[U-Boot] building enc28j60 for omap3: SILICON ERRATA

[jacopo mondi]

On Wed, 23 Feb 2011 23:32:01 +0100
Anatolij Gustschin <agust at denx.de> wrote:

> You will have to implement the Master Transmit-Receive Mode
> (full-duplex) in the omap3_spi driver for proper enc28j60 register
> and buffer access. Currently this driver is using Tx-Only Mode
> for transmitting a Rx-Only Mode for receiving. But it shouldn't
> be too hard to fix the spi driver. What is needed is a kind
> of merge of omap3_spi_read/omap3_spi_write routines.
> 
> HTH
> Anatolij
Thank you Anatolij, I'm reading OMAP datasheet in these days...
Hope I'll provide something during next week.