[U-Boot] [PATCH 9/9] USB: efikamx: Enable USB on EfikaMX and EfikaSB
Marek Vasut
marek.vasut at gmail.com
Wed Dec 7 19:33:18 CET 2011
Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Remy Bohmer <linux at bohmer.net>
Cc: Wolfgang Grandegger <wg at denx.de>
Cc: Jason Liu <r64343 at freescale.com>
---
board/efikamx/Makefile | 4 +
board/efikamx/efikamx-usb.c | 210 +++++++++++++++++++++++++++++++++++++++++++
board/efikamx/efikamx.c | 15 +++
include/configs/efikamx.h | 47 +++++++++--
4 files changed, 270 insertions(+), 6 deletions(-)
create mode 100644 board/efikamx/efikamx-usb.c
diff --git a/board/efikamx/Makefile b/board/efikamx/Makefile
index bd1056e..fdd188e 100644
--- a/board/efikamx/Makefile
+++ b/board/efikamx/Makefile
@@ -29,6 +29,10 @@ LIB = $(obj)lib$(BOARD).o
COBJS := efikamx.o
+ifdef CONFIG_CMD_USB
+COBJS += efikamx-usb.o
+endif
+
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/efikamx/efikamx-usb.c b/board/efikamx/efikamx-usb.c
new file mode 100644
index 0000000..840bd9a
--- /dev/null
+++ b/board/efikamx/efikamx-usb.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx5x_pins.h>
+#include <asm/arch/iomux.h>
+#include <asm/gpio.h>
+#include <usb/ehci-fsl.h>
+#include <usb/ulpi.h>
+#include <errno.h>
+
+#include "../../drivers/usb/host/ehci.h"
+
+/* USB pin configuration */
+#define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
+ PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU | \
+ PAD_CTL_HYS_ENABLE | PAD_CTL_PUE_PULL)
+
+/*
+ * Configure the USB H1 and USB H2 IOMUX
+ */
+void setup_iomux_usb(void)
+{
+ setup_iomux_usb_h1();
+
+ if (machine_is_efikasb())
+ setup_iomux_usb_h2();
+
+ /* USB PHY reset */
+ mxc_request_iomux(MX51_PIN_EIM_D27, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX51_PIN_EIM_D27, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH);
+
+ /* USB HUB reset */
+ mxc_request_iomux(MX51_PIN_GPIO1_5, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_GPIO1_5, PAD_CTL_PKE_ENABLE |
+ PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH);
+
+ /* WIFI EN (act low) */
+ mxc_request_iomux(MX51_PIN_EIM_A22, IOMUX_CONFIG_GPIO);
+ mxc_iomux_set_pad(MX51_PIN_EIM_A22, 0);
+ /* WIFI RESET */
+ mxc_request_iomux(MX51_PIN_EIM_A16, IOMUX_CONFIG_GPIO);
+ mxc_iomux_set_pad(MX51_PIN_EIM_A16, 0);
+ /* BT EN (act low) */
+ mxc_request_iomux(MX51_PIN_EIM_A17, IOMUX_CONFIG_GPIO);
+ mxc_iomux_set_pad(MX51_PIN_EIM_A17, 0);
+}
+
+/*
+ * Enable devices connected to USB BUSes
+ */
+static void efika_usb_enable_devices(void)
+{
+ /* Enable Bluetooth */
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 0);
+ udelay(10000);
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 1);
+
+ /* Enable WiFi */
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A22), 1);
+ udelay(10000);
+
+ /* Reset the WiFi chip */
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 0);
+ udelay(10000);
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 1);
+}
+
+/*
+ * Reset USB HUB (or HUBs on EfikaSB)
+ */
+static void efika_usb_hub_reset(void)
+{
+ /* HUB reset */
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
+ udelay(1000);
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 0);
+ udelay(1000);
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
+}
+
+/*
+ * Reset USB PHY (or PHYs on EfikaSB)
+ */
+static void efika_usb_phy_reset(void)
+{
+ /* SMSC 3317 PHY reset */
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 0);
+ udelay(1000);
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 1);
+}
+
+static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio,
+ uint32_t alt0, uint32_t alt1)
+{
+ int ret;
+ struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
+
+ mxc_request_iomux(stp_gpio, alt0);
+ mxc_iomux_set_pad(stp_gpio, PAD_CTL_DRV_HIGH |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+ gpio_direction_output(IOMUX_TO_GPIO(stp_gpio), 0);
+ udelay(1000);
+ gpio_set_value(IOMUX_TO_GPIO(stp_gpio), 1);
+ udelay(1000);
+
+ mxc_request_iomux(stp_gpio, alt1);
+ mxc_iomux_set_pad(stp_gpio, USB_PAD_CONFIG);
+ udelay(10000);
+
+ ret = ulpi_init((u32)&ehci->ulpi_viewpoint);
+ if (ret) {
+ printf("Efika USB ULPI initialization failed\n");
+ return;
+ }
+
+ /* ULPI set flags */
+ ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl,
+ ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN |
+ ULPI_OTG_EXTVBUSIND);
+ ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->function_ctrl,
+ ULPI_FC_FULL_SPEED | ULPI_FC_OPMODE_NORMAL |
+ ULPI_FC_SUSPENDM);
+ ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->iface_ctrl, 0);
+
+ /* Set VBus */
+ ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl_set,
+ ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+
+ /*
+ * Set VBusChrg
+ *
+ * NOTE: This violates USB specification, but otherwise, USB on Efika
+ * doesn't work.
