[U-Boot] [PATCH v2 1/3] mx28: Let imx_get_mac_from_fuse be common for mx28

Marek Vasut marek.vasut at gmail.com
Thu Dec 15 18:22:49 CET 2011


> Let imx_get_mac_from_fuse function be a common function, so that other
> mx28 boards can reuse it.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
> ---
>  arch/arm/cpu/arm926ejs/mx28/mx28.c         |   35
> ++++++++++++++++++++++++++++ arch/arm/include/asm/arch-mx28/sys_proto.h | 
>   2 +
>  board/denx/m28evk/m28evk.c                 |   35
> ---------------------------- 3 files changed, 37 insertions(+), 35
> deletions(-)
> 
> diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c
> b/arch/arm/cpu/arm926ejs/mx28/mx28.c index 088c019..785978f 100644
> --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
> +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
> @@ -214,6 +214,41 @@ int cpu_eth_init(bd_t *bis)
>  }
>  #endif
> 
> +#ifdef	CONFIG_MX28_FEC_MAC_IN_OCOTP
> +
> +#define	MXS_OCOTP_MAX_TIMEOUT	1000000
> +void imx_get_mac_from_fuse(char *mac)
> +{
> +	struct mx28_ocotp_regs *ocotp_regs =
> +		(struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
> +	uint32_t data;
> +
> +	memset(mac, 0, 6);
> +
> +	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
> +
> +	if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
> +				MXS_OCOTP_MAX_TIMEOUT)) {
> +		puts("MXS FEC: Can't get MAC from OCOTP\n");
> +		return;
> +	}
> +
> +	data = readl(&ocotp_regs->hw_ocotp_cust0);
> +
> +	mac[0] = 0x00;
> +	mac[1] = 0x04;

Be careful here. 0x00 0x04 prefix might not be correct for all cases!

> +	mac[2] = (data >> 24) & 0xff;
> +	mac[3] = (data >> 16) & 0xff;
> +	mac[4] = (data >> 8) & 0xff;
> +	mac[5] = data & 0xff;
> +}
> +#else
> +void imx_get_mac_from_fuse(char *mac)
> +{
> +	memset(mac, 0, 6);
> +}
> +#endif
> +
>  U_BOOT_CMD(
>  	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
>  	"display clocks",
> diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h
> b/arch/arm/include/asm/arch-mx28/sys_proto.h index be1f7db..cf5ab16 100644
> --- a/arch/arm/include/asm/arch-mx28/sys_proto.h
> +++ b/arch/arm/include/asm/arch-mx28/sys_proto.h
> @@ -35,4 +35,6 @@ void mx28_common_spl_init(const iomux_cfg_t *iomux_setup,
>  			const unsigned int iomux_size);
>  #endif
> 
> +void imx_get_mac_from_fuse(char *mac);
> +
>  #endif	/* __MX28_H__ */
> diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
> index fcee046..005446a 100644
> --- a/board/denx/m28evk/m28evk.c
> +++ b/board/denx/m28evk/m28evk.c
> @@ -178,39 +178,4 @@ int board_eth_init(bd_t *bis)
>  	return ret;
>  }
> 
> -#ifdef	CONFIG_M28_FEC_MAC_IN_OCOTP
> -
> -#define	MXS_OCOTP_MAX_TIMEOUT	1000000
> -void imx_get_mac_from_fuse(char *mac)
> -{
> -	struct mx28_ocotp_regs *ocotp_regs =
> -		(struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
> -	uint32_t data;
> -
> -	memset(mac, 0, 6);
> -
> -	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
> -
> -	if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
> -				MXS_OCOTP_MAX_TIMEOUT)) {
> -		printf("MXS FEC: Can't get MAC from OCOTP\n");
> -		return;
> -	}
> -
> -	data = readl(&ocotp_regs->hw_ocotp_cust0);
> -
> -	mac[0] = 0x00;
> -	mac[1] = 0x04;
> -	mac[2] = (data >> 24) & 0xff;
> -	mac[3] = (data >> 16) & 0xff;
> -	mac[4] = (data >> 8) & 0xff;
> -	mac[5] = data & 0xff;
> -}
> -#else
> -void imx_get_mac_from_fuse(char *mac)
> -{
> -	memset(mac, 0, 6);
> -}
> -#endif
> -
>  #endif

Otherwise, sure, it seems OK.

M


More information about the U-Boot mailing list