[U-Boot] [PATCH V2 1/1] i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board

[Dirk Behme]

On 13.12.2011 17:19, Fabio Estevam wrote:
> On Tue, Dec 13, 2011 at 2:12 PM, Dirk Behme <dirk.behme at de.bosch.com> wrote:
> 
>> Looking at the binary I sent you it has
>>
>>
>> U-Boot 2011.09-01509-g1d76eb8-dirty (Dec 13 2011 - 16:28:33)
> 
> Sorry, I made a typo.
> 
> 2011.09 works fine for me, but 2011.12-rc1 does not boot my sabrelite.
> 
> Tried booting two boards (mx28 and mx6qsabrelite) using the latest
> origin/master tree,
> and both of them failed. Ok, both are not in mainline yet, so I will
> try a mx53 board next.
> 
> If your sabrelite boots on the latest master tree, please let me know.

After rebasing Jason's patches to latest git head:

U-Boot 2011.12-rc1-00010-g0626de4-dirty (Dec 14 2011 - 11:34:10)

CPU:   Freescale i.MX61 family rev1.0 at 792 MHz
Reset cause: unknown reset
Board: MX6Q-Sabre Lite
DRAM:  1 GiB
WARNING: Caches not enabled
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Hit any key to stop autoboot:  0
mmc0 is current device

** Unable to use mmc 0:2 for fatload **

** Unable to use mmc 0:2 for fatload **
Booting from net ...
Unknown command 'dhcp' - try 'help'
Wrong Image Format for bootm command
ERROR: can't get kernel image!
MX6QSABRELITE U-Boot >

Best regards

Dirk