[U-Boot] [PATCH v8 2/4] mx28: Let imx_get_mac_from_fuse be common for mx28

Fabio Estevam festevam at gmail.com
Tue Dec 20 17:42:29 CET 2011


Let imx_get_mac_from_fuse function be a common function, so that other
mx28 boards can reuse it.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Changes since v7:
- Use unsigned char instead of char
Changes since v6:
- Let mac[5] be set inside mx28_adjust_mac
Changes since v5:
- Allow the MAC vendor to be overriden
Changes since v4:
- No changes
Change since v3:
- Add a note about the first two MAC addresses being from Freescale vendor.
 arch/arm/cpu/arm926ejs/mx28/mx28.c |   46 ++++++++++++++++++++++++++++++++++++
 board/denx/m28evk/m28evk.c         |   35 ---------------------------
 2 files changed, 46 insertions(+), 35 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index 088c019..ee4e337 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -214,6 +214,52 @@ int cpu_eth_init(bd_t *bis)
 }
 #endif
 
+static void __mx28_adjust_mac(int dev_id, unsigned char *mac)
+{
+	mac[0] = 0x00;
+	mac[1] = 0x04; /* Use FSL vendor MAC address by default */
+
+	if (dev_id == 1) /* Let MAC1 be MAC0 + 1 by default */
+		mac[5] += 1;
+}
+
+void mx28_adjust_mac(int dev_id, unsigned char *mac)
+	__attribute__((weak, alias("__mx28_adjust_mac")));
+
+#ifdef	CONFIG_MX28_FEC_MAC_IN_OCOTP
+
+#define	MXS_OCOTP_MAX_TIMEOUT	1000000
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	struct mx28_ocotp_regs *ocotp_regs =
+		(struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
+	uint32_t data;
+
+	memset(mac, 0, 6);
+
+	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
+
+	if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
+				MXS_OCOTP_MAX_TIMEOUT)) {
+		printf("MXS FEC: Can't get MAC from OCOTP\n");
+		return;
+	}
+
+	data = readl(&ocotp_regs->hw_ocotp_cust0);
+
+	mac[2] = (data >> 24) & 0xff;
+	mac[3] = (data >> 16) & 0xff;
+	mac[4] = (data >> 8) & 0xff;
+	mac[5] = data & 0xff;
+	mx28_adjust_mac(dev_id, mac);
+}
+#else
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
+{
+	memset(mac, 0, 6);
+}
+#endif
+
 U_BOOT_CMD(
 	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
 	"display clocks",
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index a0fabc0..005446a 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -178,39 +178,4 @@ int board_eth_init(bd_t *bis)
 	return ret;
 }
 
-#ifdef	CONFIG_M28_FEC_MAC_IN_OCOTP
-
-#define	MXS_OCOTP_MAX_TIMEOUT	1000000
-void imx_get_mac_from_fuse(int dev_id, char *mac)
-{
-	struct mx28_ocotp_regs *ocotp_regs =
-		(struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
-	uint32_t data;
-
-	memset(mac, 0, 6);
-
-	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
-
-	if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
-				MXS_OCOTP_MAX_TIMEOUT)) {
-		printf("MXS FEC: Can't get MAC from OCOTP\n");
-		return;
-	}
-
-	data = readl(&ocotp_regs->hw_ocotp_cust0);
-
-	mac[0] = 0x00;
-	mac[1] = 0x04;
-	mac[2] = (data >> 24) & 0xff;
-	mac[3] = (data >> 16) & 0xff;
-	mac[4] = (data >> 8) & 0xff;
-	mac[5] = data & 0xff;
-}
-#else
-void imx_get_mac_from_fuse(int dev_id, char *mac)
-{
-	memset(mac, 0, 6);
-}
-#endif
-
 #endif
-- 
1.7.1



More information about the U-Boot mailing list