[U-Boot] about flashing the u-boot

Érico Porto ericoporto2008 at gmail.com
Thu Dec 22 13:40:14 CET 2011


(bin) 1 % config cc usb
(bin) 2 % ::jtag::get_pin 4
USB open failure

ok, give up.

On 12/22/11, Érico Porto <ericoporto2008 at gmail.com> wrote:
> thank you, found the ccs interactive shell, it is located in
>
> /usr/local/Freescale/CodeWarrior_PA_10.1.1/PA/ccs/bin/ccs
>
> I has many commands, has help commands in it, and also have
> autocomplete feature with tab.
>
> Just trying to find a command that let me connect to my usb tap.
>
> Thank you!
>
> On 12/20/11, Scott Wood <scottwood at freescale.com> wrote:
>> On 12/19/2011 06:43 PM, Érico Porto wrote:
>>> Got usb-tap to work, but ONLY with code warrior - and for some reason
>>> can run it on ubuntu+unity but not on ubuntu+xfce, which loads
>>> everything except the action button in the flash programmer where you
>>> select what you will do: flash dump, erase, write...
>>
>> Please report this to support at freescale.com.
>>
>>> Any open alternative to use usb tap
>>
>> Abatron BDI3000 is a popular choice.
>>
>>> or someone know where is the command line tool that is used by the CW
>>> IDE?
>>
>> The command line backend is called CCS (not sure where in a typical
>> installation you'd find it) -- but the flash programming logic is in CW
>> itself, so if you want to do flash programming with CCS directly you'll
>> need to script it yourself.
>>
>> -Scott
>>
>>
>
>
> --
> Érico V. Porto
>


-- 
Érico V. Porto


More information about the U-Boot mailing list