[U-Boot] [PATCH 18/18] Make the at91sam9263ek compile again.

[Uli Raich]

Dear Reinhard,
Yes, the problems were mainly due to my ignorance with respect to git: I thought that rework110218 was just a later version of rework110202, which is clearly not the case.
I probably also did not create a new branch, which had the effect that you see 17 patches, which were not mine.
Ok, I think I am slowly improving. I started from scratch and first compiled your at91sam9260ek version, which compiles fine when using the nand flash version but fails on the dataflash version.
Then I modified my files, always watching what you had done in the at91sam9260ek version. I think that now I exclusively touch files that are specific to the at91sam9263ek and nothing else.
I will still take a few days to check everything before making another attempt to send the patches.
Thanks again for your patience with me.
Uli

Sorry, this has to get a full NAK.

1. Please never hijack someone's thread! Your patch has nothing to do with
someone's PATCH 18/18.

2. You are undoing all rework efforts with this patch!
The rework was, amongst others, to get rid of all AT91_*, AT91<SoC>_*, AVR*
macros and unify them into ATMEL_* macros. And by that also remove the twofold
re-wrapping of those defines.


It seems you have not understood the concept of "CONFIG_" macros.
They are to allow the designer to use different USARTs, not
explicitly only the one in the debug unit...

3. And, please, run your patches through checkpatch.pl

Best Regards,
Reinhard