[U-Boot] Pull request: u-boot-arm/master

[Wolfgang Denk]

Dear Albert ARIBAUD,

In message <4EEF6C88.8090306 at aribaud.net> you wrote:
> Hi Wolfgang,
> 
> The following changes since commit 901de79a3792c81aefcbf207a34049e63f21362b:
> 
>    Prepare v2011.12-rc2 (2011-12-19 12:12:54 +0100)
> 
> are available in the git repository at:
>    git://git.denx.de/u-boot-arm.git master
> 
> Anatolij Gustschin (3):
>        Fix building for mx51evk board
>        ARM: sbc35_a9g20: re-add MACH_TYPE_SBC35_A9G20
>        ARM: tny_a9260: re-add MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260
> 
> Chris Lalancette (1):
>        omap4_panda: Initialize the USB phy
> 
> David Müller (ELSOFT AG) (1):
>        add print_cpuinfo to s3c24x0
> 
> Heiko Schocher (1):
>        arm, fdt: update ethernet mac address before booting Linux
> 
> Ilya Yanok (1):
>        arm926ejs: remove noop flush_dcache_all function
> 
> Manfred Rudigier (1):
>        davinci: Fixed wrong timebase clock frequency.
> 
> Marek Vasut (2):
>        M28: Fix tab indent in u-boot.bd
>        PXA: Kill last remnants of set_GPIO_mode function
> 
>   arch/arm/cpu/arm920t/s3c24x0/Makefile    |    1 +
>   arch/arm/cpu/arm920t/s3c24x0/cpu_info.c  |   54 +++++++++++++++++++++++++
>   arch/arm/cpu/arm926ejs/cache.c           |    5 --
>   arch/arm/cpu/arm926ejs/davinci/timer.c   |    2 +-
>   arch/arm/include/asm/arch-omap4/clocks.h |   63 
> ++++++++++++++++++++++++++++++
>   arch/arm/lib/bootm.c                     |    2 +
>   board/calao/sbc35_a9g20/sbc35_a9g20.c    |    1 -
>   board/calao/tny_a9260/tny_a9260.c        |    5 --
>   board/denx/m28evk/u-boot.bd              |    8 ++--
>   board/freescale/mx51evk/mx51evk.c        |    3 +-
>   board/freescale/mx53loco/mx53loco.c      |    3 +-
>   board/lubbock/lubbock.c                  |    6 +++
>   board/ti/panda/panda.c                   |   59 
> ++++++++++++++++++++++++++++
>   drivers/mmc/pxa_mmc.c                    |    5 --
>   include/configs/sbc35_a9g20.h            |    3 +
>   include/configs/tny_a9260.h              |    4 ++
>   16 files changed, 201 insertions(+), 23 deletions(-)
>   create mode 100644 arch/arm/cpu/arm920t/s3c24x0/cpu_info.c

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There's an old story about the person who wished his computer were as
easy to use as his telephone. That wish has come  true,  since  I  no
longer know how to use my telephone.