+ */
+ ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl_set,
+ ULPI_OTG_CHRGVBUS);
+}
+
+int board_ehci_hcd_init(int port)
+{
+ /* Init iMX51 EHCI */
+ efika_usb_phy_reset();
+ efika_usb_hub_reset();
+ efika_usb_enable_devices();
+
+ return 0;
+}
+
+void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
+{
+ uint32_t port = OTG_BASE_ADDR + (0x200 * CONFIG_MXC_USB_PORT);
+ struct usb_ehci *ehci = (struct usb_ehci *)port;
+ struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
+
+ ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl_set,
+ ULPI_OTG_CHRGVBUS);
+
+ wait_ms(50);
+
+ /* terminate the reset */
+ *reg = ehci_readl(status_reg);
+ *reg |= EHCI_PS_PE;
+}
+
+void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
+{
+ uint32_t tmp;
+
+ if (port == 0) {
+ /* Adjust UTMI PHY frequency to 24MHz */
+ tmp = readl(OTG_BASE_ADDR + 0x80c);
+ tmp = (tmp & ~0x3) | 0x01;
+ writel(tmp, OTG_BASE_ADDR + 0x80c);
+ } else if (port == 1) {
+ efika_ehci_init(ehci, MX51_PIN_USBH1_STP,
+ IOMUX_CONFIG_ALT2, IOMUX_CONFIG_ALT0);
+ } else if ((port == 2) && machine_is_efikasb()) {
+ efika_ehci_init(ehci, MX51_PIN_EIM_A26,
+ IOMUX_CONFIG_ALT1, IOMUX_CONFIG_ALT2);
+ }
+
+ if (port)
+ mdelay(10);
+}
diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c
index b78bf6c..59b35c7 100644
--- a/board/efikamx/efikamx.c
+++ b/board/efikamx/efikamx.c
@@ -535,6 +535,15 @@ static inline void setup_iomux_ata(void) { }
#endif
/*
+ * EHCI USB
+ */
+#ifdef CONFIG_CMD_USB
+extern void setup_iomux_usb(void);
+#else
+static inline void setup_iomux_usb(void) { }
+#endif
+
+/*
* LED configuration
*/
void setup_iomux_led(void)
@@ -683,6 +692,12 @@ int board_late_init(void)
setup_iomux_led();
setup_iomux_ata();
+ setup_iomux_usb();
+
+ if (machine_is_efikasb())
+ setenv("preboot", "usb reset ; setenv stdin usbkbd\0");
+
+ setup_iomux_led();
efikamx_toggle_led(EFIKAMX_LED_BLUE);
diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index a07c8b5..d8d8fed 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -44,6 +44,10 @@
#define CONFIG_SYS_TEXT_BASE 0x97800000
+#define CONFIG_L2_OFF
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
/*
* Bootloader Components Configuration
*/
@@ -53,6 +57,8 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DATE
#undef CONFIG_CMD_IMLS
/*
@@ -175,17 +181,46 @@
#endif
/*
+ * USB
+ */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI /* Enable EHCI USB support */
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
+#define CONFIG_MXC_USB_PORT 1
+#if (CONFIG_MXC_USB_PORT == 0)
+#define CONFIG_MXC_USB_PORTSC (1 << 28)
+#define CONFIG_MXC_USB_FLAGS MXC_EHCI_INTERNAL_PHY
+#else
+#define CONFIG_MXC_USB_PORTSC (2 << 30)
+#define CONFIG_MXC_USB_FLAGS 0
+#endif
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+#define CONFIG_PREBOOT
+/* USB NET */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#endif
+#endif /* CONFIG_CMD_USB */
+
+/*
* Filesystems
*/
#ifdef CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#endif
#endif
-
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_DATE
/*
* Miscellaneous configurable options
--
1.7.7.1
More information about the U-Boot
mailing list