269667daecd6229d0b7c813838203

Same is avialable here:
git://gitorious.org/denx_u-boot/denx_uboot_omap.git
ehci_omap4

Remember to comment out CONFIG_USB_TTY for testing on panda
from include/configs/omap4_common.h refer to below mail
for details.
http://www.mail-archive.com/u-boot@lists.denx.de/msg72674.html

Govindraj.R (6):
  omap4: usb: Add omap-ehci support
  OMAP4: clock-common: Move the usb dppl configuration to new func.
  OMAP4: Panda_mux: configure usb port1 for ulpi phy mode
  OMAP4: clocks: enable usb host clocks by default.
  OMAP4: Panda: Add hcd init and enable ehci support.
  OMAP4: config: Add usb support for panda config.

 arch/arm/cpu/armv7/omap-common/clocks-common.c |   52 ++++---
 arch/arm/cpu/armv7/omap4/clocks.c              |    5 +
 arch/arm/include/asm/ehci-omap.h               |  168 ++++++++++++++++++++
 board/ti/panda/panda.c                         |   70 ++++++++
 board/ti/panda/panda_mux_data.h                |   16 +-
 drivers/usb/host/Makefile                      |    1 +
 drivers/usb/host/ehci-omap.c                   |  202 ++++++++++++++++++++++++
 include/configs/omap4_common.h                 |    1 +
 include/configs/omap4_panda.h                  |   21 +++
 9 files changed, 508 insertions(+), 28 deletions(-)
 create mode 100644 arch/arm/include/asm/ehci-omap.h
 create mode 100644 drivers/usb/host/ehci-omap.c

-- 
1.7.5.4