[U-Boot] [Patch V6 0/4] Add basic NVIDIA Tegra2 SoC support

[Tom Warren]

Mike,

On Wed, Feb 2, 2011 at 12:57 AM, Mike Rapoport <mike at compulab.co.il> wrote:
> On 02/02/11 02:09, Tom Warren wrote:
>> I haven't seen any new feedback on this version (V6) of the patchset
>> since it was posted.
>>
>> Wolfgang, Mike, Peter, et al - are you happy with the current patch?
>
> I'm Ok with the current patch.
Thanks, Mike. Appreciate your help.
>
>> If so, when can I expect it to be pushed?
Who has to push/accept/apply the patch? Wolfgang, or the ARM custodian?

Thanks.
>>
>> Thanks,
>>
>> Tom
>>
>> On Thu, Jan 27, 2011 at 1:58 PM, Tom Warren <twarren.nvidia at gmail.com> wrote:
>>> This series of patches adds preliminary/baseline support for NVIDIA's
>>> Tegra2 SoC.  Basic CPU (AVP), RAM and UART init are covered so that the
>>> system (Harmony or Seaboard) can boot to the U-Boot serial cmd prompt.
>>>
>>> Further support (for Cortex-A9 CPU(s), USB, SD/MMC, etc.) to follow.
>>>
>>> Changes for V2:
>>>        - Coding style cleanup
>>>        - Remove mach-types.h change; wait for ARM kernel sync-up
>>>        - Move serial driver changes to separate patch
>>>        - Use board/nvidia/ instead of /board/tegra
>>>        - Remove TRUE/FALSE defines
>>>        - Use standard NS16550 register/bit defines in UART init
>>>        - Change nv-common.h config file to tegra2-common.h
>>>
>>> Changes for V3:
>>>        - Use I/O accessors for Tegra2 HW MMIO register access
>>>        - Allow conditional compile of UARTA/UARTD code to save space
>>>
>>> Changes for V4:
>>>        - Use address of HW structs (&pmc, etc.) in readl/writel
>>>        - Remove empty lines, fix mixed case hex #s & comments in header(s)
>>>        - Move board/nvidia/common/board.c UART code & header to
>>>                arch/arm/cpu/armv7/tegra2/
>>>        - Declare internal functions as static in UART code
>>>
>>> Changes for V5:
>>>        - Move arch/arm/cpu/armv7/uart.c & board.h to drivers/serial and
>>>                rename to serial_tegra2.c
>>>        - Remove use of uart_num & UART_A/D in serial_tegra2, simplify code
>>>
>>> Changes for V6:
>>>        - Fix uart.c add & delete in previous patchset
>>>        - Move pinmux & clock init code to common board file as per review
>>>        - Use #if defined() where possible in config files/UART code
>>>        - Drop all typedef and volatile struct declarations in header files
>>>
>>> Tom Warren (4):
>>>  arm: Tegra2: Add basic NVIDIA Tegra2 SoC support
>>>  serial: Add Tegra2 serial port support
>>>  arm: Tegra2: Add support for NVIDIA Harmony board
>>>  arm: Tegra2: Add support for NVIDIA Seaboard board
>>>
>>>  MAINTAINERS                                  |    5 +
>>>  arch/arm/cpu/armv7/tegra2/Makefile           |   48 +++++++
>>>  arch/arm/cpu/armv7/tegra2/board.c            |   88 ++++++++++++
>>>  arch/arm/cpu/armv7/tegra2/config.mk          |   28 ++++
>>>  arch/arm/cpu/armv7/tegra2/lowlevel_init.S    |   65 +++++++++
>>>  arch/arm/cpu/armv7/tegra2/sys_info.c         |   35 +++++
>>>  arch/arm/cpu/armv7/tegra2/timer.c            |  122 ++++++++++++++++
>>>  arch/arm/include/asm/arch-tegra2/clk_rst.h   |  165 ++++++++++++++++++++++
>>>  arch/arm/include/asm/arch-tegra2/pinmux.h    |   55 ++++++++
>>>  arch/arm/include/asm/arch-tegra2/pmc.h       |  124 +++++++++++++++++
>>>  arch/arm/include/asm/arch-tegra2/sys_proto.h |   35 +++++
>>>  arch/arm/include/asm/arch-tegra2/tegra2.h    |   49 +++++++
>>>  arch/arm/include/asm/arch-tegra2/uart.h      |   47 ++++++
>>>  board/nvidia/common/board.c                  |  193 ++++++++++++++++++++++++++
>>>  board/nvidia/harmony/Makefile                |   50 +++++++
>>>  board/nvidia/seaboard/Makefile               |   50 +++++++
>>>  boards.cfg                                   |    2 +
>>>  common/serial.c                              |    3 +-
>>>  drivers/serial/Makefile                      |    1 +
>>>  drivers/serial/serial_tegra2.c               |   77 ++++++++++
>>>  drivers/serial/serial_tegra2.h               |   29 ++++
>>>  include/configs/harmony.h                    |   49 +++++++
>>>  include/configs/seaboard.h                   |   43 ++++++
>>>  include/configs/tegra2-common.h              |  160 +++++++++++++++++++++
>>>  include/serial.h                             |    3 +-
>>>  25 files changed, 1524 insertions(+), 2 deletions(-)
>>>  create mode 100644 arch/arm/cpu/armv7/tegra2/Makefile
>>>  create mode 100644 arch/arm/cpu/armv7/tegra2/board.c
>>>  create mode 100644 arch/arm/cpu/armv7/tegra2/config.mk
>>>  create mode 100644 arch/arm/cpu/armv7/tegra2/lowlevel_init.S
>>>  create mode 100644 arch/arm/cpu/armv7/tegra2/sys_info.c
>>>  create mode 100644 arch/arm/cpu/armv7/tegra2/timer.c
>>>  create mode 100644 arch/arm/include/asm/arch-tegra2/clk_rst.h
>>>  create mode 100644 arch/arm/include/asm/arch-tegra2/pinmux.h
>>>  create mode 100644 arch/arm/include/asm/arch-tegra2/pmc.h
>>>  create mode 100644 arch/arm/include/asm/arch-tegra2/sys_proto.h
>>>  create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2.h
>>>  create mode 100644 arch/arm/include/asm/arch-tegra2/uart.h
>>>  create mode 100644 board/nvidia/common/board.c
>>>  create mode 100644 board/nvidia/harmony/Makefile
>>>  create mode 100644 board/nvidia/seaboard/Makefile
>>>  create mode 100644 drivers/serial/serial_tegra2.c
>>>  create mode 100644 drivers/serial/serial_tegra2.h
>>>  create mode 100644 include/configs/harmony.h
>>>  create mode 100644 include/configs/seaboard.h
>>>  create mode 100644 include/configs/tegra2-common.h
>>>
>>> --
>>> 1.7.3.5
>>>
>>>
>
>
> --
> Sincerely yours,
> Mike.
>