[U-Boot] [PATCH 1/4] USB: ULPI: switch argument type from u8 to unsigned

[Simon Glass]

On Mon, Dec 12, 2011 at 2:08 AM, Igor Grinberg <grinberg at compulab.co.il> wrote:
> There is no benefit in usign u8, so switch to unsinged to reduce the
> binary image size (by 20 bytes).
>
> Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>

Some typos in commit msg, but anyway:

Acked-by: Simon Glass <sjg at chromium.org>

> ---
>  drivers/usb/ulpi/ulpi.c |   10 +++++-----
>  include/usb/ulpi.h      |    6 +++---
>  2 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/usb/ulpi/ulpi.c b/drivers/usb/ulpi/ulpi.c
> index 805e29d..1371aa6 100644
> --- a/drivers/usb/ulpi/ulpi.c
> +++ b/drivers/usb/ulpi/ulpi.c
> @@ -79,9 +79,9 @@ int ulpi_init(u32 ulpi_viewport)
>        return ulpi_integrity_check(ulpi_viewport);
>  }
>
> -int ulpi_select_transceiver(u32 ulpi_viewport, u8 speed)
> +int ulpi_select_transceiver(u32 ulpi_viewport, unsigned speed)
>  {
> -       u8 tspeed = ULPI_FC_FULL_SPEED;
> +       u32 tspeed = ULPI_FC_FULL_SPEED;
>        u32 val;
>
>        switch (speed) {
> @@ -127,9 +127,9 @@ int ulpi_set_pd(u32 ulpi_viewport, int enable)
>        return ulpi_write(ulpi_viewport, reg, val);
>  }
>
> -int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode)
> +int ulpi_opmode_sel(u32 ulpi_viewport, unsigned opmode)
>  {
> -       u8 topmode = ULPI_FC_OPMODE_NORMAL;
> +       u32 topmode = ULPI_FC_OPMODE_NORMAL;
>        u32 val;
>
>        switch (opmode) {
> @@ -154,7 +154,7 @@ int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode)
>        return ulpi_write(ulpi_viewport, &ulpi->function_ctrl, val);
>  }
>
> -int ulpi_serial_mode_enable(u32 ulpi_viewport, u8 smode)
> +int ulpi_serial_mode_enable(u32 ulpi_viewport, unsigned smode)
>  {
>        switch (smode) {
>        case ULPI_IFACE_6_PIN_SERIAL_MODE:
> diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h
> index d871290..dc78a59 100644
> --- a/include/usb/ulpi.h
> +++ b/include/usb/ulpi.h
> @@ -41,7 +41,7 @@ int ulpi_init(u32 ulpi_viewport);
>  *                ULPI_FC_LOW_SPEED,  ULPI_FC_FS4LS
>  * returns 0 on success, ULPI_ERROR on failure.
>  */
> -int ulpi_select_transceiver(u32 ulpi_viewport, u8 speed);
> +int ulpi_select_transceiver(u32 ulpi_viewport, unsigned speed);
>
>  /*
>  * Enable/disable VBUS.
> @@ -66,7 +66,7 @@ int ulpi_set_pd(u32 ulpi_viewport, int enable);
>  *
>  * returns 0 on success, ULPI_ERROR on failure.
>  */
> -int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode);
> +int ulpi_opmode_sel(u32 ulpi_viewport, unsigned opmode);
>
>  /*
>  * Switch to Serial Mode.
> @@ -78,7 +78,7 @@ int ulpi_opmode_sel(u32 ulpi_viewport, u8 opmode);
>  * Switches immediately to Serial Mode.
>  * To return from Serial Mode, STP line needs to be asserted.
>  */
> -int ulpi_serial_mode_enable(u32 ulpi_viewport, u8 smode);
> +int ulpi_serial_mode_enable(u32 ulpi_viewport, unsigned smode);
>
>  /*
>  * Put PHY into low power mode.
> --
> 1.7.3.4
>