[U-Boot] Pull request: u-boot-tegra/master

[Tom Warren]

Albert,

This is my first pull request for u-boot-tegra. Let me know if I've screwed it up in any way!

The following changes since commit 3865b6eba83707e1ad134bd42da426fd032948f5:

  MX35: flea3: changes due to hardware revision B (2011-12-05 18:31:20 +0100)

are available in the git repository at:
  git://git.denx.de/u-boot-tegra.git master

Simon Glass (9):
      tegra2: Add arch_cpu_init() to fire up Cortex-A9
      tegra2: Simplify tegra_start() boot path
      arm: Move CP15 init out of cpu_init_crit()
      tegra2: Enable instruction cache
      tegra2: Remove unneeded boot code
      tegra2: Remove unneeded config option
      tegra2: Remove unused low-level Tegra2 UART code
      tegra2: Remove unneeded 'dynamic ram size' message
      tegra2: Don't use board pointer before it is set up

Stephen Warren (4):
      tegra2: Move board_mmc_init into board files
      tegra2: Modify MMC driver to handle power and cd GPIOs
      tegra2: Add support for Ventana
      tegra2: Use new GPIO APIs in gpio_config_uart()

MAINTAINERS                                        |    5 +
arch/arm/cpu/armv7/start.S                         |   36 +++---
arch/arm/cpu/armv7/tegra2/Makefile                 |    5 +
arch/arm/cpu/armv7/tegra2/ap20.c                   |   54 +++++----
arch/arm/cpu/armv7/tegra2/ap20.h                   |   10 +-
arch/arm/cpu/armv7/tegra2/board.c                  |   35 +++---
arch/arm/cpu/armv7/tegra2/config.mk                |    7 +-
arch/arm/cpu/armv7/tegra2/lowlevel_init.S          |  118 --------------------
arch/arm/include/asm/u-boot-arm.h                  |    3 +
board/nvidia/common/board.c                        |   58 +---------
board/nvidia/common/board.h                        |    4 +-
board/nvidia/harmony/harmony.c                     |   57 ++++++++--
board/nvidia/seaboard/seaboard.c                   |   81 ++++++++------
board/nvidia/ventana/Makefile                      |   49 ++++++++
boards.cfg                                         |    1 +
drivers/gpio/tegra2_gpio.c                         |    6 +-
drivers/mmc/tegra2_mmc.c                           |   42 ++++++-
drivers/mmc/tegra2_mmc.h                           |    4 +-
drivers/serial/Makefile                            |    1 -
drivers/serial/serial_tegra2.c                     |   77 -------------
include/configs/tegra2-common.h                    |    3 +-
.../serial_tegra2.h => include/configs/ventana.h   |   34 +++++-
22 files changed, 308 insertions(+), 382 deletions(-)
create mode 100644 board/nvidia/ventana/Makefile
delete mode 100644 drivers/serial/serial_tegra2.c
rename drivers/serial/serial_tegra2.h => include/configs/ventana.h (51%)

-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------