[U-Boot] [Patch V6 0/4] Add basic NVIDIA Tegra2 SoC support

[Mike Rapoport]

On 02/02/11 02:09, Tom Warren wrote:
> I haven't seen any new feedback on this version (V6) of the patchset
> since it was posted.
> 
> Wolfgang, Mike, Peter, et al - are you happy with the current patch?

I'm Ok with the current patch.

> If so, when can I expect it to be pushed?
> 
> Thanks,
> 
> Tom
> 
> On Thu, Jan 27, 2011 at 1:58 PM, Tom Warren <twarren.nvidia at gmail.com> wrote:
>> This series of patches adds preliminary/baseline support for NVIDIA's
>> Tegra2 SoC.  Basic CPU (AVP), RAM and UART init are covered so that the
>> system (Harmony or Seaboard) can boot to the U-Boot serial cmd prompt.
>>
>> Further support (for Cortex-A9 CPU(s), USB, SD/MMC, etc.) to follow.
>>
>> Changes for V2:
>>        - Coding style cleanup
>>        - Remove mach-types.h change; wait for ARM kernel sync-up
>>        - Move serial driver changes to separate patch
>>        - Use board/nvidia/ instead of /board/tegra
>>        - Remove TRUE/FALSE defines
>>        - Use standard NS16550 register/bit defines in UART init
>>        - Change nv-common.h config file to tegra2-common.h
>>
>> Changes for V3:
>>        - Use I/O accessors for Tegra2 HW MMIO register access
>>        - Allow conditional compile of UARTA/UARTD code to save space
>>
>> Changes for V4:
>>        - Use address of HW structs (&pmc, etc.) in readl/writel
>>        - Remove empty lines, fix mixed case hex #s & comments in header(s)
>>        - Move board/nvidia/common/board.c UART code & header to
>>                arch/arm/cpu/armv7/tegra2/
>>        - Declare internal functions as static in UART code
>>
>> Changes for V5:
>>        - Move arch/arm/cpu/armv7/uart.c & board.h to drivers/serial and
>>                rename to serial_tegra2.c
>>        - Remove use of uart_num & UART_A/D in serial_tegra2, simplify code
>>
>> Changes for V6:
>>        - Fix uart.c add & delete in previous patchset
>>        - Move pinmux & clock init code to common board file as per review
>>        - Use #if defined() where possible in config files/UART code
>>        - Drop all typedef and volatile struct declarations in header files
>>
>> Tom Warren (4):
>>  arm: Tegra2: Add basic NVIDIA Tegra2 SoC support
>>  serial: Add Tegra2 serial port support
>>  arm: Tegra2: Add support for NVIDIA Harmony board
>>  arm: Tegra2: Add support for NVIDIA Seaboard board
>>
>>  MAINTAINERS                                  |    5 +
>>  arch/arm/cpu/armv7/tegra2/Makefile           |   48 +++++++
>>  arch/arm/cpu/armv7/tegra2/board.c            |   88 ++++++++++++
>>  arch/arm/cpu/armv7/tegra2/config.mk          |   28 ++++
>>  arch/arm/cpu/armv7/tegra2/lowlevel_init.S    |   65 +++++++++
>>  arch/arm/cpu/armv7/tegra2/sys_info.c         |   35 +++++
>>  arch/arm/cpu/armv7/tegra2/timer.c            |  122 ++++++++++++++++
>>  arch/arm/include/asm/arch-tegra2/clk_rst.h   |  165 ++++++++++++++++++++++
>>  arch/arm/include/asm/arch-tegra2/pinmux.h    |   55 ++++++++
>>  arch/arm/include/asm/arch-tegra2/pmc.h       |  124 +++++++++++++++++
>>  arch/arm/include/asm/arch-tegra2/sys_proto.h |   35 +++++
>>  arch/arm/include/asm/arch-tegra2/tegra2.h    |   49 +++++++
>>  arch/arm/include/asm/arch-tegra2/uart.h      |   47 ++++++
>>  board/nvidia/common/board.c                  |  193 ++++++++++++++++++++++++++
>>  board/nvidia/harmony/Makefile                |   50 +++++++
>>  board/nvidia/seaboard/Makefile               |   50 +++++++
>>  boards.cfg                                   |    2 +
>>  common/serial.c                              |    3 +-
>>  drivers/serial/Makefile                      |    1 +
>>  drivers/serial/serial_tegra2.c               |   77 ++++++++++
>>  drivers/serial/serial_tegra2.h               |   29 ++++
>>  include/configs/harmony.h                    |   49 +++++++
>>  include/configs/seaboard.h                   |   43 ++++++
>>  include/configs/tegra2-common.h              |  160 +++++++++++++++++++++
>>  include/serial.h                             |    3 +-
>>  25 files changed, 1524 insertions(+), 2 deletions(-)
>>  create mode 100644 arch/arm/cpu/armv7/tegra2/Makefile
>>  create mode 100644 arch/arm/cpu/armv7/tegra2/board.c
>>  create mode 100644 arch/arm/cpu/armv7/tegra2/config.mk
>>  create mode 100644 arch/arm/cpu/armv7/tegra2/lowlevel_init.S
>>  create mode 100644 arch/arm/cpu/armv7/tegra2/sys_info.c
>>  create mode 100644 arch/arm/cpu/armv7/tegra2/timer.c
>>  create mode 100644 arch/arm/include/asm/arch-tegra2/clk_rst.h
>>  create mode 100644 arch/arm/include/asm/arch-tegra2/pinmux.h
>>  create mode 100644 arch/arm/include/asm/arch-tegra2/pmc.h
>>  create mode 100644 arch/arm/include/asm/arch-tegra2/sys_proto.h
>>  create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2.h
>>  create mode 100644 arch/arm/include/asm/arch-tegra2/uart.h
>>  create mode 100644 board/nvidia/common/board.c
>>  create mode 100644 board/nvidia/harmony/Makefile
>>  create mode 100644 board/nvidia/seaboard/Makefile
>>  create mode 100644 drivers/serial/serial_tegra2.c
>>  create mode 100644 drivers/serial/serial_tegra2.h
>>  create mode 100644 include/configs/harmony.h
>>  create mode 100644 include/configs/seaboard.h
>>  create mode 100644 include/configs/tegra2-common.h
>>
>> --
>> 1.7.3.5
>>
>>


-- 
Sincerely yours,
Mike.