[U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board

[Dirk Behme]

On 13.12.2011 16:06, Fabio Estevam wrote:
> Jason/Dirk,
> 
> On Tue, Dec 13, 2011 at 11:30 AM, Jason Liu <jason.hui at linaro.org> wrote:
>> Add the initial support for Freescale i.MX6Q Sabre Lite board
>>
>> Signed-off-by: Dirk Behme <dirk.behme at de.bosch.com>
>> Signed-off-by: Jason Liu <jason.hui at linaro.org>
>>
>> ---
>> V2: change the default script to let linaro image boot, and also
>>    change the default env to dev 0, which is normal SD slot, not
>>    the Micro-SD slot
> 
> This is what I get on my sabrelite:
> 
> U-Boot 2011.12-rc1-00004-g06e42c6-dirty (Dec 13 2011 - 12:58:29)
> 
> CPU:   Freescale i.MX61 family rev1.0 at 792 MHz
> Reset cause: unknown reset
> Board: MX6Q-Sabre Lite
> DRAM:  1 GiB
> WARNING: Caches not enabled
> MMC:   FSL_ESDHC: 0, FSL_ESDHC: 1
> 
> (and then U-boot prompt never shows up).

I think to remember that this might happen if you have some issues with 
the SD card. At least this was my wild guess the last time I saw 
something like this ;)

Anyway, I will send you a binary for test which works for me in a 
private mail.

Best regards

Dirk