[U-Boot] Pull request: u-boot-usb

[Wolfgang Denk]

Dear Remy Bohmer,

In message <CANqCtQ+-YHoMrE-A2QkbQvLi1YWJgN02o+maevub6xsgb=OSJg at mail.gmail.com> you wrote:
> The following changes since commit c90a4dd79cb17abb46689f27ff9f1c971362d6e2:
> 
>   post/post.c: Use lldiv for 64-bit divisions (2011-12-10 23:15:14 +0100)
> 
> are available in the git repository at:
>   git://git.denx.de/u-boot-usb.git master
> 
> Jana Rapava (1):
>       USB: Add generic ULPI layer and a viewport
> 
> Lei Wen (1):
>       USB: gadaget: add Marvell controller support
> 
> Lukasz Majewski (2):
>       usb:gadget:s5p USB Device Controller (UDC) implementation
>       usb:gadget:s5p Enable the USB Gadget framework at GONI
> 
> Marek Vasut (9):
>       USB: Add functionality to poll the USB keyboard via control EP
>       USB: Rework usb_kbd.c
>       USB: Drop dead code from usb_kbd.c
>       USB: Fix complaints about strict aliasing in OHCI-HCD
>       USB: Add usb_event_poll() to get keyboards working with EHCI
>       USB: MX5: Abstract out mx51 USB pixmux configuration
>       USB: MX5: Add MX5 usb post-init callback
>       USB: EHCI: Allow EHCI post-powerup configuration in board files
>       USB: efikamx: Enable USB on EfikaMX and EfikaSB
> 
> Stefan Herbrechtsmeier (4):
>       pxa: fix usb host register mismatch
>       pxa: activate the first usb host port on pxa27x by default
>       pxa: convert pxa27x_udc to use read and write functions
>       usbtty: init endpoints prior to startup events
> 
> Stefan Kristiansson (1):
>       usb: align usb_endpoint_descriptor to 16-bit boundary
> 
> Veli-Pekka Peltola (2):
>       cosmetic: remove excess whitespace from usb command help
>       usb: add help for missing start subcommand
> 
> Vincent Palatin (1):
>       ehci: speed up initialization
> 
> Wolfgang Grandegger (5):
>       ehci-fsl: correct size of ehci caplength
>       USB: MX5: add helper functions to enable USB clocks
>       USB: MX5: add generic USB EHCI support for mx51 and mx53
>       USB: mx53loco: add end enable USB host support on port 1
>       USB: mx51evk: add end enable USB host support on port 1
> 
>  Makefile                                  |    1 +
>  arch/arm/cpu/armv7/mx5/clock.c            |   72 ++
>  arch/arm/cpu/pxa/usb.c                    |    6 +-
>  arch/arm/include/asm/arch-mx5/clock.h     |    5 +
>  arch/arm/include/asm/arch-mx5/crm_regs.h  |    3 +
>  arch/arm/include/asm/arch-pxa/pxa-regs.h  |   10 +-
>  arch/arm/include/asm/arch-s5pc1xx/cpu.h   |    4 +
>  board/efikamx/Makefile                    |    4 +
>  board/efikamx/efikamx-usb.c               |  210 +++++
>  board/efikamx/efikamx.c                   |   15 +
>  board/freescale/mx51evk/mx51evk.c         |   62 ++
>  board/freescale/mx53loco/mx53loco.c       |   10 +
>  board/samsung/goni/goni.c                 |   48 +-
>  common/cmd_usb.c                          |   16 +-
>  common/usb_kbd.c                          |  928 +++++++------------
>  drivers/serial/usbtty.c                   |    4 +-
>  drivers/usb/gadget/Makefile               |    5 +
>  drivers/usb/gadget/gadget_chips.h         |    7 +
>  drivers/usb/gadget/mv_udc.c               |  499 ++++++++++
>  drivers/usb/gadget/pxa27x_udc.c           |  183 ++--
>  drivers/usb/gadget/regs-otg.h             |  271 ++++++
>  drivers/usb/gadget/s3c_udc_otg.c          |  892 ++++++++++++++++++
>  drivers/usb/gadget/s3c_udc_otg_xfer_dma.c | 1444 +++++++++++++++++++++++++++++
>  drivers/usb/host/Makefile                 |    1 +
>  drivers/usb/host/ehci-hcd.c               |   47 +-
>  drivers/usb/host/ehci-mx5.c               |  255 +++++
>  drivers/usb/host/ohci-hcd.c               |   75 +-
>  drivers/usb/ulpi/Makefile                 |   44 +
>  drivers/usb/ulpi/ulpi-viewport.c          |  118 +++
>  drivers/usb/ulpi/ulpi.c                   |  227 +++++
>  include/configs/efikamx.h                 |   47 +-
>  include/configs/mx51evk.h                 |   13 +
>  include/configs/mx53loco.h                |   13 +
>  include/configs/s5p_goni.h                |    3 +
>  include/usb/ehci-fsl.h                    |   41 +-
>  include/usb/lin_gadget_compat.h           |   62 ++
>  include/usb/mv_udc.h                      |  151 +++
>  include/usb/s3c_udc.h                     |  175 ++++
>  include/usb/ulpi.h                        |  298 ++++++
>  include/usbdescriptors.h                  |    2 +-
>  40 files changed, 5512 insertions(+), 759 deletions(-)
>  create mode 100644 board/efikamx/efikamx-usb.c
>  create mode 100644 drivers/usb/gadget/mv_udc.c
>  create mode 100644 drivers/usb/gadget/regs-otg.h
>  create mode 100644 drivers/usb/gadget/s3c_udc_otg.c
>  create mode 100644 drivers/usb/gadget/s3c_udc_otg_xfer_dma.c
>  create mode 100644 drivers/usb/host/ehci-mx5.c
>  create mode 100644 drivers/usb/ulpi/Makefile
>  create mode 100644 drivers/usb/ulpi/ulpi-viewport.c
>  create mode 100644 drivers/usb/ulpi/ulpi.c
>  create mode 100644 include/usb/lin_gadget_compat.h
>  create mode 100644 include/usb/mv_udc.h
>  create mode 100644 include/usb/s3c_udc.h
>  create mode 100644 include/usb/ulpi.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Just think of a computer as hardware you can program."
- Nigel de la Tierre