[U-Boot] [PATCH V11 09/13] OMAP3: SPL: do not call I2C init if no I2C is set.

[Stefano Babic]

Call i2c initialization in spl_board_init only if I2C
is configured for the board.

Signed-off-by: Stefano Babic <sbabic at denx.de>
CC: Tom Rini <tom.rini at gmail.com>
CC: Wolfgang Denk <wd at denx.de>
CC: Simon Schwarz <simonschwarzcor at gmail.com>
---
 arch/arm/cpu/armv7/omap3/board.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 1f33c63..889d650 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -92,7 +92,9 @@ u32 omap_boot_device(void)
 
 void spl_board_init(void)
 {
+#ifdef CONFIG_HARD_I2C
 	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
 }
 #endif /* CONFIG_SPL_BUILD */
 
-- 
1.7.5.4