[U-Boot] [PATCH] Fix building for mx51evk board

[Anatolij Gustschin]

Fix:
mx51evk.c:206:6: error: conflicting types for 'board_ehci_hcd_init'
/u-boot/include/usb/ehci-fsl.h:254:5: note: previous declaration of
'board_ehci_hcd_init' was here

We also fix board_ehci_hcd_init() for mx53loco board.
Building for mx53loco worked since <usb/ehci-fsl.h> is
not included here.

Signed-off-by: Anatolij Gustschin <agust at denx.de>
---
 board/freescale/mx51evk/mx51evk.c   |    3 ++-
 board/freescale/mx53loco/mx53loco.c |    3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 13c5941..e43aaf7 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -203,7 +203,7 @@ static void setup_usb_h1(void)
 	mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD);
 }
 
-void board_ehci_hcd_init(int port)
+int board_ehci_hcd_init(int port)
 {
 	/* Set USBH1_STP to GPIO and toggle it */
 	mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO);
@@ -228,6 +228,7 @@ void board_ehci_hcd_init(int port)
 	gpio_direction_output(MX51EVK_USBH1_HUB_RST, 0);
 	mdelay(2);
 	gpio_set_value(MX51EVK_USBH1_HUB_RST, 1);
+	return 0;
 }
 #endif
 
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index 57170ce..ea4d354 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -79,12 +79,13 @@ static void setup_iomux_uart(void)
 }
 
 #ifdef CONFIG_USB_EHCI_MX5
-void board_ehci_hcd_init(int port)
+int board_ehci_hcd_init(int port)
 {
 	/* request VBUS power enable pin, GPIO[8}, gpio7 */
 	mxc_request_iomux(MX53_PIN_ATA_DA_2, IOMUX_CONFIG_ALT1);
 	gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 0);
 	gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1);
+	return 0;
 }
 #endif
 
-- 
1.7.1