[U-Boot] [PATCH 12/15] ATMEL: fix dataflash (dirty)
Reinhard Meyer
u-boot at emk-elektronik.de
Fri Feb 18 13:50:10 CET 2011
Signed-off-by: Reinhard Meyer <u-boot at emk-elektronik.de>
---
drivers/spi/atmel_dataflash_spi.c | 94 ++++++++++++++++++++++--------------
include/dataflash.h | 1 -
2 files changed, 57 insertions(+), 38 deletions(-)
diff --git a/drivers/spi/atmel_dataflash_spi.c b/drivers/spi/atmel_dataflash_spi.c
index 4a5c4aa..6e632cc 100644
--- a/drivers/spi/atmel_dataflash_spi.c
+++ b/drivers/spi/atmel_dataflash_spi.c
@@ -21,13 +21,21 @@
#include <common.h>
#ifndef CONFIG_AT91_LEGACY
-#define CONFIG_AT91_LEGACY
-#warning Please update to use C structur SoC access !
+# define CONFIG_AT91_LEGACY
+# warning Please update to use C structur SoC access !
#endif
-#include <asm/arch/hardware.h>
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+
+#include <asm/io.h>
+
#include <asm/arch/clk.h>
+#include <asm/arch/hardware.h>
+
+#include "atmel_spi.h"
+
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/at91_spi.h>
@@ -41,18 +49,18 @@
void AT91F_SpiInit(void)
{
/* Reset the SPI */
- writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR);
+ writel(AT91_SPI_SWRST, ATMEL_BASE_SPI0 + AT91_SPI_CR);
/* Configure SPI in Master Mode with No CS selected !!! */
writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS,
- AT91_BASE_SPI + AT91_SPI_MR);
+ ATMEL_BASE_SPI0 + AT91_SPI_MR);
/* Configure CS0 */
writel(AT91_SPI_NCPHA |
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
- AT91_BASE_SPI + AT91_SPI_CSR(0));
+ ATMEL_BASE_SPI0 + AT91_SPI_CSR(0));
#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1
/* Configure CS1 */
@@ -60,7 +68,7 @@ void AT91F_SpiInit(void)
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
- AT91_BASE_SPI + AT91_SPI_CSR(1));
+ ATMEL_BASE_SPI0 + AT91_SPI_CSR(1));
#endif
#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS2
/* Configure CS2 */
@@ -68,7 +76,7 @@ void AT91F_SpiInit(void)
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
- AT91_BASE_SPI + AT91_SPI_CSR(2));
+ ATMEL_BASE_SPI0 + AT91_SPI_CSR(2));
#endif
#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3
/* Configure CS3 */
@@ -76,21 +84,22 @@ void AT91F_SpiInit(void)
(AT91_SPI_DLYBS & DATAFLASH_TCSS) |
(AT91_SPI_DLYBCT & DATAFLASH_TCHS) |
((get_mck_clk_rate() / AT91_SPI_CLK) << 8),
- AT91_BASE_SPI + AT91_SPI_CSR(3));
+ ATMEL_BASE_SPI0 + AT91_SPI_CSR(3));
#endif
/* SPI_Enable */
- writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
+ writel(AT91_SPI_SPIEN, ATMEL_BASE_SPI0 + AT91_SPI_CR);
- while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS));
+ while (!(readl(ATMEL_BASE_SPI0 + AT91_SPI_SR) & AT91_SPI_SPIENS))
+ ;
/*
* Add tempo to get SPI in a safe state.
* Should not be needed for new silicon (Rev B)
*/
udelay(500000);
- readl(AT91_BASE_SPI + AT91_SPI_SR);
- readl(AT91_BASE_SPI + AT91_SPI_RDR);
+ readl(ATMEL_BASE_SPI0 + AT91_SPI_SR);
+ readl(ATMEL_BASE_SPI0 + AT91_SPI_RDR);
}
@@ -100,33 +109,33 @@ void AT91F_SpiEnable(int cs)
switch (cs) {
case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */
- mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
+ mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
- AT91_BASE_SPI + AT91_SPI_MR);
+ ATMEL_BASE_SPI0 + AT91_SPI_MR);
break;
case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */
- mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
+ mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
- AT91_BASE_SPI + AT91_SPI_MR);
+ ATMEL_BASE_SPI0 + AT91_SPI_MR);
break;
case 2: /* Configure SPI CS2 for Serial DataFlash AT45DBxx */
- mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
+ mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS2_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
- AT91_BASE_SPI + AT91_SPI_MR);
+ ATMEL_BASE_SPI0 + AT91_SPI_MR);
break;
case 3:
- mode = readl(AT91_BASE_SPI + AT91_SPI_MR);
+ mode = readl(ATMEL_BASE_SPI0 + AT91_SPI_MR);
mode &= 0xFFF0FFFF;
writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS),
- AT91_BASE_SPI + AT91_SPI_MR);
+ ATMEL_BASE_SPI0 + AT91_SPI_MR);
break;
}
/* SPI_Enable */
- writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR);
+ writel(AT91_SPI_SPIEN, ATMEL_BASE_SPI0 + AT91_SPI_CR);
}
unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc);
@@ -134,37 +143,48 @@ unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc);
unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc)
{
unsigned int timeout;
+ unsigned int timebase;
pDesc->state = BUSY;
- writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
+ writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS,
+ ATMEL_BASE_SPI0 + AT91_SPI_PTCR);
/* Initialize the Transmit and Receive Pointer */
- writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR);
- writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR);
+ writel((unsigned int)pDesc->rx_cmd_pt,
+ ATMEL_BASE_SPI0 + AT91_SPI_RPR);
+ writel((unsigned int)pDesc->tx_cmd_pt,
+ ATMEL_BASE_SPI0 + AT91_SPI_TPR);
/* Intialize the Transmit and Receive Counters */
- writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR);
- writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR);
+ writel(pDesc->rx_cmd_size, ATMEL_BASE_SPI0 + AT91_SPI_RCR);
+ writel(pDesc->tx_cmd_size, ATMEL_BASE_SPI0 + AT91_SPI_TCR);
if (pDesc->tx_data_size != 0) {
/* Initialize the Next Transmit and Next Receive Pointer */
- writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR);
- writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR);
+ writel((unsigned int)pDesc->rx_data_pt,
+ ATMEL_BASE_SPI0 + AT91_SPI_RNPR);
+ writel((unsigned int)pDesc->tx_data_pt,
+ ATMEL_BASE_SPI0 + AT91_SPI_TNPR);
/* Intialize the Next Transmit and Next Receive Counters */
- writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR);
- writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR);
+ writel(pDesc->rx_data_size,
+ ATMEL_BASE_SPI0 + AT91_SPI_RNCR);
+ writel(pDesc->tx_data_size,
+ ATMEL_BASE_SPI0 + AT91_SPI_TNCR);
}
/* arm simple, non interrupt dependent timer */
- reset_timer_masked();
+ timebase = get_timer(0);
timeout = 0;
- writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR);
- while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) &&
- ((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT));
- writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR);
+ writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN,
+ ATMEL_BASE_SPI0 + AT91_SPI_PTCR);
+ while (!(readl(ATMEL_BASE_SPI0 + AT91_SPI_SR) & AT91_SPI_RXBUFF) &&
+ ((timeout = get_timer(timebase)) < CONFIG_SYS_SPI_WRITE_TOUT))
+ ;
+ writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS,
+ ATMEL_BASE_SPI0 + AT91_SPI_PTCR);
pDesc->state = IDLE;
if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) {
diff --git a/include/dataflash.h b/include/dataflash.h
index 63b3bf9..96ac097 100644
--- a/include/dataflash.h
+++ b/include/dataflash.h
@@ -34,7 +34,6 @@
#define _DataFlash_h
-#include <asm/arch/hardware.h>
#include "config.h"
/*number of protected area*/
--
1.5.6.5
More information about the U-Boot
mailing list